Loading...

Supercut 1000 (Unison Edge) Soluble Cutting Fluid

CODE: UNI

£20.26 (£24.31 inc tax)
In stock
Morris Lubricants / Water Soluble / Cutting Oil / 5 Ltr, 25 Ltr
When mixed with water Supercut 1000 forms a stable milky emulsion which can be used in most conventional machining operations. Unison Edgeplus is a cost effective product that exhibits excellent corrosion protection and exceptional service life for a conventional fluid of this type.

Triad 32 Hydraulic Oil

CODE: TRI

£17.33 (£20.80 inc tax)
In stock
Morris Lubricants / Hydraulic Oil / 25 Ltr, 5 Ltr
Premium hydraulic oil - ISO VG 32 with excellent anti-wear properties and corrosion inhibition. Good anti-foam plus rapid air release prevents sponginess, ensuring a positive hydraulic response. Ideal for use in mobile plant.

Carb Cleaner Aerosol

CODE: CAR

£5.17 (£6.20 inc tax)
In stock
Morris Lubricants / 400 ml
It can also be used with great effect to restore tune to carburettors in situ, or with only partial dismantling, if these have become blocked stuck or dirty. This makes CARB CLEANER a vital part of any pit crew kit. When sprayed in to the air intake this product cleans all parts of the inlet system, carburettors, port areas and inlet valves. In these areas it is most effective in keeping vital parts

Cora B Neat Cutting Oil

CODE: COB

£19.61 (£23.53 inc tax)
In stock
Morris Lubricants / Low Odour / Cutting Oil / 25 Ltr, 5 Ltr
It is suited to general machining operations on ferrous metals up to medium tensile steels and non-ferrous metals. The additive system ensures improved surface finish and tool life whilst remaining non-staining to copper and its alloys. Careful selection of base oils and additives ensure the product is pale in colour, low in odour and low viscosity in use.

MCT Compound

CODE: MCT

£9.04 (£10.85 inc tax)
In stock
Morris Lubricants / Extreme Pressure / Cutting Oil / 500 gm
MCT Lubricants are advanced extreme pressure metal cutting products for all hand applied machining operations, in particular, blind hole tapping and drilling. Extreme pressure properties make them highly effective on difficult materials and work hardening alloys such as stainless, high tensile steels and nimonics.  MCT Lubricants are available in liquid and compound forms to suit users&rsquo

Prima Hard Surface Conditioner Aerosol

CODE: PRI

£6.24 (£7.49 inc tax)
In stock
Morris Lubricants / 400 ml
It has been designed as a multipurpose product that cleans, restores and protects surfaces at the same time. It is easy to use and gives a like new finish to all kinds of surfaces including vinyl, plastic, wood, chrome, stainless steel, and wood. Prima Silicone Spray is recommended for all valeting jobs on dashboards, bumpers, vinyl seats and roofs, door trims, grills, and motorcycles. (Not motorcycle

Cora R Neat Cutting Oil

CODE: COR

£23.85 (£28.62 inc tax)
In stock
Morris Lubricants / Extreme Pressure / Cutting Oil / 25 Ltr, 5 Ltr
Cora R is a low fume, heavy duty, extreme pressure neat oil specifically developed for use in rotary broaching applications. Its high levels of lubricity also make it suitable for a number of applications involving non-ferrous alloys, particularly aluminium alloys. Extreme pressure additives help reduce tool wear and improve surface finishes. Specially selected base oils and additive systems ensure

Prise Anti-Seize Compound Aerosol

CODE: PSE

£6.44 (£7.73 inc tax)
In stock
Morris Lubricants / Anti-Seize, Water Resistant / Chain Lubricant / 400 ml
Made from solvent refined oil, Bentonite thickener and fine copper powder. The product is highly recommended as a thread lubricant on the external parts of all racing motorcycles, where rapid and trouble free disassembly by pit crews is a competitive essential. The special anti-seize properties enable this grease to work even if the joints become so compressed that most of the compound is squeezed

Croma Chain Lubricant Aerosol

CODE: CRO 400

£6.44 (£7.73 inc tax)
In stock
Morris Lubricants / Chain Lubricant / 400 ml
This product is initially a thin flowing lubricant which when sprayed, searches and penetrates into the chain links and rollers. Within a few minutes the solvent carrier &lsquoflashes off &lsquo and the product thickens and provides a strong, cushioning and lubricating, grease like coating on all parts. This coating has powerful anti-fling properties and is not displaced by the fast movement of the

Solvent Cleaner Aerosol

CODE: SOL

£4.94 (£5.93 inc tax)
In stock
Morris Lubricants / Chlorine Free / Degrease Fluid / 400 ml
Solvent Cleaner is free from chlorinated and other ozone depleting solvents and is provided in aerosol form to provide an easy means of applying to surfaces, the powerful jet allowing easy purging of blind holes and crevices. After degreasing, the solvent evaporates rapidly leaving components chemically clean and free from oily and corrosive residues. The low temperature resulting from rapid evaporation

Pavan Degreaser Aerosol

CODE: PAV

£5.13 (£6.16 inc tax)
In stock
Morris Lubricants / Degrease Fluid / 400 ml
Manufactured from a highly refined hydrocarbon solvent and a non-ionic surfactant. It was originally developed for rapid de-waxing of car bodies. The formulation acts by dissolving the wax or oil content and allowing them to be emulsified so that surfaces can then be washed clean with water. It has an extremely effective cleaning action on all surfaces even at low ambient temperature. Pavan Degreaser

Lydian Degreaser Fluid

CODE: LYD

£17.87 (£21.44 inc tax)
In stock
Morris Lubricants / Degrease Fluid / 5 Ltr, 25 Ltr
Lydian Degreaser is a ready for use, blue coloured emulsifiable fluid, manufactured from a mixture of hydrocarbon solvents and a non-ionic detergent.  This powerful degreasing formulation acts by splitting the bond between solid dirt and oily matter, so that the surface can then be washed clean with water.   It has an extremely effective cleaning action on all surfaces, even at low ambient

MD4 Penetrating Fluid Aerosol

CODE: MDF

£5.58 (£6.70 inc tax)
In stock
Morris Lubricants / Anti-Seize / Corrosion Protective / 400 ml
When applied to wet parts the chemistry of MD-4 has a powerful attraction to the underlying surfaces and this completely displaces traces of water. Therefore this product is particularly useful as an engine damp start. If the aerosol pack is used, a short spray on to the affected parts will displace any wetness and prevent voltage breakdown, allowing the engine to be started again normally. MD-4 is

MCT Liquid

CODE: MCL

£11.22 (£13.46 inc tax)
In stock
Morris Lubricants / Extreme Pressure / Cutting Oil / 5 Ltr, 500 ml
MCT Lubricants are advanced extreme pressure metal cutting products for all hand applied machining operations, in particular, blind hole tapping and drilling. Extreme pressure properties make them highly effective on difficult materials and work hardening alloys such as stainless, high tensile steels and nimonics.  MCT Lubricants are available in liquid and compound forms to suit users&rsquo
 
premier lubricants online is Upfront