Brand Selector

The use of Morris Golden Film running-in oil during the running in period helps to remove the machining glaze from cylinder bores, assists the formation of essential oil retaining surfaces, and therefore prevents the possibility of bore polishing.

A lead free anti seize compound, made from high quality mineral oils, bentonite (clay) thickener and fine copper powder. Anti-seize properties enable this grease to work even if the joints become so compressed that most of the compound is squeezed out, or excessive temperature flashes off the oily part of the compound. A fine film of copper particles always remain in joints or threads to prevent seizure

Specially formulated ‘2000 hour’ fluid developed to meet the requirements of hydrovane compressors and other similar vane compressors, ensuring long, trouble-free compressor life, wherever a fluid of this viscosity is recommended by the manufacturer.

Astra Slideway Lubricants have been specifically developed for the lubrication of machine tool slideways and tables. They have been formulated from high quality mineral oil, performance additives and incorporate a tackifier to ensure that the lubricant adheres to the moving parts at all times. The performance additives provide outstanding resistance to oxidation, corrosion and wear and eliminate stick

The Alto range of machine oils contain anti-rust and antioxidant additives (R&O) that are blended into high quality mineral oils that possess good natural lubricating properties enhanced by modern refining techniques. They have good viscosity indices and separate from water cleanly and quickly.

Astra Slideway Lubricants have been specifically developed for the lubrication of machine tool slideways and tables. They have been formulated from high quality mineral oil, performance additives and incorporate a tackifier to ensure that the lubricant adheres to the moving parts at all times. The performance additives provide outstanding resistance to oxidation, corrosion and wear and eliminate stick

Ankor ST is a solvent deposited, short to medium term rust preventative, for use on components that are exposed for relatively short time periods or in less harsh environments. This product has low surface tension and viscosity and therefore spreads rapidly, penetrating into less accessible areas and covering all surfaces however irregular. It dries to leave a continuous protective coating

Morris Liquimatic Super ATF is an automatic transmission fluid blended from high quality mineral oil, synthetic base fluids and a balanced additive system. This grade has superior performance in terms of frictional characteristics, seal compatibility, oxidation stability, low temperature fluidity and resistance to high temperatures encountered during severe operating conditions.

The Alto range of machine oils contain anti-rust and antioxidant additives (R&O) that are blended into high quality mineral oils that possess good natural lubricating properties enhanced by modern refining techniques. They have good viscosity indices and separate from water cleanly and quickly.

These products contain additives to prevent rust and corrosion that can occur in systems that are vulnerable to condensation between operations.  Anti-foam additives are also incorporated to encourage the release of entrained air and to collapse foam. This is vitally important as air bubbles or foam can reduce the effectiveness of the heat transfer system.Atonal Heat Transfer Oils also contain

Astra Slideway Lubricants have been specifically developed for the lubrication of machine tool slideways and tables. They have been formulated from high quality mineral oil, performance additives and incorporate a tackifier to ensure that the lubricant adheres to the moving parts at all times. The performance additives provide outstanding resistance to oxidation, corrosion and wear and eliminate stick

Morris Workshop Pro Premium Barrier Cream prevents noxious substances coming into contact with the skin and stops soiling from penetrating deep into the skin, as well as reducing skin irritation and minimising allergy and sensitivity potential.

Morris Brake Fluid is made from high molecular weight polyalkylene glycol ethers and polyalkylene glycol ether borates, to give a high boiling point fluid of DOT 4 quality.

This range is mineral oil free and has been specially developed to meet concern over the inevitable spills, leakages and total system losses that frequently occur from burst hoses on hard worked hydraulic equipment. This is particularly important if hydraulic equipment is working where soil or water contamination is a possibility. In addition to the problem of mineral oil pollution, there is now evidence

This range is mineral oil free and has been specially developed to meet concern over the inevitable spills, leakages and total system losses that frequently occur from burst hoses on hard worked hydraulic equipment. This is particularly important if hydraulic equipment is working where soil or water contamination is a possibility. In addition to the problem of mineral oil pollution, there is now evidence

Terralus BVG Hydraulic Oils are a range of readily biodegradable hydraulic oils manufactured to meet the requirements of hydraulic systems in industrial, horticultural and earth moving equipment. This range is mineral oil free and has been specially developed to meet concern over the inevitable spills, leakages and total system losses that frequently occur from burst hoses on hard worked hydraulic