Metal Working Fluids

£180.15 (£216.18 inc VAT)
Corrosion Preventative, 25 Ltr

A solvent deposited, medium term rust preventative with water displacing properties providing a thin grease film when dry. Ankor C has good operator acceptability due to its low odour and ease of application by dipping, brushing or spraying

In stock

£172.48 (£206.98 inc VAT)
Corrosion Protective, 25 Ltr

This product has a very low surface tension and viscosity and therefore spreads rapidly, penetrating into all hard to reach parts and covering all surfaces however irregular. It dried to leave a continuous protective coating of viscous petroleum products and additives that have powerful rust preventative properties. This product is particularly useful where the metal parts to be treated

In stock

£142.83 (£171.40 inc VAT)
Water Resistant, Corrosion Protective, 25 Ltr

Ankor RR is a general purpose de-watering fluid and thin film solvent deposited rust preventative. Ankor RR has a low viscosity and surface tension to aid the penetration and spreading ability into the less accessible parts whilst imparting the required de-watering action. Once dry Ankor RR leaves a soft oily thin film that will impart corrosion protection for a variety of materials under

In stock

£165.68 (£198.82 inc VAT)
Corrosion Protective, 25 Ltr

Ankor ST is a solvent deposited, short to medium term rust preventative, for use on components that are exposed for relatively short time periods or in less harsh environments. This product has low surface tension and viscosity and therefore spreads rapidly, penetrating into less accessible areas and covering all surfaces however irregular. It dries to leave a continuous protective coating

In stock

£17.73 (£21.28 inc VAT)
Extreme Pressure, 500 ml
MCT Lubricants are advanced extreme pressure metal cutting products for all hand applied machining operations, in particular, blind hole tapping and drilling. Extreme pressure properties make them highly effective on difficult materials and work hardening alloys such as stainless, high tensile steels and nimonics.  MCT Lubricants are available in liquid and compound forms to suit users&rsquo
In stock
 

£11.33 (£13.60 inc VAT)
Free from MCCPs, High Lubricity, Extreme Pressure, Cutting Compound, 500 gm

TDR Paste: A waxy paste usually applied by dipping the tool into the product.  

In stock

£53.94 (£64.73 inc VAT)
High Lubricity, Extreme Pressure, Cutting Oil, 5 Ltr

A viscous liquid usually applied by the use of squeeze or dripping bottle.

In stock

£47.95 (£57.54 inc VAT)
5 Ltr

A solvent deposited, general purpose medium to long term rust preventative with water displacing properties. On drying, a thin grease film provides long term indoor protection or medium to long term outdoor protection dependent upon storage conditions. Application, preferably by dipping but spraying or brushing may also be employed. Removal is by hydrocarbon solvent or by use of a suitable alkaline

In stock

£318.06 (£381.67 inc VAT)
25 Ltr, Vegetable Oil, AOL 025 - 25 Ltr

Terralus AIR-O-LUBE is a pale amber liquid derived from natural vegetable oils blended with performance enhancing additives. It has low toxicity and is readily biodegradable. Terralus AIR-O-LUBE is a specially balanced formulation for use through metered mist air equipment to ensure economical lubricant utilisation and eliminates fluid loss associated with flood coolants. It has a high affinity to metal surfaces giving superior adhesion and on contact, the airborne droplets cling to minimise back scatter.

In stock
 

£57.35 (£68.82 inc VAT)
5 Ltr, 25 Ltr, PBIO 005 - 5 Ltr

A highly effective flushing additive, designed to be added to old cutting fluid emulsions to assist cleaning of system prior to changing.    

In stock
 

£59.75 (£71.70 inc VAT)
Grinding Oil, Excellent resistance to bacterial and fungal infection, Non Foaming, Nitrite free, Bio-stable, Mineral Oil Free, 5 Ltr, 25 Ltr, PGSOL5 005 - 5 Ltr

A nitrite-free, mineral oil free grinding fluid incorporating the latest biostable technology.

In stock
 

£35.91 (£43.09 inc VAT)
5 Ltr, 25 Ltr, PSOL 2B 005 - 5 Ltr

Forms a good stable milky emulsion, even in hard waters up to 400 ppm Ca CO3 hardness. Good inhibition against corrosion of a wide range of ferrous metals, giving protection to workpiece and machine parts. Also good resistance to contact corrosion, so workpieces may be stacked without staining taking place. Low staining potential on many non-ferrous metals including copper and its alloys

In stock
 

£159.50 (£191.40 inc VAT)
Contains anti-oxidant and anti-corrosion additives, Based on severely refined mineral oil for optimum health and safety, Suitable for wide range of metals, Mineral, Cutting Oil, 25 Ltr

A light coloured medium viscosity neat cutting oil, designed for general purpose light duty machining operations.

In stock

£175.66 (£210.79 inc VAT)
Grinding Oil, Amine Free, 25 Ltr, GSOL495P025 - 25 Litre

Premier Lubricants Grindsol 495 Plus is a completely Amine free grinding fluid that forms a clear fluorescent solution.

In stock
 

£67.82 (£81.38 inc VAT)
Fungicides, Bactericides , Cleaning Fluid, 5 Ltr
SYSTEM OVERHAUL:  Use SUPERCLEAN KD150 SYSTEM CLEANER which is a dark brown viscous liquid with a characteristic odour at levels of 2-3%.  It should be used where a machine tool has become heavily contaminated with sticky tramp oils and/or bacterial slimes or mould growths in sumps, pumps and pipe-work, necessitating a more drastic remedy.
In stock

£66.34 (£79.61 inc VAT)
Vegetable Oil, Biodegradable, Cutting Oil, 5 Ltr, 25 Ltr, AML 005 - 5 Ltr

A fully biodegradeable product developed specifically for metal cutting applications where the lubricant is applied by air-misting.

In stock