Construction and Plant

Terrain XL 10W-30 high performance heavy duty multigrade engine oil recommended for diesel units fitted to off-highway equipment operating under varying work loads. Terrain XL 10W-30 provides high levels of cleanliness, wear, rust and oxidation protection, together with outstanding soot handling and sludge dispersancy.

Morris EP 85W-140 Gear Oil is designed for use in a wide variety of applications, including: manual gearboxes, transaxles, transfer boxes, PTO boxes, reduction hubs/gear, differentials (including hypoid designs), axles, planetary and epicyclic drives, shaft drives, sprocket drives, track drives, track rollers, track idlers, hoist/winch gearboxes, steering boxes, oil lubricated bearings, swivel housings, swing gearboxes, slewing rings/gears, etc.

Morris Lubricants Ultralife 1 is suitable for the cooling systems of modern engines in passenger car, trucks, agricultural and contractors plant, where an OAT antifreeze is demanded by the following OEMs:

Morris Lubricants Ultralife 3 can be used in internal combustion engines (ICEs), hybrids and the indirect cooling systems of battery electric vehicles (BEVs) where any of the specifications listed are demanded by the equipment manufacturer.

Lydian Degreaser is recommended for removal of oil grease and dirt from metal, paintwork and concrete. Typical uses include cleaning used engines prior to overhaul, removing build-up on pipes and steelworks, cleaning concrete and brickwork. Many uses can be found in factories, yards and

compounds, where oil and grease build up is a problem, or perhaps even dangerous for vehicles and pedestrians. 

Morris Lubricants Ultralife 2 may be used with confidence in engines manufactured from cast iron, aluminium or combinations of the two metals, and in cooling systems made of aluminium or copper alloys. It is particularly recommended for use in Asian OEM’s, in line with their basic chemistry
requirements.

Morris Liquimatic 33G is recommended for use in all Ford automatic transmissions where a M2C 33G qualified product has been specified. Other transmission applications include Borg Warner, ITL (JCB) and certain Land Rover units.

Versimax HD8 10W/40 is a low SAPS (Sulphated Ash, Phosphorus and Sulphur) synthetic heavy duty diesel specific engine oil. Manufactured from synthetic base fluids this product contains an advanced additive package formulated to provide protection when operating in very severe conditions with extended drain intervals. Versimax HD8 10W/40 meets the heavy duty truck requirements for Low Emission

K6 is a premium quality, water resistance grease for use in industrial and marine applications where the presence of water and humid atmospheres can effect lubricating performance and be detrimental to the protection of parts from corrosion. K6 is further enhanced with a special additive which provides additional protection and lubrication in areas where excessive levels of water are prevalent such

Ultralife HD is ethylene glycol based antifreeze, which uses Organic Acid Technology and is free from nitrites, amines, phosphates, borates and silicates.

Manufactured from a Calcium soap base and highly refined mineral oil, with added graphite to provide boundary lubrication and protection against seizure in conditions when ordinary greases would fail. Also included in this grease are additives to prevent corrosion, rust and oxidation. Additionally, this grease shows excellent resistance to severe mechanical working.

These multipurpose Lithium based greases are prepared from highly refined mineral oil, with the addition of powerful sulphur phosphorus extreme pressure additives. This range of greases has exceptional mechanical stability, maintaining their consistency even after severe working. They are resistant to water washing, protect against rust and are non-corrosive to non-ferrous bearing metals and steel

This  semi fluid, soft Lithium based greases has been specially designed for use in centralised lubrication systems. It is easily pumped, has superb oxidation resistance, exceptional mechanical stability, good water resistance and rust protection and can be used over a wide range of operating temperatures.It conforms to all leading bearing manufacturers specifications for general purpose

Premium hydraulic oils - ISO VG 68, excellent anti-wear properties and corrosion inhibition. Good anti-foam plus rapid air release prevents sponginess, ensuring a positive hydraulic response. Ideal for use in mobile plant.

A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater. Excellent anti-wear and EP properties provide protection against wear in the most demanding of systems.

A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater. Excellent anti-wear and EP properties provide protection against wear in the most demanding of systems.

A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater. Excellent anti-wear and EP properties provide protection against wear in the most demanding of systems.

A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater.

A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater. Excellent anti-wear and EP properties provide protection against wear in the most demanding of systems.

Morris Duplex CDX 15W/40 is a mixed fleet lubricant, incorporating high quality minerals oils and performance additives, suitable for use in a wide variety of diesel and petrol engine designs, including turbocharged versions. This grade will protect engine components from rust and corrosion and provide high levels of engine cleanliness, even in extended oil drain applications.

Morris Ultralife 4 provides long-life protection against all forms of corrosion by the use of optimised and patented organic corrosion inhibitors. This product does not contain nitrates, nitrites, amines,

borates or silicates. Excellent and lasting high temperature corrosion protection is provided for
the aluminium heat transfer surfaces contained in modern engines. Furthermore, Ultralife 4 offers
excellent cavitation protection.

Ring Free XHD monogrades are high quality engine oils particularly recommended for haulage, plant contractors and certain mixed fleet operations. They are manufactured from high quality mineral oils and provide protection against wear, rust and corrosion. The technology used in these oils gives excellent results in 4-stroke turbo-charged and naturally aspirated indirect injected diesel engines and

Ring Free XHD monogrades are high quality engine oils particularly recommended for haulage, plant contractors and certain mixed fleet operations. They are manufactured from high quality mineral oils and provide protection against wear, rust and corrosion. The technology used in these oils gives excellent results in 4-stroke turbo-charged and naturally aspirated indirect injected diesel engines and

Ring Free XHD monogrades are high quality engine oils particularly recommended for haulage, plant contractors and certain mixed fleet operations. They are manufactured from high quality mineral oils and provide protection against wear, rust and corrosion. The technology used in these oils gives excellent results in 4-stroke turbo-charged and naturally aspirated indirect injected diesel engines and

Ring Free XHD monogrades are high quality engine oils particularly recommended for haulage, plant contractors and certain mixed fleet operations. They are manufactured from high quality mineral oils and provide protection against wear, rust and corrosion. The technology used in these oils gives excellent results in 4-stroke turbo-charged and naturally aspirated indirect injected diesel engines and

K3 is a premium quality, water resistant grease for use in industrial and marine applications where the presence of water and humid atmospheres can effect lubricating performance and be detrimental to the protection of parts from corrosion. K3 is further enhanced with a special additive which provides additional protection and lubrication in areas where excessive levels of water are prevalent such

Agrimax® HY is a hydraulic/transmission fluid formulated with high quality mineral oils and specialised additives for use in agricultural and plant equipment, where the Case MS1207/1209 specifications are called for.

Magnol HVI46 High Viscosity Index Oil is recommended for both Industrial and off highway hydraulic systems, where extreme operating conditions are encountered. Can also be used in hydrostatic drives, power steering systems, brake systems and other applications where products of this type and specification required.