Morris Compound Steam Cylinder Oil 680

£40.90 (£49.08 inc VAT)
CSS
In stock
  • View all pack sizes as list

Morris Compound 680

Steam Cylinder Oil

Description:

These oils are for use in most Locomotives and Stationary engines working with saturated steam. They are produced from special cylinder stock treated with fatty compounds and particularly Tallow to provide superior lubrication even if wet conditions are encountered. The fatty compounds form emulsions which spread the oil on the internal surfaces, providing a strong lubricating film where needed to protect bores and valves. This is particularly important where very wet steam has to be handled at the cylinders, or water treatment chemicals are carried within the steam.

Features:

  • Corrosion protection particularly over-wintering
  • Compatible with a wide variety of steam types (saturated to low superheat)
  • Minimal piston deposits
  • High lubricity

Applications:

Compound steam 460 and 680 oils are ideally suited for all steam engines working up to pressures of 175lbs per square inch. With typical steam temperatures up to 450ºF (230ºC). In addition to cylinders, it is recommended for valve chests, slides, linkages and general lubrication by means of mechanical applicators, atomisers or oil can.

Important Note: These oils must not be used where the steam is being recovered for use as a boiler or process feed and complete separation from oil is essential.

Physical Characteristics:

See data sheet
Fluid Base / Additives:
  • Mineral
Product Type:
  • Steam Cylinder Oil
Size:
  • 25 Ltr
  • 5 Ltr
Available Sizes:
CSS 005 - 5 Ltr

Other Customers Also Bought Other Customers Also Bought