Brand Selector

Workshop ProTraffic Film Remover is a unique combination of surface active agents, sequestrants and alkaline builders with the following features. Effective at higher dilutions. Easily and gently removes road dirt and grime. Ideal for hot or cold pressure wash machines. Effective in hard and soft waters. Contains rinse off additive. Biodegradable. Dyed blue for product identification. Safe on paint work, metal surfaces, glass and rubber. Does not contain ingredients which accelerate metal corrosion.

K3 is a premium quality, water resistant grease for use in industrial and marine applications where the presence of water and humid atmospheres can effect lubricating performance and be detrimental to the protection of parts from corrosion. K3 is further enhanced with a special additive which provides additional protection and lubrication in areas where excessive levels of water are prevalent such

Morris Lubricants Marine SAE 10W-40 is a high quality, multigrade engine oil designed for use in canal boats

Morris Duplex CDX 15W/40 is a mixed fleet lubricant, incorporating high quality minerals oils and performance additives, suitable for use in a wide variety of diesel and petrol engine designs, including turbocharged versions. This grade will protect engine components from rust and corrosion and provide high levels of engine cleanliness, even in extended oil drain applications.

Compound Steam Cylinder Oils 460, are for use in most Locomotives and Stationary engines working with either saturated or superheated steam.

Morris Multivis MLR 10W-50 is recommended for all turbo-charged and naturally aspirated petrol and diesel engines, for ordinary road use and also for car racing, endurance events, rallying and all other types of motor sport.

Steam Car Compound 1000 Cylinder Oil is for use in most Locomotives and Stationary engines working with either saturated or superheated steam.

Groundforce Croma 30 Cutter Bar Oil is designed to meet all lumber industry, forestry, woodyard and estate management requirements. Provides excellent corrosion protection and improved chain performance in a wide range of climatic conditions.
 

Workshop Pro Semi-synthetic Chain Lubricant is a specially formulated aerosol designed for the protection of chains used in a variety of applications.

This oil is for use in most Locomotives and Stationary engines working with either saturated or superheated steam. It is produced from special cylinder stock treated with fatty compounds and particularly Tallow to provide superior lubrication even if wet conditions are encountered. The fatty compounds form emulsions which spread the oil on the internal surfaces, providing a strong lubricating film

The Terrain CT range is formulated with high quality mineral oils and additives designed to provide the correct frictional characteristics required by Caterpillar in transmission and hydraulic systems. The additive system also gives this oil improved temperature performance, superior resistance to oxidation, rust, corrosion and improved anti-foam properties. In addition these grades have excellent

Morris Multivis ADT C3 5W-40 is a mid-SAPS synthetic technology engine oil formulated to meet the

demands and fuel efficiency expectations of the latest petrol and diesel engines, where a low
viscosity oil is required.  

The Terrain CT range is formulated with high quality mineral oils and additives designed to provide the correct frictional characteristics required by Caterpillar in transmission and hydraulic systems. The additive system also gives this oil improved temperature performance, superior resistance to oxidation, rust, corrosion and improved anti-foam properties. In addition these grades have excellent

The Terrain CT range is formulated with high quality mineral oils and additives designed to provide the correct frictional characteristics required by Caterpillar in transmission and hydraulic systems. The additive system also gives this oil improved temperature performance, superior resistance to oxidation, rust, corrosion and improved anti-foam properties. In addition these grades have excellent

Morris Lubricants - Multivis ADT C2 5W-30 is a mid-SAPS synthetic based multigrade engine oil formulated to meet the superior performance and fuel efficiency requirements of engines requiring low viscosity oils for gasoline and diesel engine applications.

Terralus CBO oil is specially formulated to overcome the environmental concern, of long term potentially harmful ecological effects of mineral based oils in total loss systems, particularly in the agricultural, forestry, horticultural and water industries. The biodegradable products used in the formulation: -&bull Reduce wear on cutter bar chain and sprockets&bull Reduce build up of foam&bull Provide

Morris Race Light Gear Oil is the first choice for all high performance road and competition machines where a 10W-40 grade is specified.

Morris EP80W-90 Gear Oil is designed for use in a wide variety of applications, including: manual gearboxes, transaxles, transfer boxes, PTO boxes, reduction hubs/gear, differentials (including hypoid designs), axles, planetary and epicyclic drives, shaft drives, sprocket drives, track drives, track rollers, track idlers, hoist/winch gearboxes, steering boxes, oil lubricated bearings, swivel housings, swing gearboxes, slewing rings/gears, etc.

Morris EP 85W-140 Gear Oil is designed for use in a wide variety of applications, including: manual gearboxes, transaxles, transfer boxes, PTO boxes, reduction hubs/gear, differentials (including hypoid designs), axles, planetary and epicyclic drives, shaft drives, sprocket drives, track drives, track rollers, track idlers, hoist/winch gearboxes, steering boxes, oil lubricated bearings, swivel housings, swing gearboxes, slewing rings/gears, etc.

Morris Lubricants - Golden Film Flushing Oil is a combination of highly refined light mineral oils and detergent/dispersant additives to enhance removal of sludge and lacquers. Flushing oil can be used where a system’s history is unknown or the service fill lubricant may have been used beyond its oil drain interval. This product can also be used if the service fill lubricant has to be drained because of a contamination

Fully Synthetic Chain Lube - protects chains from wear and corrosion. Initialy a thin free-flowing lubricant when sprayed it penetrates into vital inner pins and bushes of the chain links where it cushions against shock loading.

Race 4 TT 10W-40 is recommended for all turbo-charged and naturally aspirated racing engines and super bikes or where the manufacturer specifies an oil of this type and specification.

Morris Bearing Oils are recommended for all total loss applications where the special properties of these oils are needed

Morris Bearing Oils are recommended for all total loss applications where the special properties of these oils are needed.

Manufactured from a Calcium soap base and highly refined mineral oil, with added graphite to provide boundary lubrication and protection against seizure in conditions when ordinary greases would fail. Also included in this grease are additives to prevent corrosion, rust and oxidation. Additionally, this grease shows excellent resistance to severe mechanical working.

Golden Film Classic Motor Oils are a specialist range of high quality, low detergent/dispersant monograde lubricants. These oils are suitable for use in naturally aspirated four stroke petrol and diesel engines and classic gearbox designs.

Golden Film Classic Motor Oils are a specialist range of high quality, low detergent/dispersant monograde & multi-grade lubricants. These oils are suitable for use in naturally aspirated four stroke petrol and diesel engines and classic gearbox designs.

Golden Film SAE 20W-50 Classic Oil is specialist high quality, low detergent/dispersant multigrade lubricant.  This oil is suitable for use in naturally aspirated four stroke petrol and diesel engines..

Golden Film Classic Oils are a specialist range of high quality, low detergent/dispersant monograde lubricants. These oils are suitable for use in naturally aspirated four stroke petrol and diesel engines and classic gearbox designs.

Groundforce SAE 10W-40 is designed to cope with the difficult conditions found in four stroke diesel and petrol engines fitted to horticultural, garden machinery and stationary equipment where multigrade oils are recommended. The oil is blended from solvent refined base stocks and performance additives to control vanish, soot dispersancy, low temperature sludge, oxidation, rust and corrosion. Groundforce SAE 10W-40 is recommended for all year use.

Groundforce 2T has been developed to meet the requirements of small high revving air cooled 2-stroke engines in horticultural and agricultural equipment. The lubricating film is strong enough to prevent engine lock up in moments of temporary overheating and provides maximum film strength and anti-wear performance. Reduced smoke and clean burning characteristics mean that deposit formation in the ports

Groundforce 2HSS is a top quality synthetic boosted 2-stroke oil, utilising the latest performance additive technology, for protection and performance.

High viscosity index hydraulic oil, formulated from high quality minerals oils and the latest anti-wear technology. Ideal for hydraulic systems subjected to the very extremes of operating conditions and temperatures, from frozen food stores (-20oC) to industrial hydraulic systems at elevated temperatures and off highway equipment.Recommended for both Industrial and off highway hydraulic systems, where

Agrimax®
JDF is recommended for use in a variety of applications where an oil of this quality is
specified. Applications include: powershift transmissions, mechanical transmissions,
transaxle/hydraulic systems, hydrostatic drives, torque converters, final drives, reduction hubs,
power steering, steering boxes, PTO boxes, brake/clutch systems, hydraulic units, etc.

These multipurpose Lithium based greases are prepared from highly refined mineral oil, with the addition of powerful sulphur phosphorus extreme pressure additives. This range of greases has exceptional mechanical stability, maintaining their consistency even after severe working. They are resistant to water washing, protect against rust and are non-corrosive to non-ferrous bearing metals and steel

This range of semi fluid, soft Lithium based greases have been specially designed for use in centralised lubrication systems. They are easily pumped, have superb oxidation resistance, exceptional mechanical stability, good water resistance and rust protection and can be used over a wide range of operating temperatures. They conform to all leading bearing manufacturers specifications for general purpose

These multipurpose Lithium based greases are prepared from highly refined mineral oil, with the addition of powerful sulphur phosphorus extreme pressure additives. This range of greases has exceptional mechanical stability, maintaining their consistency even after severe working. They are resistant to water washing, protect against rust and are non-corrosive to non-ferrous bearing metals and steel

This Lithium grease is highly recommended for all automotive use where a multipurpose grease is required for wheel bearings and chassis lubrication. This grease is particularly suited for the lubrication of construction and mining equipment such as bulldozers, scrapers, loading shovel and all off highway trucks where greased components are subjected to continuous heavy loads and shock loads.

K2 EP Lithium Complex Red Grease is a mineral oil based lithium complex soap thickened grease, containing performance additives. The additives provide extreme pressure (EP), oxidation, rust and corrosion protection, ensuring effective lubrication is achieved even under the most severe conditions. It has excellent sealing properties which help protect bearings against corrosive atmospheres and the ingress

Magnaplex K982 an aluminium complex grease specifically formulated for use on open gears. This product has high load carrying and adhesive characteristics, which not only allow it to be used on gears with circumferential speeds in excess of 20m/sec., but also where exceptionally high loads and slow sliding speeds are encountered. It is free of bitumen, solvents and other components, which are hazardous