Brand Selector

When applied to wet parts the chemistry of MD-4 has a powerful attraction to the underlying surfaces and this completely displaces traces of water. Therefore this product is particularly useful as an engine damp start. If the aerosol pack is used, a short spray on to the affected parts will displace any wetness and prevent voltage breakdown, allowing the engine to be started again normally. MD-4 is

Multivis ADT C3 5W-30 is a mid SAPS synthetic multigrade engine oil specially formulated to meet the superior performance and fuel efficiency requirements of modern engines requiring low viscosity oils.

Multivis CST HP 5W-40 is a fully synthetic engine oil developed directly from motor racing technology and formulated for use in the latest passenger car and van engine designs. It has proved to be far superior to conventional oils and provides the following advantages:

Morris Multivis CST SS 10W-40 is a semi-synthetic engine oil manufactured from advanced Group II and Group III base fluids and the latest additive technology.

Golden Film SAE 15W-50 Classic Motorsport oil is manufactured from high quality mineral oils and an advanced additive system and is designed primarily for petrol engines.

K15is a black residual lubricant, which has been compounded with fatty agents to give extra oiliness and water resistance. This tough lubricant has tremendous film strength and adhesion to metal surfaces. It acts as a cushion between moving parts, providing outstanding protection against wear, rust, corrosion, and quietening of noisy gears. This lubricant is not dislodged from metal parts by water

A fully biodegradeable product developed specifically for metal cutting applications where the lubricant is applied by air-misting.

Workshop Pro Solvent Degreaser is a ready for use, pink coloured emulsifiable fluid, manufactured from a highly refined hydrocarbon solvent and a non-ionic surfactant. It was originally developed for rapid de-waxing of car bodies. 

Premium Blue lithium / calcium base grease is an extremely sophisticated lithium / calcium base grease which incorporates modern polymer technology. This advanced grease has a high level of water tolerance, mechanical stability and adherence. has exceptional load carrying ability and will cope with constant high levels of loads and shock loading. Its wide application temperature range makes

A highly effective flushing additive, designed to be added to old cutting fluid emulsions to assist cleaning of system prior to changing.    

A high performance neat cutting oil specifically developed for use on severe applications.

A range of fully synthetic gear oils, manufactured from polyalkylene glycol (PAG) fluids and specialised extreme pressure (EP) additives, to provide outstanding protection at all temperatures to industrial gear systems. Unlike conventional gear oils PAG fluids maintain an effective lubricating film over a wide operating temperature range, from artic conditions to high thermal loadings. PAG Fluids

A translucent green, biostable, micro-emulsion metalworking fluid that offers excellent workpiece visibility and extended sump life. It is non-staining to ferrous and non-ferrous materials which enables it to be used on a wide variety of metals from medium tensile and high carbon steels to cuprous alloys and cast iron. It is particularly suited to modern CNC machning centres. Premiercut GP is ideal

A nitrite-free, mineral oil free grinding fluid incorporating the latest biostable technology.

A range of fully synthetic gear oils, manufactured from polyalkylene glycol (PAG) fluids and specialised extreme pressure (EP) additives, to provide outstanding protection at all temperatures to industrial gear systems. Unlike conventional gear oils PAG fluids maintain an effective lubricating film over a wide operating temperature range, from artic conditions to high thermal loadings. PAG Fluids

A premium quality Hydraulic oil formulated from Group I mineral base oils with additives to provide excellent protection against oxidation, corrosion, wear and foaming. This hydraulic oil is blended to ISO 32 viscosity grade requirements and is suitable for use in a wide range of mobile and static hydraulic equipment...

Race Performance 2T is recommended for all two stroke engines, whether premix or injector, where an oil of this specification is demanded. Check the manufacturer’s handbook for mixing method and dilution ratios. Ideal for engines used for high mileage or stop/start duties, where reliability is paramount, i.e. messenger fleets.

Workshop Pro Surface Conditioner is a special blend of silicone, solvents and cleaners. It has been designed as a multipurpose product that cleans, restores and protects surfaces at the same time.

TDR Paste: A waxy paste usually applied by dipping the tool into the product.  

A viscous liquid usually applied by the use of squeeze or dripping bottle.

Workshop PRO Anti-Seize is a lead and CFC free compound, made from solvent refined oil, Bentonite thickener and fine copper powder. The product is highly recommended as a thread lubricant on the external parts of all racing motorcycles, where rapid and trouble free disassembly by pit crews is a competitive essential.

Premier slideway 68 is a premium quality machine tool slideway oil formulated to meet the requirements of the latest machine tool slideways, tables, carriages, guides and general machine operations including hydraulics and gear boxes. Slideway oils are formulated from high viscosity index solvent refined mineral base oils fortified with additives to prevent oxidation, corrosion and wear, and deliver excellent lubrication

Forms a good stable milky emulsion, even in hard waters up to 400 ppm Ca CO3 hardness. Good inhibition against corrosion of a wide range of ferrous metals, giving protection to workpiece and machine parts. Also good resistance to contact corrosion, so workpieces may be stacked without staining taking place. Low staining potential on many non-ferrous metals including copper and its alloys

A biostable, semi-synthetic cutting fluid designed for use in applications where extra lubricity and extreme pressure properties are required, such as: Sawing of aluminium and aerospace alloys. Broaching. Screw cutting of alloy steels. Deep hole boring. Spray applied gun drilling Forming.

This is a low viscosity water white mineral oil specially prepared as a reference fluid for diesel injection testing equipment. A fluid such as Seria Fuel Pump Test Oil is produced to very close specification limits, which are essential for accurate and consistent results in test equipment. It is not possible to perform these testing procedures with diesel fuels that can vary considerably in viscosity

Ring Free XHD monogrades are high quality engine oils particularly recommended for haulage, plant contractors and certain mixed fleet operations. They are manufactured from high quality mineral oils and provide protection against wear, rust and corrosion. The technology used in these oils gives excellent results in 4-stroke turbo-charged and naturally aspirated indirect injected diesel engines and

Versimax HD3 20W-50 has high levels of detergency /dispersancy to reduce combustion chamber deposits and ring sticking, as well as preventing excessive soot thickening. This grade will protect from wear, rust and corrosion.

K76 is a premium quality biodegradable bentone thickened automotive grease designed to be fully compatible with all types of natural and synthetic rubber.  When in contact with rubber components, this grease will not cause cracking or undue swelling. K76 acts as an excellent lubricant between rubber components and steel or other metals. Due to the vegetable base oil the grease is resistant to

Versimax HD8 10W/40 is a low SAPS (Sulphated Ash, Phosphorus and Sulphur) synthetic heavy duty diesel specific engine oil. Manufactured from synthetic base fluids this product contains an advanced additive package formulated to provide protection when operating in very severe conditions with extended drain intervals. Versimax HD8 10W/40 meets the heavy duty truck requirements for Low Emission

Versimax HD4 15W-40 is a highly versatile heavy duty engine oil that can be used to rationalise inventories, due to its extensive performance profile.

Ring Free XHD monogrades are high quality engine oils particularly recommended for haulage, plant contractors and certain mixed fleet operations. They are manufactured from high quality mineral oils and provide protection against wear, rust and corrosion. The technology used in these oils gives excellent results in 4-stroke turbo-charged and naturally aspirated indirect injected diesel engines and

Groundforce SAE 30 is a low ash lubricant designed for use in older horticultural equipment powered by petrol and diesel engines where monograde oils are recommended. The oil is blended from solvent refined base stocks and performance additives to control vanish, soot, dispersancy, low temperature sludge, oxidation, rust and corrosion. Groundforce SAE 30 is particularly suitable where machinery has

Hard metals such as tungsten carbide contain significant amounts of Cobalt in their make-up. It has been shown* that if released into the work place, Cobalt poses a health hazard to machine operators. If conventional synthetic grinding fluids are used to grind carbides, Cobalt is automatically released into the fluid and builds up to harmful levels. A specialist product is therefore required to prevent

S-3403 is a special synthetic chain lubricant specifically designed and manufactured for use in high temperatures and other adverse conditions where conventional lubricants would fail.  It is a blend of polyisobutylene, esters and performance enhancing additives that have excellent thermal stability at elevated temperatures.

Workshop PRO All Seasons Screen Wash is a specially formulated screen wash concentrate that is made for adding to water in vehicle washer bottles. It cuts through dirt and grime from roads and traffic leaving a clean and sparkling smear free windscreen. The special formulation helps wiper blades glide smoothly over the screen and eliminates annoying judder. Suitable for all year round use.

This oil has been manufactured for the special requirements of these engines using today’s technology and materials. The traditional technology used in this oil provides outstanding, resistance to rust, corrosion, wear and oxidation, even in the presence of water. This oil also has a high viscosity index, giving good flow rates to bearings and all moving parts at low start up temperatures, coupled

Fork Oils are made from selected high quality mineral oils and performance additives, ensuring compatibility with all seals and other fork components. High Viscosity Index ensures smooth predictable damping over a wide temperature range

This  semi fluid, soft Lithium based greases has been specially designed for use in centralised lubrication systems. It is easily pumped, has superb oxidation resistance, exceptional mechanical stability, good water resistance and rust protection and can be used over a wide range of operating temperatures.It conforms to all leading bearing manufacturers specifications for general purpose

Agrimax® Super Farm Universal has been designed to cover the majority of agricultural lubrication requirements, whilst maintaining a reduced inventory.

Fork Oils are made from selected high quality mineral oils and performance additives, ensuring compatibility with all seals and other fork components. High Viscosity Index ensures smooth predictable damping over a wide temperature range.

Astra Slideway Lubricants have been specifically developed for the lubrication of machine tool slideways and tables. They have been formulated from high quality mineral oil, performance additives and incorporate a tackifier to ensure that the lubricant adheres to the moving parts at all times. The performance additives provide outstanding resistance to oxidation, corrosion and wear and eliminate stick

Morris Supergrind MP is part of the new generation of grinding fluids which are nitrite, mineral oil,
sulphur, chlorine and phenol free, and having excellent resistance to attack by moulds and
bacteria, resulting in extended odour free sump life.  

Materials: Ferrous and non-ferrous, tool steels, engineering and ceramics.

A complex mixture of hydrocarbon and oxygenated solvents designed to clean and degrease all flat and irregular surfaces.

Race Super 4 10W-40 provides a level of overall protection that ensures efficient engine and gearbox operation, whether through the town, countryside or motorway. Ideal for commuters and for riders who take to the open roads at the weekend. 

Supergrind Plus is a fully synthetic grinding fluid offering exceptional performance and extended sump life in most grinding operations. It is formulated using the latest technology and offers excellent corrosion protection, stable solutions, low foaming tendency, excellent fines separation and resistance to degradation by bacteria or fungi. The synthetic formulation also alleviates wheel glazing

Servol 15W/40 is manufactured from high quality mineral oils and a high performance additive system. This grade is designed for use in petrol and diesel engines and their turbocharged versions.

Morris Servol 10W/40 is suitable for use in passenger cars, light commercial vehicles, horticultural equipment, etc., where a grade of this type and performance level is required.

Supergrind SW is a fully synthetic water-mix grinding fluid that forms a true solution when diluted with water. Supergrind SW is formulated to have a very low foaming tendency, even when used with soft water. 

Agrimax® STF60 is a multifunction fluid formulated with high quality base oils and specialised additives for use in the transmission and hydraulics of agricultural, plant and material handling equipment

Fork Oils are made from selected high quality mineral oils and performance additives, ensuring compatibility with all seals and other fork components. High Viscosity Index ensures smooth predictable damping over a wide temperature range.

Supercut 8000 Ester Fortified, semi-synthetic, micro emulsion for heavy duty machining applications on difficult and sensitive alloys. Multi-metal compatibility, high tolerance to tramp oil and excellent surface finishes on many different alloys.
Stain free performance on steels, brasses and aerospace grade aluminium alloys.

Morris Supercut G is an Ester fortified, semi-synthetic micro-emulsion cutting fluid

incorporating the latest in performance additive technology. Supercut G has a high oil
content & chlorine free extreme pressure additives to ensure a high degree of lubricity and excellent machining performance.
Supercut G has been developed specifically for use with the more difficult to machine alloys
and aluminium. It is, therefore, an excellent product for workshop rationalisation and is
particularly suited to modern CNC machining centres.

Morris Supergrind Ultra is a premium quality versatile fully synthetic clear grinding fluid that is

free from nitrites, phenols, sulphur and chlorinated additives. It is recommended for the following operations & materials. 

machining.
Materials: High carbon steel, stainless steel, non-ferrous alloys, non-metals composites and
glasses. 

Supercut 4000 is a semi-synthetic, micro-emulsion metalworking fluid, readily miscible

with most mains water to produce a translucent green emulsion that is suited to a wide
variety of applications, non-staining to ferrous and non-ferrous materials which enables it to be

used on a wide variety of alloys.

Morris Supercut 6000 excellent lubricity handles slow speed and high-pressure operations, whilst its superior level of Extreme Pressure additives permits the use of high-speed CNC machining of tough alloys

Tabor 95 is a high quality concrete mould oil specially designed for production of slabs, posts and pavings where precision steel moulds are used. The formulation of light mineral oil, reactive fats and lubricity agents, is free of both solvents and wool fats and therefore the finished product has a low odour and a light colour. This product has better operator acceptability than traditional mould

Tabor OK finds use in a variety of applications e.g. as a process oil, degreasing medium and as a dielectric fluid for spark erosion.  It is also suitable as a replacement for chlorinated solvents in certain applications and may be used as a lower odour, high flash point alternative to white spirit  where the evaporation rate is not critical.

Morris Agrimax® STOU 15W-30 is a universal product suitable for use in a wide variety of older
agricultural machines. It can also be used in hydrostatic transmissions on tractors, combine harvesters, where a universal type product is recommended by the manufacturer and where oil immersed or wet brakes may be fitted.

Premium hydraulic oils - ISO VG 46, with excellent anti-wear properties and corrosion inhibition. Good anti-foam plus rapid air release prevents sponginess, ensuring a positive hydraulic response. Ideal for use in mobile plant.

Premium hydraulic oil - ISO VG 32 with excellent anti-wear properties and corrosion inhibition. Good anti-foam plus rapid air release prevents sponginess, ensuring a positive hydraulic response. Ideal for use in mobile plant.

Premium hydraulic oils - ISO VG 68, excellent anti-wear properties and corrosion inhibition. Good anti-foam plus rapid air release prevents sponginess, ensuring a positive hydraulic response. Ideal for use in mobile plant.

Morris Liquimatic 33G is recommended for use in all Ford automatic transmissions where a M2C 33G qualified product has been specified. Other transmission applications include Borg Warner, ITL (JCB) and certain Land Rover units.