Brand Selector

Manufactured from a Calcium soap base and highly refined mineral oil, with added graphite to provide boundary lubrication and protection against seizure in conditions when ordinary greases would fail. Also included in this grease are additives to prevent corrosion, rust and oxidation. Additionally, this grease shows excellent resistance to severe mechanical working.

K15is a black residual lubricant, which has been compounded with fatty agents to give extra oiliness and water resistance. This tough lubricant has tremendous film strength and adhesion to metal surfaces. It acts as a cushion between moving parts, providing outstanding protection against wear, rust, corrosion, and quietening of noisy gears. This lubricant is not dislodged from metal parts by water

Groundforce SAE 30 is a low ash lubricant designed for use in older horticultural equipment powered by petrol and diesel engines where monograde oils are recommended. The oil is blended from solvent refined base stocks and performance additives to control vanish, soot, dispersancy, low temperature sludge, oxidation, rust and corrosion. Groundforce SAE 30 is particularly suitable where machinery has

Groundforce Croma 30 Cutter Bar Oil is designed to meet all lumber industry, forestry, woodyard and estate management requirements. Provides excellent corrosion protection and improved chain performance in a wide range of climatic conditions.
 

Groundforce 2T has been developed to meet the requirements of small high revving air cooled 2-stroke engines in horticultural and agricultural equipment. The lubricating film is strong enough to prevent engine lock up in moments of temporary overheating and provides maximum film strength and anti-wear performance. Reduced smoke and clean burning characteristics mean that deposit formation in the ports

Groundforce 2HSS is a top quality synthetic boosted 2-stroke oil, utilising the latest performance additive technology, for protection and performance.

Groundforce SAE 10W-40 is designed to cope with the difficult conditions found in four stroke diesel and petrol engines fitted to horticultural, garden machinery and stationary equipment where multigrade oils are recommended. The oil is blended from solvent refined base stocks and performance additives to control vanish, soot dispersancy, low temperature sludge, oxidation, rust and corrosion. Groundforce SAE 10W-40 is recommended for all year use.

Golden Film Classic Motor Oils are a specialist range of high quality, low detergent/dispersant monograde lubricants. These oils are suitable for use in naturally aspirated four stroke petrol and diesel engines and classic gearbox designs.

Golden Film Classic Oils are a specialist range of high quality, low detergent/dispersant monograde lubricants. These oils are suitable for use in naturally aspirated four stroke petrol and diesel engines and classic gearbox designs.

Golden Film Classic Motor Oils are a specialist range of high quality, low detergent/dispersant monograde & multi-grade lubricants. These oils are suitable for use in naturally aspirated four stroke petrol and diesel engines and classic gearbox designs.

Golden Film SAE 20W-50 Classic Oil is specialist high quality, low detergent/dispersant multigrade lubricant.  This oil is suitable for use in naturally aspirated four stroke petrol and diesel engines..

Golden Film Classic Oils are a specialist range of high quality, low detergent/dispersant monograde & multi-grade lubricants. These oils are suitable for use in naturally aspirated four stroke petrol and diesel engines and classic gearbox designs.

Golden Film SAE 15W-50 Classic Motorsport oil is manufactured from high quality mineral oils and an advanced additive system and is designed primarily for petrol engines.

The use of Morris Golden Film running-in oil during the running in period helps to remove the machining glaze from cylinder bores, assists the formation of essential oil retaining surfaces, and therefore prevents the possibility of bore polishing.

Morris Lubricants - Golden Film Flushing Oil is a combination of highly refined light mineral oils and detergent/dispersant additives to enhance removal of sludge and lacquers. Flushing oil can be used where a system’s history is unknown or the service fill lubricant may have been used beyond its oil drain interval. This product can also be used if the service fill lubricant has to be drained because of a contamination

Morris Golden Film classic 2-stoke is an ideal choice for 1950’s, 1960’s and 1970’s British, Japanese and European classic 2-Stroke motorcycle and scooter engines

Golden Film AG Gear Oils are a range of mineral oil based lubricants, formulated without extreme pressure (EP) additives. These oils have good natural film strength, anti-foam performance and long term stability.

Golden Film AG Gear Oils are a range of mineral oil based lubricants, formulated without extreme pressure (EP) additives. These oils have good natural film strength, anti-foam performance and long term stability.

Golden Film AG Gear Oils are a range of mineral oil based lubricants, formulated without extreme pressure (EP) additives. These oils have good natural film strength, anti-foam performance and long term stability.

Morris Golden Film 10W-40 is suitable for use in passenger cars and light commercial vehicles, that may have originally specified a 10W-40 or where engines have been rebuilt or restored.

Developed to offer improved performance capable of meeting the demands of vane pumps used in biogas digestion plants. Formulated from high quality Group II base oils and a combination of ashless additives that provide excellent
oxidation stability, protection against rust & corrosion, low foaming and excellent demulsibility.

Morris GEO Ultra Plus 40 is a premium high performance, low ash gas engine oil formulated
to lubricate high-output, 4-cycle natural gas engines operating on special gases such as
landfill and Bio digestion.

Morris GEO LZ 40 is a premium high performance, low ash gas engine oil formulated to lubricate high-output, 4-cycle natural gas engines operating on special gases such as landfill and bio digestion.

Morris GEO Plus MA 40 is a premium high performance, medium ash gas engine oil formulated to lubricate high-output, 4-cycle natural gas engines operating on special gases such as landfill and Bio digestion. The product has specially been developed for use in environments where the gas feed is at its harshest including high levels of H2S.

Morris EP 85W-140 Gear Oil is designed for use in a wide variety of applications, including: manual gearboxes, transaxles, transfer boxes, PTO boxes, reduction hubs/gear, differentials (including hypoid designs), axles, planetary and epicyclic drives, shaft drives, sprocket drives, track drives, track rollers, track idlers, hoist/winch gearboxes, steering boxes, oil lubricated bearings, swivel housings, swing gearboxes, slewing rings/gears, etc.

Morris EP80W-90 Gear Oil is designed for use in a wide variety of applications, including: manual gearboxes, transaxles, transfer boxes, PTO boxes, reduction hubs/gear, differentials (including hypoid designs), axles, planetary and epicyclic drives, shaft drives, sprocket drives, track drives, track rollers, track idlers, hoist/winch gearboxes, steering boxes, oil lubricated bearings, swivel housings, swing gearboxes, slewing rings/gears, etc.

Morris Duplex CDX 15W/40 is a mixed fleet lubricant, incorporating high quality minerals oils and performance additives, suitable for use in a wide variety of diesel and petrol engine designs, including turbocharged versions. This grade will protect engine components from rust and corrosion and provide high levels of engine cleanliness, even in extended oil drain applications.

Crystal White Oils are highly refined medicinal grades, that are water white in colour, odourless and tasteless. These products are extremely stable and will not break down or form sludges. Category Code: H1, HX-1, 3H

Morris Heavy Liquid Paraffin is a highly refined medicinal white oil grade that is water white in colour, odourless and tasteless. This product is extremely stable and will not break down or form sludges.

Morris Cora B is suited to general machining operations on ferrous metals up to medium tensile steels and non-ferrous metals. The additive system ensures improved surface finish and tool life whilst remaining non-staining to copper and its alloys.

This oil is for use in most Locomotives and Stationary engines working with either saturated or superheated steam. It is produced from special cylinder stock treated with fatty compounds and particularly Tallow to provide superior lubrication even if wet conditions are encountered. The fatty compounds form emulsions which spread the oil on the internal surfaces, providing a strong lubricating film

Compound Steam Cylinder Oils 460, are for use in most Locomotives and Stationary engines working with either saturated or superheated steam.

Steam Car Compound 1000 Cylinder Oil is for use in most Locomotives and Stationary engines working with either saturated or superheated steam.

Morris Brake Fluid is made from high molecular weight polyalkylene glycol ethers and polyalkylene glycol ether borates, to give a high boiling point fluid of DOT 4 quality.

Morris Bearing Oils are recommended for all total loss applications where the special properties of these oils are needed

Morris Bearing Oils are recommended for all total loss applications where the special properties of these oils are needed.

Atonal Heat Transfer Oils are manufactured with high quality mineral oils and incorporate powerful oxidation inhibitors to ensure the necessary thermal stability for high working temperatures over long periods.  These products contain additives to prevent rust and corrosion that can occur in systems that are vulnerable to condensation between operations.  Anti-foam additives are also incorporated

These products contain additives to prevent rust and corrosion that can occur in systems that are vulnerable to condensation between operations.  Anti-foam additives are also incorporated to encourage the release of entrained air and to collapse foam. This is vitally important as air bubbles or foam can reduce the effectiveness of the heat transfer system.Atonal Heat Transfer Oils also contain

Astra Slideway Lubricants have been specifically developed for the lubrication of machine tool slideways and tables. They have been formulated from high quality mineral oil, performance additives and incorporate a tackifier to ensure that the lubricant adheres to the moving parts at all times. The performance additives provide outstanding resistance to oxidation, corrosion and wear and eliminate stick

Astra Slideway Lubricants have been specifically developed for the lubrication of machine tool slideways and tables. They have been formulated from high quality mineral oil, performance additives and incorporate a tackifier to ensure that the lubricant adheres to the moving parts at all times. The performance additives provide outstanding resistance to oxidation, corrosion and wear and eliminate stick

Astra Slideway Lubricants have been specifically developed for the lubrication of machine tool slideways and tables. They have been formulated from high quality mineral oil, performance additives and incorporate a tackifier to ensure that the lubricant adheres to the moving parts at all times. The performance additives provide outstanding resistance to oxidation, corrosion and wear and eliminate stick

Astra Slideway Lubricants have been specifically developed for the lubrication of machine tool slideways and tables. They have been formulated from high quality mineral oil, performance additives and incorporate a tackifier to ensure that the lubricant adheres to the moving parts at all times. The performance additives provide outstanding resistance to oxidation, corrosion and wear and eliminate stick