Brand Selector

This oil is for use in most Locomotives and Stationary engines working with either saturated or superheated steam. It is produced from special cylinder stock treated with fatty compounds and particularly Tallow to provide superior lubrication even if wet conditions are encountered. The fatty compounds form emulsions which spread the oil on the internal surfaces, providing a strong lubricating film

Morris Lubricants - Multivis ADT C2 5W-30 is a mid-SAPS synthetic based multigrade engine oil formulated to meet the superior performance and fuel efficiency requirements of engines requiring low viscosity oils for gasoline and diesel engine applications.

Morris EP80W-90 Gear Oil is designed for use in a wide variety of applications, including: manual gearboxes, transaxles, transfer boxes, PTO boxes, reduction hubs/gear, differentials (including hypoid designs), axles, planetary and epicyclic drives, shaft drives, sprocket drives, track drives, track rollers, track idlers, hoist/winch gearboxes, steering boxes, oil lubricated bearings, swivel housings, swing gearboxes, slewing rings/gears, etc.

Morris EP 85W-140 Gear Oil is designed for use in a wide variety of applications, including: manual gearboxes, transaxles, transfer boxes, PTO boxes, reduction hubs/gear, differentials (including hypoid designs), axles, planetary and epicyclic drives, shaft drives, sprocket drives, track drives, track rollers, track idlers, hoist/winch gearboxes, steering boxes, oil lubricated bearings, swivel housings, swing gearboxes, slewing rings/gears, etc.

Race 4 TT 10W-40 is recommended for all turbo-charged and naturally aspirated racing engines and super bikes or where the manufacturer specifies an oil of this type and specification.

Golden Film Classic Motor Oils are a specialist range of high quality, low detergent/dispersant monograde lubricants. These oils are suitable for use in naturally aspirated four stroke petrol and diesel engines and classic gearbox designs.

Golden Film Classic Motor Oils are a specialist range of high quality, low detergent/dispersant monograde & multi-grade lubricants. These oils are suitable for use in naturally aspirated four stroke petrol and diesel engines and classic gearbox designs.

Golden Film SAE 20W-50 Classic Oil is specialist high quality, low detergent/dispersant multigrade lubricant.  This oil is suitable for use in naturally aspirated four stroke petrol and diesel engines..

Groundforce SAE 10W-40 is designed to cope with the difficult conditions found in four stroke diesel and petrol engines fitted to horticultural, garden machinery and stationary equipment where multigrade oils are recommended. The oil is blended from solvent refined base stocks and performance additives to control vanish, soot dispersancy, low temperature sludge, oxidation, rust and corrosion. Groundforce SAE 10W-40 is recommended for all year use.

Groundforce 2T has been developed to meet the requirements of small high revving air cooled 2-stroke engines in horticultural and agricultural equipment. The lubricating film is strong enough to prevent engine lock up in moments of temporary overheating and provides maximum film strength and anti-wear performance. Reduced smoke and clean burning characteristics mean that deposit formation in the ports

High viscosity index hydraulic oil, formulated from high quality minerals oils and the latest anti-wear technology. Ideal for hydraulic systems subjected to the very extremes of operating conditions and temperatures, from frozen food stores (-20oC) to industrial hydraulic systems at elevated temperatures and off highway equipment.Recommended for both Industrial and off highway hydraulic systems, where

This range of semi fluid, soft Lithium based greases have been specially designed for use in centralised lubrication systems. They are easily pumped, have superb oxidation resistance, exceptional mechanical stability, good water resistance and rust protection and can be used over a wide range of operating temperatures. They conform to all leading bearing manufacturers specifications for general purpose

This Lithium grease is highly recommended for all automotive use where a multipurpose grease is required for wheel bearings and chassis lubrication. This grease is particularly suited for the lubrication of construction and mining equipment such as bulldozers, scrapers, loading shovel and all off highway trucks where greased components are subjected to continuous heavy loads and shock loads.

K2 EP Lithium Complex Red Grease is a mineral oil based lithium complex soap thickened grease, containing performance additives. The additives provide extreme pressure (EP), oxidation, rust and corrosion protection, ensuring effective lubrication is achieved even under the most severe conditions. It has excellent sealing properties which help protect bearings against corrosive atmospheres and the ingress

K48 is specially formulated for use in industrial equipment, cars, vans, trucks and construction plant such as bulldozers, scrapers, loading shovels and dump trucks where it will give superior performance, in all industrial plain and rolling element bearings.

K99 is a premium quality, water resistant grease for use in industrial and marine applications where the presence of water and humid atmospheres can effect lubricating performance and be detrimental to the protection of parts from corrosion. K99 is suitable for plain and antifriction bearings.

FEATURES

Morris Liquimatic DII is recommended for use in all applications where a Dexron® IID is specified, including: automatic transmissions, powershift transmissions, fluid drives, torque converters, power steering units, motorcycle suspension forks, hydraulic systems, brake boosters, transfer boxes, PTOs, hydrostatic drives, etc.

High viscosity index hydraulic oil, formulated from high quality minerals oils and the latest anti-wear technology. They are ideal for hydraulic systems subjected to the very extremes of operating conditions and temperatures, from frozen food stores (-20oC) to industrial hydraulic systems at elevated temperatures and off highway equipment.Recommended for both Industrial and off highway hydraulic systems

A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater.

A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater. Excellent anti-wear and EP properties provide protection against wear in the most demanding of systems.

A mineral based zinc free ISO VG 15 hydraulic oil for use in certain powersteering and brake activator systems, including JCB where specified.     

Morris Lodexol 80W-90 Gear Oil is designed for use in a wide variety of applications, including: manual gearboxes, transaxles, transfer boxes, axles, steering boxes, swivel pin housings, reduction hubs, oil lubricated bearings, power take-offs, hoist/winch gearboxes, slew gearboxes, chain drives, track drives, track rollers and idlers, etc.

Morris Lodexol FS 75W-90 is a synthetic high performance gear oil that has excellent extreme pressure (EP) performance and load carrying ability, as well as providing rust and corrosion protection to transmission components. This grade not only has outstanding low temperature fluidity, eliminating cold start gear selection problems (cold baulking), but can also cope with highly stressed gearboxes running at high temperatures.

Morris Lodexol SS 75W-90 meets API GL4 and API GL5 classifications, enabling grade rationalisation and reduced risk of misapplication. The semi-synthetic formulation also has good cold start fluidity, ensuring fast circulation around gear systems, even when the oil is cold.

Lydian Degreaser is recommended for removal of oil grease and dirt from metal, paintwork and concrete. Typical uses include cleaning used engines prior to overhaul, removing build-up on pipes and steelworks, cleaning concrete and brickwork. Many uses can be found in factories, yards and

compounds, where oil and grease build up is a problem, or perhaps even dangerous for vehicles and pedestrians. 

Superclean Morendo DD is a multifunctional diesel fuel additive that will improve ignition quality, combustion and storage of distillate fuels.

Multivis 5W-30 is a semi-synthetic multigrade engine oil specially formulated to meet the superior performance and fuel efficiency requirements of modern engines requiring low viscosity oils. Enhanced oil flow and film strength give essential protection during start-up. Advanced additive technology provides long-term benefits including reduced wear on critical valve-train components in modern multi

Golden Film SAE 15W-50 Classic Motorsport oil is manufactured from high quality mineral oils and an advanced additive system and is designed primarily for petrol engines.

Premium Blue lithium / calcium base grease is an extremely sophisticated lithium / calcium base grease which incorporates modern polymer technology. This advanced grease has a high level of water tolerance, mechanical stability and adherence. has exceptional load carrying ability and will cope with constant high levels of loads and shock loading. Its wide application temperature range makes

A high performance neat cutting oil specifically developed for use on severe applications.

A premium quality Hydraulic oil formulated from solvent refined mineral base oils with additives to provide excellent protection against oxidation, corrosion, wear and foaming. This hydraulic oil is blended to ISO 32 viscosity grade requirements and is suitable for use in a wide range of mobile and static hydraulic equipment...

A premium quality Hydraulic oil formulated from solvent refined mineral base oils with additives to provide excellent protection against oxidation, corrosion, wear and foaming. This hydraulic oil is blended to ISO 46 viscosity grade requirements and is suitable for use in a wide range of mobile and static hydraulic equipment including forklifts, excavators, lifts, presses

Ring Free XHD monogrades are high quality engine oils particularly recommended for haulage, plant contractors and certain mixed fleet operations. They are manufactured from high quality mineral oils and provide protection against wear, rust and corrosion. The technology used in these oils gives excellent results in 4-stroke turbo-charged and naturally aspirated indirect injected diesel engines and

Versimax HD3 20W-50 has high levels of detergency /dispersancy to reduce combustion chamber deposits and ring sticking, as well as preventing excessive soot thickening. This grade will protect from wear, rust and corrosion.

Ring Free XHD monogrades are high quality engine oils particularly recommended for haulage, plant contractors and certain mixed fleet operations. They are manufactured from high quality mineral oils and provide protection against wear, rust and corrosion. The technology used in these oils gives excellent results in 4-stroke turbo-charged and naturally aspirated indirect injected diesel engines and

Groundforce SAE 30 is a low ash lubricant designed for use in older horticultural equipment powered by petrol and diesel engines where monograde oils are recommended. The oil is blended from solvent refined base stocks and performance additives to control vanish, soot, dispersancy, low temperature sludge, oxidation, rust and corrosion. Groundforce SAE 30 is particularly suitable where machinery has

Race Super 2 is recommended for engines fitted with an oil injector system and has been specially formulated to maintain the correct lubricant metering viscosity in all conditions.

Supercut 4000 is a micro-emulsion metalworking fluid is readily miscible with most mains water to produce a translucent green emulsion that is suited to a wide variety of applications. Supercut 4000 has excellent lubricity, is low foaming, offers excellent workpiece visibility, excellent resistance to bacterial degradation and  extended sump life.  

Premium hydraulic oil - ISO VG 32 with excellent anti-wear properties and corrosion inhibition. Good anti-foam plus rapid air release prevents sponginess, ensuring a positive hydraulic response. Ideal for use in mobile plant.

Morris Liquimatic 33G is recommended for use in all Ford automatic transmissions where a M2C 33G qualified product has been specified. Other transmission applications include Borg Warner, ITL (JCB) and certain Land Rover units.

Ultralife Red will protect all engines from frost damage right down to &ndash40oC (at 50% of total coolant volume). It also provides outstanding protection against rust and corrosion for all parts of the cooling system and is therefore recommended for all year round use. This Ethylene Glycol based antifreeze, which uses Organic Acid technology, is free from nitrites, amines, phosphates, borates and

Multivis ADT VA 5W-30 is a synthetic technology lubricant, designed for use in the latest technology engines, including those fitted with exhaust gas after-treatment devices.

Milking Machine Vacuum Pump Oil is a high quality vacuum pump oil specially developed for use in milking machines. This oil is formulated from specially selected highly refined mineral oils. Milking machine reliability is of the utmost importance in dairy management and therefore this product has been designed with the following outstanding features.

Morris Lubricant Race V-Twin 20W-50 meets the requirements of high performance motorcycles such as BMW, Harley Davidson, Triumph and certain Yamaha models that specify an SAE 20W/50 viscosity engine oil. 

Multilife VX 5W-30 is a fully synthetic advanced lubricant, designed for use in the latest technology engines, including those fitted with exhaust gas after-treatment devices. Multilife VX 5W-30 meets the requirements of VW Standards 504.00 and 507.00 and can be used in all of their current engine designs.