Brand Selector

When applied to wet parts the chemistry of MD-4 has a powerful attraction to the underlying surfaces and this completely displaces traces of water. Therefore this product is particularly useful as an engine damp start. If the aerosol pack is used, a short spray on to the affected parts will displace any wetness and prevent voltage breakdown, allowing the engine to be started again normally. MD-4 is

Multivis ADT C3 5W-30 is a mid SAPS synthetic multigrade engine oil specially formulated to meet the superior performance and fuel efficiency requirements of modern engines requiring low viscosity oils.

Multivis CST HP 5W-40 is a fully synthetic engine oil developed directly from motor racing technology and formulated for use in the latest passenger car and van engine designs. It has proved to be far superior to conventional oils and provides the following advantages:

Morris Multivis CST SS 10W-40 is a semi-synthetic engine oil manufactured from advanced Group II and Group III base fluids and the latest additive technology.

Golden Film SAE 15W-50 Classic Motorsport oil is manufactured from high quality mineral oils and an advanced additive system and is designed primarily for petrol engines.

K15is a black residual lubricant, which has been compounded with fatty agents to give extra oiliness and water resistance. This tough lubricant has tremendous film strength and adhesion to metal surfaces. It acts as a cushion between moving parts, providing outstanding protection against wear, rust, corrosion, and quietening of noisy gears. This lubricant is not dislodged from metal parts by water

A fully biodegradeable product developed specifically for metal cutting applications where the lubricant is applied by air-misting.

Workshop Pro Solvent Degreaser is a ready for use, pink coloured emulsifiable fluid, manufactured from a highly refined hydrocarbon solvent and a non-ionic surfactant. It was originally developed for rapid de-waxing of car bodies. 

Premium Blue lithium / calcium base grease is an extremely sophisticated lithium / calcium base grease which incorporates modern polymer technology. This advanced grease has a high level of water tolerance, mechanical stability and adherence. has exceptional load carrying ability and will cope with constant high levels of loads and shock loading. Its wide application temperature range makes

A highly effective flushing additive, designed to be added to old cutting fluid emulsions to assist cleaning of system prior to changing.    

A high performance neat cutting oil specifically developed for use on severe applications.

A range of fully synthetic gear oils, manufactured from polyalkylene glycol (PAG) fluids and specialised extreme pressure (EP) additives, to provide outstanding protection at all temperatures to industrial gear systems. Unlike conventional gear oils PAG fluids maintain an effective lubricating film over a wide operating temperature range, from artic conditions to high thermal loadings. PAG Fluids

A translucent green, biostable, micro-emulsion metalworking fluid that offers excellent workpiece visibility and extended sump life. It is non-staining to ferrous and non-ferrous materials which enables it to be used on a wide variety of metals from medium tensile and high carbon steels to cuprous alloys and cast iron. It is particularly suited to modern CNC machning centres. Premiercut GP is ideal

A nitrite-free, mineral oil free grinding fluid incorporating the latest biostable technology.

A range of fully synthetic gear oils, manufactured from polyalkylene glycol (PAG) fluids and specialised extreme pressure (EP) additives, to provide outstanding protection at all temperatures to industrial gear systems. Unlike conventional gear oils PAG fluids maintain an effective lubricating film over a wide operating temperature range, from artic conditions to high thermal loadings. PAG Fluids

A premium quality Hydraulic oil formulated from Group I mineral base oils with additives to provide excellent protection against oxidation, corrosion, wear and foaming. This hydraulic oil is blended to ISO 32 viscosity grade requirements and is suitable for use in a wide range of mobile and static hydraulic equipment...

Race Performance 2T is recommended for all two stroke engines, whether premix or injector, where an oil of this specification is demanded. Check the manufacturer’s handbook for mixing method and dilution ratios. Ideal for engines used for high mileage or stop/start duties, where reliability is paramount, i.e. messenger fleets.

Workshop Pro Surface Conditioner is a special blend of silicone, solvents and cleaners. It has been designed as a multipurpose product that cleans, restores and protects surfaces at the same time.

TDR Paste: A waxy paste usually applied by dipping the tool into the product.  

A viscous liquid usually applied by the use of squeeze or dripping bottle.

Workshop PRO Anti-Seize is a lead and CFC free compound, made from solvent refined oil, Bentonite thickener and fine copper powder. The product is highly recommended as a thread lubricant on the external parts of all racing motorcycles, where rapid and trouble free disassembly by pit crews is a competitive essential.

Premier slideway 68 is a premium quality machine tool slideway oil formulated to meet the requirements of the latest machine tool slideways, tables, carriages, guides and general machine operations including hydraulics and gear boxes. Slideway oils are formulated from high viscosity index solvent refined mineral base oils fortified with additives to prevent oxidation, corrosion and wear, and deliver excellent lubrication

Forms a good stable milky emulsion, even in hard waters up to 400 ppm Ca CO3 hardness. Good inhibition against corrosion of a wide range of ferrous metals, giving protection to workpiece and machine parts. Also good resistance to contact corrosion, so workpieces may be stacked without staining taking place. Low staining potential on many non-ferrous metals including copper and its alloys

A biostable, semi-synthetic cutting fluid designed for use in applications where extra lubricity and extreme pressure properties are required, such as: Sawing of aluminium and aerospace alloys. Broaching. Screw cutting of alloy steels. Deep hole boring. Spray applied gun drilling Forming.

This is a low viscosity water white mineral oil specially prepared as a reference fluid for diesel injection testing equipment. A fluid such as Seria Fuel Pump Test Oil is produced to very close specification limits, which are essential for accurate and consistent results in test equipment. It is not possible to perform these testing procedures with diesel fuels that can vary considerably in viscosity

Ring Free XHD monogrades are high quality engine oils particularly recommended for haulage, plant contractors and certain mixed fleet operations. They are manufactured from high quality mineral oils and provide protection against wear, rust and corrosion. The technology used in these oils gives excellent results in 4-stroke turbo-charged and naturally aspirated indirect injected diesel engines and

Versimax HD3 20W-50 has high levels of detergency /dispersancy to reduce combustion chamber deposits and ring sticking, as well as preventing excessive soot thickening. This grade will protect from wear, rust and corrosion.

K76 is a premium quality biodegradable bentone thickened automotive grease designed to be fully compatible with all types of natural and synthetic rubber.  When in contact with rubber components, this grease will not cause cracking or undue swelling. K76 acts as an excellent lubricant between rubber components and steel or other metals. Due to the vegetable base oil the grease is resistant to

Versimax HD8 10W/40 is a low SAPS (Sulphated Ash, Phosphorus and Sulphur) synthetic heavy duty diesel specific engine oil. Manufactured from synthetic base fluids this product contains an advanced additive package formulated to provide protection when operating in very severe conditions with extended drain intervals. Versimax HD8 10W/40 meets the heavy duty truck requirements for Low Emission

Versimax HD4 15W-40 is a highly versatile heavy duty engine oil that can be used to rationalise inventories, due to its extensive performance profile.

Ring Free XHD monogrades are high quality engine oils particularly recommended for haulage, plant contractors and certain mixed fleet operations. They are manufactured from high quality mineral oils and provide protection against wear, rust and corrosion. The technology used in these oils gives excellent results in 4-stroke turbo-charged and naturally aspirated indirect injected diesel engines and