Neat Cutting oils & Pastes

A range of Neat oils & Pastes for a wide variety of operations, where you do not want a water soluble product.

£17.73 (£21.28 inc VAT)
Extreme Pressure, 500 ml
MCT Lubricants are advanced extreme pressure metal cutting products for all hand applied machining operations, in particular, blind hole tapping and drilling. Extreme pressure properties make them highly effective on difficult materials and work hardening alloys such as stainless, high tensile steels and nimonics.  MCT Lubricants are available in liquid and compound forms to suit users&rsquo
In stock
 

£11.33 (£13.60 inc VAT)
Free from MCCPs, High Lubricity, Extreme Pressure, Cutting Compound, 500 gm

TDR Paste: A waxy paste usually applied by dipping the tool into the product.  

In stock

£53.94 (£64.73 inc VAT)
High Lubricity, Extreme Pressure, Cutting Oil, 5 Ltr

A viscous liquid usually applied by the use of squeeze or dripping bottle.

In stock

£159.50 (£191.40 inc VAT)
Contains anti-oxidant and anti-corrosion additives, Based on severely refined mineral oil for optimum health and safety, Suitable for wide range of metals, Mineral, Cutting Oil, 25 Ltr

A light coloured medium viscosity neat cutting oil, designed for general purpose light duty machining operations.

In stock

£161.90 (£194.28 inc VAT)
25 Ltr, Fully Synthetic, Mineral Oil Free, Premier Super Synth 1005 - 25 Ltr

A fully synthetic (mineral oil free) metalforming fluid with very high lubricity. This makes it suitable for a wide range of applications and metals.

In stock
 

Minimum quantity for "Premier Super-Synth 1005" is 8.


£148.76 (£178.51 inc VAT)
Effective on severe applications, Synthetic EP lubricity package, Non active EP additives, Solvent refined mineral oil, Outstanding resistance to oxidation, Mineral, Cutting Oil, 25 Ltr

A high performance neat cutting oil specifically developed for use on severe applications.

In stock

£180.60 (£216.72 inc VAT)
Mineral, Non staining, Low Mist, Low Odour, Extreme Pressure, Cutting Oil, 205 Ltr, 25 Ltr, COB 025 - 25 Ltr

Morris Cora B is suited to general machining operations on ferrous metals up to medium tensile steels and non-ferrous metals. The additive system ensures improved surface finish and tool life whilst remaining non-staining to copper and its alloys.

In stock
 

£150.44 (£180.53 inc VAT)
Cutting Oil, Mineral, 25 Ltr, COF 025 - 25 Ltr
Recommended for a wide range of operations, especially those of a more arduous nature involving hardened steels and hardened non-ferrous alloys. High levels of extreme pressure and lubricity additives help reduce tool wear and tool breakages whilst improving surface finishes. The low viscosity ensures the product has excellent penetration, particularly important in tapping and deep hole drilling applications
In stock
 

£177.50 (£213.00 inc VAT)
Semi-Synthetic, Phosphorus free, Sulphur Free, Chlorine Free, Cutting Oil, 25 Ltr, FSH025 - 25 Litre

Faracut HS3 is a highly refined cutting oil with special lubricity additives to enhance cutting without the use of Chlorine, Sulphur or Phosphorus

In stock
 

£129.16 (£154.99 inc VAT)
Mineral, Extreme Pressure, Cutting Oil, 25 Ltr, MRD 025 - 25 Ltr
A neat cutting oil with high levels of active sulphurised fat and chlorine EP additives, making it suitable for a variety of medium to heavy duty machining operations on ferrous metals. Particularly suited to thread rolling and gear cutting on medium to high tensile steels.
In stock
 

£160.91 (£193.09 inc VAT)
205 Ltr, 25 Ltr, MDE 025 - 25 Ltr
Marcia DE is a heavy duty neat cutting oil containing high levels of extreme pressure additives. These along with the excellent lubricity provided by sulphurised esters and other lubricity additives ensures a high performance in many arduous applications involving ferrous feedstocks, high alloyed steels, high tensile steels and stainless steels. Marcia DE is formulated to ensure excellent surface
In stock
 

£152.33 (£182.80 inc VAT)
Active Sulfur, High Lubricity, Low Mist, Low Viscosity, Extreme Pressure, 25 Ltr, MAH 025 - 25 Ltr

Specially selected base oils and additives ensure a low misting potential in use, whilst also ensuring excellent flushing of honing stones and excellent swarf separation. Marcia H may also be utilised in a number of  light to medium duty applications involving free cutting ferrous alloys.

In stock
 

£157.12 (£188.54 inc VAT)
25 Ltr, MAT 025 - 25 Ltr

Contains high levels of extreme pressure and lubricity additives thereby making it suitable for many arduous applications on hardened ferrous metals, high alloy steels and stainless. Despite its high EP loading Marcia T is a light coloured, low odour product, and hence has better operator acceptability than traditional products based on sulphurised fats.The high levels of EP and lubricity additives

In stock