Construction and Plant

Mobil Delvac XHP^TM ESP FE 5W-30 is an extra high performance diesel engine oil engineered to provide outstanding protection and fuel economy potential* in modern, high performance, low emission engines used in severe on-highway applications.

Agrimax® HY is a hydraulic/transmission fluid formulated with high quality mineral oils and specialised additives for use in agricultural and plant equipment, where the Case MS1207/1209 specifications are called for.

Morris Brake Fluid is made from high molecular weight polyalkylene glycol ethers and polyalkylene glycol ether borates, to give a high boiling point fluid of DOT 4 quality.

Morris Duplex CDX 15W/40 is a mixed fleet lubricant, incorporating high quality minerals oils and performance additives, suitable for use in a wide variety of diesel and petrol engine designs, including turbocharged versions. This grade will protect engine components from rust and corrosion and provide high levels of engine cleanliness, even in extended oil drain applications.

Morris EP80W-90 Gear Oil is designed for use in a wide variety of applications, including: manual gearboxes, transaxles, transfer boxes, PTO boxes, reduction hubs/gear, differentials (including hypoid designs), axles, planetary and epicyclic drives, shaft drives, sprocket drives, track drives, track rollers, track idlers, hoist/winch gearboxes, steering boxes, oil lubricated bearings, swivel housings, swing gearboxes, slewing rings/gears, etc.

Morris EP 85W-140 Gear Oil is designed for use in a wide variety of applications, including: manual gearboxes, transaxles, transfer boxes, PTO boxes, reduction hubs/gear, differentials (including hypoid designs), axles, planetary and epicyclic drives, shaft drives, sprocket drives, track drives, track rollers, track idlers, hoist/winch gearboxes, steering boxes, oil lubricated bearings, swivel housings, swing gearboxes, slewing rings/gears, etc.

Morris GEO Plus MA 40 is a premium high performance, medium ash gas engine oil formulated to lubricate high-output, 4-cycle natural gas engines operating on special gases such as landfill and Bio digestion. The product has specially been developed for use in environments where the gas feed is at its harshest including high levels of H2S.

Morris GEO LZ 40 is a premium high performance, low ash gas engine oil formulated to lubricate high-output, 4-cycle natural gas engines operating on special gases such as landfill and bio digestion.

Morris GEO Ultra Plus 40 is a premium high performance, low ash gas engine oil formulated
to lubricate high-output, 4-cycle natural gas engines operating on special gases such as
landfill and Bio digestion.

Developed to offer improved performance capable of meeting the demands of vane pumps used in biogas digestion plants. Formulated from high quality Group II base oils and a combination of ashless additives that provide excellent
oxidation stability, protection against rust & corrosion, low foaming and excellent demulsibility.

Manufactured from a Calcium soap base and highly refined mineral oil, with added graphite to provide boundary lubrication and protection against seizure in conditions when ordinary greases would fail. Also included in this grease are additives to prevent corrosion, rust and oxidation. Additionally, this grease shows excellent resistance to severe mechanical working.

K2 EP Lithium Complex Red Grease is a mineral oil based lithium complex soap thickened grease, containing performance additives. The additives provide extreme pressure (EP), oxidation, rust and corrosion protection, ensuring effective lubrication is achieved even under the most severe conditions. It has excellent sealing properties which help protect bearings against corrosive atmospheres and the ingress

K3 is a premium quality, water resistant grease for use in industrial and marine applications where the presence of water and humid atmospheres can effect lubricating performance and be detrimental to the protection of parts from corrosion. K3 is further enhanced with a special additive which provides additional protection and lubrication in areas where excessive levels of water are prevalent such

Premium Blue lithium / calcium base grease is an extremely sophisticated lithium / calcium base grease which incorporates modern polymer technology. This advanced grease has a high level of water tolerance, mechanical stability and adherence. has exceptional load carrying ability and will cope with constant high levels of loads and shock loading. Its wide application temperature range makes

A lead free anti seize compound, made from high quality mineral oils, bentonite (clay) thickener and fine copper powder. Anti-seize properties enable this grease to work even if the joints become so compressed that most of the compound is squeezed out, or excessive temperature flashes off the oily part of the compound. A fine film of copper particles always remain in joints or threads to prevent seizure

This semi fluid, soft lithium based greases has been specially designed for use in centralised lubrication systems. It is easily pumped, has superb oxidation resistance, exceptional mechanical stability, good water resistance and rust protection and can be used over a wide range of operating temperatures.It conforms to all leading bearing manufacturers specifications for general purpose

This range of semi fluid, soft Lithium based greases have been specially designed for use in centralised lubrication systems. They are easily pumped, have superb oxidation resistance, exceptional mechanical stability, good water resistance and rust protection and can be used over a wide range of operating temperatures. They conform to all leading bearing manufacturers specifications for general purpose

This  semi fluid, soft Lithium based greases has been specially designed for use in centralised lubrication systems. It is easily pumped, has superb oxidation resistance, exceptional mechanical stability, good water resistance and rust protection and can be used over a wide range of operating temperatures.It conforms to all leading bearing manufacturers specifications for general purpose

These multipurpose Lithium based greases are prepared from highly refined mineral oil, with the addition of powerful sulphur phosphorus extreme pressure additives. This range of greases has exceptional mechanical stability, maintaining their consistency even after severe working. They are resistant to water washing, protect against rust and are non-corrosive to non-ferrous bearing metals and steel

This Lithium grease is highly recommended for all automotive use where a multipurpose grease is required for wheel bearings and chassis lubrication. This grease is particularly suited for the lubrication of construction and mining equipment such as bulldozers, scrapers, loading shovel and all off highway trucks where greased components are subjected to continuous heavy loads and shock loads.

K48 is specially formulated for use in industrial equipment, cars, vans, trucks and construction plant such as bulldozers, scrapers, loading shovels and dump trucks where it will give superior performance, in all industrial plain and rolling element bearings.

K6 is a premium quality, water resistance grease for use in industrial and marine applications where the presence of water and humid atmospheres can effect lubricating performance and be detrimental to the protection of parts from corrosion. K6 is further enhanced with a special additive which provides additional protection and lubrication in areas where excessive levels of water are prevalent such

K90 Calcium Sulphonate Complex Grease has been developed as a high performance grease for construction
plant such as bulldozers, scrapers, loading shovels and dump trucks where it will give outstanding performance.
It is also recommended for use in industrial equipment operating at high temperatures or exposed to salt water.

A specially developed grease using a semi-synthetic blend of base oils manufactured with a bentone thickener containing a high level of graphite and synergistic EP-additives and antioxidants designed particularly for hydraulic hammer lubrication, pin and bush type of applications on large earth moving and general off-road heavy plant machinery.

Morris Liquimatic 33G is recommended for use in all Ford automatic transmissions where a M2C 33G qualified product has been specified. Other transmission applications include Borg Warner, ITL (JCB) and certain Land Rover units.

Liquimatic D46 is designed to provide outstanding hydraulic system efficiency, clean performance, excellent oxidation and thermal stability. The high level of anti-wear properties and excellent film strength result in a high degree of equipment protection that not only results in fewer breakdowns but helps improve production capacity.

Morris Liquimatic DII is recommended for use in all applications where a Dexron® IID is specified, including: automatic transmissions, powershift transmissions, fluid drives, torque converters, power steering units, motorcycle suspension forks, hydraulic systems, brake boosters, transfer boxes, PTOs, hydrostatic drives, etc.

Recommended for both Industrial and off highway hydraulic systems, where extreme operating conditions are encountered. Can also be used in hydrostatic drives, power steering systems, brake systems and other applications where products of this type and specification required.

Recommended for both Industrial and off highway hydraulic systems, where extreme operating conditions are encountered. Can also be used in hydrostatic drives, power steering systems, brake systems and other applications where products of this type and specification required.

A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater. Excellent anti-wear and EP properties provide protection against wear in the most demanding of systems.

A mineral based zinc free ISO VG 15 hydraulic oil for use in certain powersteering and brake activator systems, including JCB where specified.     

A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater.

A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater.

A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater. Excellent anti-wear and EP properties provide protection against wear in the most demanding of systems.

A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater. Excellent anti-wear and EP properties provide protection against wear in the most demanding of systems.

A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater. Excellent anti-wear and EP properties provide protection against wear in the most demanding of systems.

A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater. Excellent anti-wear and EP properties provide protection against wear in the most demanding of systems.

Morris Liquimatic Super ATF is an automatic transmission fluid blended from high quality mineral oil, synthetic base fluids and a balanced additive system. This grade has superior performance in terms of frictional characteristics, seal compatibility, oxidation stability, low temperature fluidity and resistance to high temperatures encountered during severe operating conditions.

Morris Lubricants Liquimatic XT284 is recommended for use in highly stressed plant and off-highway transmission systems incorporating wet brake technology

Liquisafe 46 is a high quality fire resistant hydraulic fluid blended with high and low molecular weight polyalkylene glycols in a stable water solution. The formulation includes special chemical additives that inhibit the formation of rust in the system, and provide anti-wear properties equal to that of mineral hydraulic oils. This product is compatible with all seals normally found in systems

Advanced mineral oil based gear oil providing total driveline protection in gearboxes and differentials. Meets the following specifications:

Lydian Degreaser is recommended for removal of oil grease and dirt from metal, paintwork and concrete. Typical uses include cleaning used engines prior to overhaul, removing build-up on pipes and steelworks, cleaning concrete and brickwork. Many uses can be found in factories, yards and

compounds, where oil and grease build up is a problem, or perhaps even dangerous for vehicles and pedestrians. 

Magnol HVI46 High Viscosity Index Oil is recommended for both Industrial and off highway hydraulic systems, where extreme operating conditions are encountered. Can also be used in hydrostatic drives, power steering systems, brake systems and other applications where products of this type and specification required.

Universal Anti-freeze will protect all engines from frost damage right down to -34oC and ice damage down to -50oC (at 50% of total coolant volume). It also provides outstanding protection against rust and corrosion for all parts of the cooling system and is therefore recommended for all year round use. This Ethylene Glycol based antifreeze, which meets the technical requirements of BS6580