Morris Lubricants

Versimax HD17 5W-30 is designed for use in diesel engines meeting Euro IV, V and VI emission requirements where an oil of this quality is specified.

Morris Golden Film 10W-40 is suitable for use in passenger cars and light commercial vehicles, that may have originally specified a 10W-40 or where engines have been rebuilt or restored.

Morris Airforce VPO HV is recommended for use in a wide range of positive displacement vacuum pumps, including rotary vane, lobe, screw and reciprocating designs.

Morris K65 is an industrial, extreme temperature, medium consistency plain and rolling bearing grease for applications at operating temperatures up to 600°C.

Typical applications include: kiln car bearings, furnace doors, drying tunnel mechanisms and other applications where high temperatures are encountered.

Versimax HD12 15W-40 is designed for use in Euro 5 / Euro 6, Interim Tier 4 / Stage 3B / Tier 4 and Stage 4 diesel engines

Morris Versimax HD14 10W-30 is designed for use in Euro 5 / Euro 6, Interim Tier 4 / Stage 3B / Tier 4 and Stage 4 diesel engines

Multitrans VTS is recommended for use in the automatic transmissions of commercial vehicles, buses, coaches, off-highway / construction equipment and passenger cars. The product may also be used in certain hydraulic applications, where a fluid of this type and specification is required. 

Versimax HD11 5W-30 is a top tier heavy duty diesel specific engine oil that has been designed to meet the necessary chemical limits required to maintain the efficiency of exhaust aftertreatment devices

Magnol HVI46 High Viscosity Index Oil is recommended for both Industrial and off highway hydraulic systems, where extreme operating conditions are encountered. Can also be used in hydrostatic drives, power steering systems, brake systems and other applications where products of this type and specification required.

Multivis ECO VB 0W-20 is a high performance fully synthetic engine oil formulated to cope with the exacting demands of OEMs requiring low viscosity engine oils, in particular Volkswagen Audi Group.

Lodexol MTFE 75W is a high performance, fully synthetic gear oil formulated and optimised for use in automotive gearboxes requiring a low viscosity SAE 75W. Lodexol MTFE 75W will provide potential fuel saving performance due to its low viscosity, which minimises friction in the gearbox. 

Multivis ECO PC 0W-30 is a new generation passenger car engine oil formulated and developed for the latest PSA petrol and diesel engines, including hybrids

Faracut HS3 is a highly refined cutting oil with special lubricity additives to enhance cutting without the use of Chlorine, Sulphur or Phosphorus

Morris Lubricants Multivis ADT FD 5W-30 is a synthetic tehnology engine oil specially formulated to meet the superior performance and fuel efficiency requirements of the latest generation of Ford diesels.

Multivis ECO V 0W-30 is an engine oil providing not only the potential for fuel savings but a high level of component protection under a wide range of operating conditions in passenger cars or light commercial vehicles.

Multivis ECO H 0W-16 is a high performance synthetic engine oil formulated to cope with the exacting
demands of OEMs requiring low viscosity engine oils. 

Manufacturers include Honda, Toyota, Mitsubishi, Nissan and Suzuki (Baleno (A1K412 SHVS), Ignis (ATK412 & ATK412 SHVS), Swift (A2LL412 & A2L412 SHVS)).

This product is the only acceptable transmission fluid for NAG2V Sport transmissions and the 7GTronic models: W7A 700 / NAG2. Additional applications include 5-speed models that employ a
controlled torque converter lockup clutch for rear-wheel drive vehicles, which are also fitted in certain
Chrysler models. These model designations are: 722.6 / W5A 580 / NAG1.

Multi-System Central Hydraulic Fluid is an advanced synthetic formulation for use in applications and vehicle systems that require the use of CHF 11S and CHF 202 fluids, both of which are registered trade marks of Deutsche Pentosin-Werke GmbH. This product may also be used in all applications that require the use of LHM Plus fluid.

Ankor ST is a solvent deposited, short to medium term rust preventative, for use on components that are exposed for relatively short time periods or in less harsh environments. This product has low surface tension and viscosity and therefore spreads rapidly, penetrating into less accessible areas and covering all surfaces however irregular. It dries to leave a continuous protective coating

Ankor RR is a general purpose de-watering fluid and thin film solvent deposited rust preventative. Ankor RR has a low viscosity and surface tension to aid the penetration and spreading ability into the less accessible parts whilst imparting the required de-watering action. Once dry Ankor RR leaves a soft oily thin film that will impart corrosion protection for a variety of materials under

This product has a very low surface tension and viscosity and therefore spreads rapidly, penetrating into all hard to reach parts and covering all surfaces however irregular. It dried to leave a continuous protective coating of viscous petroleum products and additives that have powerful rust preventative properties. This product is particularly useful where the metal parts to be treated

Morris Multivis ECO FB 5W-20 is recommended for use where manufacturers specify an SAE 5W-20 complying with one of the following performance
levels. Ford WSS-M2C948-B, API SP, ACEA C5

Workshop Pro White Spray Grease is a combination of a Calcium and Zinc based grease in an aerosol form offering good resistance to water and heat. The product also offers long lasting protection against corrosion.

Morris Race Gear Oil has an extremely low fluid friction and does not rob power at start up or during racing. Recommended for use in all types of racing and competition gearboxes, where a SAE 75W-90 or SAE 10W-40 is specified.

Multivis V 0W-20 is a low viscosity engine oil providing not only the potential for fuel savings, but a high level of component protection under a wide range of operating conditions in passenger cars

Morris Lodexol XFS 75W-90 is based on synthetic oil technology and will protect limited slip differentials fitted to high performance cars and motorsport models. Additionally this grade may be used in various other automotive drive axles, where a SAE 75W/90, API GL5 lubricant is required.

Description

K968 is a premium quality, water resistant grease for use in food processing environments where incidental food contact may occur.

Multivis ECO-S 0W/20 is a high performance fully synthetic engine oil formulated to cope with the exacting demands of OEMs requiring low viscosity engine oils.

Morris Bearing Oils are recommended for all total loss applications where the special properties of these oils are needed

Morris Bearing Oils are recommended for all total loss applications where the special properties of these oils are needed.

This oil has been manufactured for the special requirements of these engines using today’s technology and materials. The traditional technology used in this oil provides outstanding, resistance to rust, corrosion, wear and oxidation, even in the presence of water. This oil also has a high viscosity index, giving good flow rates to bearings and all moving parts at low start up temperatures, coupled

Golden Film AG Gear Oils are a range of mineral oil based lubricants, formulated without extreme pressure (EP) additives. These oils have good natural film strength, anti-foam performance and long term stability.

SUPERCUT G has multi-metal compatibility, tolerance to tramp oil and bacterial degradation , helps reduce tool wear and gives excellent surface finishes on many different alloys.  Supercut G has been developed specifically for use with the more difficult to machine alloys and aluminium.  Carefully selected corrosion inhibitor systems ensure stain free performance on most metals including steels

SUPERCUT 3000 is a micro-emulsion metalworking fluid that is readily miscible with most mains water producing a transparent blue emulsion that is suited to a wide variety of applications.

Atonal Heat Transfer Oils are manufactured with high quality mineral oils and incorporate powerful oxidation inhibitors to ensure the necessary thermal stability for high working temperatures over long periods.  These products contain additives to prevent rust and corrosion that can occur in systems that are vulnerable to condensation between operations.  Anti-foam additives are also incorporated

Astra Slideway Lubricants have been specifically developed for the lubrication of machine tool slideways and tables. They have been formulated from high quality mineral oil, performance additives and incorporate a tackifier to ensure that the lubricant adheres to the moving parts at all times. The performance additives provide outstanding resistance to oxidation, corrosion and wear and eliminate stick

Astra Slideway Lubricants have been specifically developed for the lubrication of machine tool slideways and tables. They have been formulated from high quality mineral oil, performance additives and incorporate a tackifier to ensure that the lubricant adheres to the moving parts at all times. The performance additives provide outstanding resistance to oxidation, corrosion and wear and eliminate stick

These products contain additives to prevent rust and corrosion that can occur in systems that are vulnerable to condensation between operations.  Anti-foam additives are also incorporated to encourage the release of entrained air and to collapse foam. This is vitally important as air bubbles or foam can reduce the effectiveness of the heat transfer system.Atonal Heat Transfer Oils also contain

Morris Race Light Gear Oil is the first choice for all high performance road and competition machines where a 10W-40 grade is specified.