Morris Lubricants

Morris GEO Plus MA 40 is a premium high performance, medium ash gas engine oil formulated to lubricate high-output, 4-cycle natural gas engines operating on special gases such as landfill and Bio digestion. The product has specially been developed for use in environments where the gas feed is at its harshest including high levels of H2S.

Morris GEO Ultra Plus 40 is a premium high performance, low ash gas engine oil formulated
to lubricate high-output, 4-cycle natural gas engines operating on special gases such as
landfill and Bio digestion.

Morris GEO LZ 40 is a premium high performance, low ash gas engine oil formulated to lubricate high-output, 4-cycle natural gas engines operating on special gases such as landfill and bio digestion.

Morris Locomax ZF 20W-40 ZF is blended to comply with the performance levels specified by the

Locomotive Maintenance Officers Association (LMOA) for Generations 4, 5 and 6. It also fulfils
the requirements of API CF.

Developed to offer improved performance capable of meeting the demands of vane pumps used in biogas digestion plants. Formulated from high quality Group II base oils and a combination of ashless additives that provide excellent
oxidation stability, protection against rust & corrosion, low foaming and excellent demulsibility.

Specifically designed for the lubrication of Traction Motor gears commonly found on Diesel-Electric
locomotives operating on the rail networks and heritage lines.

A range of fully synthetic gear oils, manufactured from polyalkylene glycol (PAG) fluids and specialised extreme pressure (EP) additives, to provide outstanding protection at all temperatures to industrial gear systems. Unlike conventional gear oils PAG fluids maintain an effective lubricating film over a wide operating temperature range, from artic conditions to high thermal loadings.

A range of fully synthetic gear oils, manufactured from polyalkylene glycol (PAG) fluids and specialised extreme pressure (EP) additives, to provide outstanding protection at all temperatures to industrial gear systems. Unlike conventional gear oils PAG fluids maintain an effective lubricating film over a wide operating temperature range, from artic conditions to high thermal loadings. PAG Fluids

A range of fully synthetic gear oils, manufactured from polyalkylene glycol (PAG) fluids and specialised extreme pressure (EP) additives, to provide outstanding protection at all temperatures to industrial gear systems. Unlike conventional gear oils PAG fluids maintain an effective lubricating film over a wide operating temperature range, from artic conditions to high thermal loadings.

A range of fully synthetic gear oils, manufactured from polyalkylene glycol (PAG) fluids and specialised extreme pressure (EP) additives, to provide outstanding protection at all temperatures to industrial gear systems. Unlike conventional gear oils PAG fluids maintain an effective lubricating film over a wide operating temperature range, from artic conditions to high thermal loadings. PAG Fluids

Terralus AIR-O-LUBE is a pale amber liquid derived from natural vegetable oils blended with performance enhancing additives. It has low toxicity and is readily biodegradable. Terralus AIR-O-LUBE is a specially balanced formulation for use through metered mist air equipment to ensure economical lubricant utilisation and eliminates fluid loss associated with flood coolants. It has a high affinity to metal surfaces giving superior adhesion and on contact, the airborne droplets cling to minimise back scatter.

Multitrans MTS 75W-90 gear oil is designed and recommended for use in non-syncronised manual gearboxes, differentials and final drives, where a SAE 75W-90, complying with one of the following performance levels, is specified. API GL-5, API MT-1, SAE J2360, Scania STO 1:0, MIL-PRF-2105E.

Lodexol HPS 75W-90 gear oil is designed and recommended for use in manual gearboxes, semiautomatic gearboxes, transaxles, transfer boxes, differentials and final drives, where a SAE 75W-90 lubricant of this performance level is specified.

Multitrans SA 75W-140 is designed and recommended for use in heavy duty axle / differential applications including Scania units requiring a lubricants with a STO 2:0A qualification.

AIR FORCE 8000 FS is a range of ester based, fully synthetic, compressor lubricants designed specifically to meet the requirements of rotary screw compressors including modern, variable speed types. They incorporate the latest additive technology and have proved to be far superior in performance to conventional oils under all conditions.

Hard metals such as tungsten carbide contain significant amounts of Cobalt in their make-up. It has been shown* that if released into the work place, Cobalt poses a health hazard to machine operators. If conventional synthetic grinding fluids are used to grind carbides, Cobalt is automatically released into the fluid and builds up to harmful levels. A specialist product is therefore required to prevent

AIR FORCE 8000 FS is a range of ester based, fully synthetic, compressor lubricants designed specifically to meet the requirements of rotary screw compressors including modern, variable speed types. They incorporate the latest additive technology and have proved to be far superior in performance to conventional oils under all conditions.

Terralus UTTO is a biodegradable multi-functional tractor transmission fluid that can be used in transmissions, hydraulics, oil immersed (wet brakes), PTOs and final drive systems. The product has been carefully formulated from raw materials that have demonstrated a level of biodegradability that makes it an ideal candidate for use where environmental impact must be reduced to a minimum.

Morris K65 is an industrial, extreme temperature, medium consistency plain and rolling bearing grease for applications at operating temperatures up to 600°C.

Typical applications include: kiln car bearings, furnace doors, drying tunnel mechanisms and other applications where high temperatures are encountered.

AIR FORCE 8000 FS is a range of ester based, fully synthetic, compressor lubricants designed specifically to meet the requirements of rotary screw compressors including modern, variable speed types. They incorporate the latest additive technology and have proved to be far superior in performance to conventional oils under all conditions.

A range of gear oils, combining synthetic base fluids and powerful extreme pressure (EP) additives, for use in industrial gear systems.  Lodexol FS Industrial Gear Oils are formulated to protect against wear, oxidation, foam, rust and corrosion.The synthetic base fluids used in this range have outstanding thermal stability ensuring that gear systems running at elevated temperatures have the

A range of gear oils, combining synthetic base fluids and powerful extreme pressure (EP) additives, for use in industrial gear systems. Lodexol FS Industrial Gear Oils are formulated to protect against wear, oxidation, foam, rust and corrosion.The synthetic base fluids used in this range have outstanding thermal stability ensuring that gear systems running at elevated temperatures have the correct

A range of gear oils, combining synthetic base fluids and powerful extreme pressure (EP) additives, for use in industrial gear systems. Lodexol FS Industrial Gear Oils are formulated to protect against wear, oxidation, foam, rust and corrosion.The synthetic base fluids used in this range have outstanding thermal stability ensuring that gear systems running at elevated temperatures have the correct

Terralus SB46 is a fully synthetic biodegradable hydraulic oil that may be used in environmentally sensitive locations such as agricultural land, forest floor, ground near water courses and reservoirs and construction sites. Terralus SB46 is based on synthetic esters to reduce gumming and high temperature oxidation, while improving low temperature fluidity. The formulation also contains approved performance additives, to reduce corrosion, wear and extend equipment life.

Liquisafe 46 is a high quality fire resistant hydraulic fluid blended with high and low molecular weight polyalkylene glycols in a stable water solution. The formulation includes special chemical additives that inhibit the formation of rust in the system, and provide anti-wear properties equal to that of mineral hydraulic oils. This product is compatible with all seals normally found in systems

A range of gear oils, combining synthetic base fluids and powerful extreme pressure (EP) additives, for use in industrial gear systems. Lodexol FS Industrial Gear Oils are formulated to protect against wear, oxidation, foam, rust and corrosion.

Magnaplex K982 an aluminium complex grease specifically formulated for use on open gears. This product has high load carrying and adhesive characteristics, which not only allow it to be used on gears with circumferential speeds in excess of 20m/sec., but also where exceptionally high loads and slow sliding speeds are encountered. It is free of bitumen, solvents and other components, which are hazardous

Supercut 8000 yields multi-metal compatibility, high tolerance to tramp oil and excellent surface finishes on many different alloys. The product has been specifically developed for use witnthe more difficult to machine alloys, whilst carefully selected corrosion inhibitor systems ensure stain free performance3 on steels, brasses and aerospace aluminium alloys.

SUPERCUT G has multi-metal compatibility, tolerance to tramp oil and bacterial degradation , helps reduce tool wear and gives excellent surface finishes on many different alloys.  Supercut G has been developed specifically for use with the more difficult to machine alloys and aluminium.  Carefully selected corrosion inhibitor systems ensure stain free performance on most metals including steels

Morris Lubricants Versimax® HD16 5W-30 has been developed for use in diesel engines fitted with exhaust gas re-circulation (EGR), selective catalytic reduction (SCR – Adblue) NOx reduction systems, diesel oxidation catalysts (DOC) and diesel particulate filters (DPF).

Lodexol SS 80W-140 has extremely good cold start fluidity, ensuring fast circulation around gear systems even when the oil is cold. Additionally, Lodexol SS 80W-140 has exceptional high temperature stability, ensuring maximum gear set protection even under the most arduous operating conditions

Supergrind SW is a fully synthetic water-mix grinding fluid that forms a true solution when diluted with water. Supergrind SW is formulated to have a very low foaming tendency, even when used with soft water. 

Versimax HD11 5W-30 is a top tier heavy duty diesel specific engine oil that has been designed to meet the necessary chemical limits required to maintain the efficiency of exhaust aftertreatment devices

Supergrind Plus is a fully synthetic grinding fluid offering exceptional performance and extended sump life in most grinding operations. It is formulated using the latest technology and offers excellent corrosion protection, stable solutions, low foaming tendency, excellent fines separation and resistance to degradation by bacteria or fungi. The synthetic formulation also alleviates &ldquowheel glazing

Morris Lubricants Versimax HD18 5W-20 maximises fuel efficiency potential by producing a thin strong oil film whilst under load, which in turn reduces energy losses and CO2 output.

Developed specifically for steam engines operating on the national rail network where true superheat conditions are experienced on long hauls

Steam Car Compound 1000 Cylinder Oil is for use in most Locomotives and Stationary engines working with either saturated or superheated steam.

Terralus BVG Hydraulic Oils are a range of readily biodegradable hydraulic oils manufactured to meet the requirements of hydraulic systems in industrial, horticultural and earth moving equipment. This range is mineral oil free and has been specially developed to meet concern over the inevitable spills, leakages and total system losses that frequently occur from burst hoses on hard worked hydraulic

Through its exceptional balance of cooling and lubricating properties, it has the outstanding ability to produce ultra-fine surface finishes. The product may be used on all metal types with the exception of hard metal carbides, and is especially recommended for non-metals, composites and glasses.Supergrind Ultra is ideal for surface grinding and roll grinding and may be used for ultra high speed machining

This range is mineral oil free and has been specially developed to meet concern over the inevitable spills, leakages and total system losses that frequently occur from burst hoses on hard worked hydraulic equipment. This is particularly important if hydraulic equipment is working where soil or water contamination is a possibility. In addition to the problem of mineral oil pollution, there is now evidence

This range is mineral oil free and has been specially developed to meet concern over the inevitable spills, leakages and total system losses that frequently occur from burst hoses on hard worked hydraulic equipment. This is particularly important if hydraulic equipment is working where soil or water contamination is a possibility. In addition to the problem of mineral oil pollution, there is now evidence

Morris Cora B is suited to general machining operations on ferrous metals up to medium tensile steels and non-ferrous metals. The additive system ensures improved surface finish and tool life whilst remaining non-staining to copper and its alloys.

A solvent deposited, medium term rust preventative with water displacing properties providing a thin grease film when dry. Ankor C has good operator acceptability due to its low odour and ease of application by dipping, brushing or spraying