Morris Lubricants

Morris Brake Fluid is made from high molecular weight polyalkylene glycol ethers and polyalkylene glycol ether borates, to give a high boiling point fluid of DOT 4 quality.

This range is mineral oil free and has been specially developed to meet concern over the inevitable spills, leakages and total system losses that frequently occur from burst hoses on hard worked hydraulic equipment. This is particularly important if hydraulic equipment is working where soil or water contamination is a possibility. In addition to the problem of mineral oil pollution, there is now evidence

This range is mineral oil free and has been specially developed to meet concern over the inevitable spills, leakages and total system losses that frequently occur from burst hoses on hard worked hydraulic equipment. This is particularly important if hydraulic equipment is working where soil or water contamination is a possibility. In addition to the problem of mineral oil pollution, there is now evidence

Terralus BVG Hydraulic Oils are a range of readily biodegradable hydraulic oils manufactured to meet the requirements of hydraulic systems in industrial, horticultural and earth moving equipment. This range is mineral oil free and has been specially developed to meet concern over the inevitable spills, leakages and total system losses that frequently occur from burst hoses on hard worked hydraulic

K3 is a premium quality, water resistant grease for use in industrial and marine applications where the presence of water and humid atmospheres can effect lubricating performance and be detrimental to the protection of parts from corrosion. K3 is further enhanced with a special additive which provides additional protection and lubrication in areas where excessive levels of water are prevalent such

Morris Lubricants Marine SAE 10W-40 is a high quality, multigrade engine oil designed for use in canal boats

Morris Duplex CDX 15W/40 is a mixed fleet lubricant, incorporating high quality minerals oils and performance additives, suitable for use in a wide variety of diesel and petrol engine designs, including turbocharged versions. This grade will protect engine components from rust and corrosion and provide high levels of engine cleanliness, even in extended oil drain applications.

Compound Steam Cylinder Oils 460, are for use in most Locomotives and Stationary engines working with either saturated or superheated steam.

Morris Multivis MLR 10W-50 is recommended for all turbo-charged and naturally aspirated petrol and diesel engines, for ordinary road use and also for car racing, endurance events, rallying and all other types of motor sport.

Steam Car Compound 1000 Cylinder Oil is for use in most Locomotives and Stationary engines working with either saturated or superheated steam.

Groundforce Croma 30 Cutter Bar Oil is designed to meet all lumber industry, forestry, woodyard and estate management requirements. Provides excellent corrosion protection and improved chain performance in a wide range of climatic conditions.
 

Workshop Pro Semi-synthetic Chain Lubricant is a specially formulated aerosol designed for the protection of chains used in a variety of applications.

The Terrain CT range is formulated with high quality mineral oils and additives designed to provide the correct frictional characteristics required by Caterpillar in transmission and hydraulic systems. The additive system also gives this oil improved temperature performance, superior resistance to oxidation, rust, corrosion and improved anti-foam properties. In addition these grades have excellent

The Terrain CT range is formulated with high quality mineral oils and additives designed to provide the correct frictional characteristics required by Caterpillar in transmission and hydraulic systems. The additive system also gives this oil improved temperature performance, superior resistance to oxidation, rust, corrosion and improved anti-foam properties. In addition these grades have excellent

The Terrain CT range is formulated with high quality mineral oils and additives designed to provide the correct frictional characteristics required by Caterpillar in transmission and hydraulic systems. The additive system also gives this oil improved temperature performance, superior resistance to oxidation, rust, corrosion and improved anti-foam properties. In addition these grades have excellent

Morris Lubricants - Multivis ADT C2 5W-30 is a mid-SAPS synthetic based multigrade engine oil formulated to meet the superior performance and fuel efficiency requirements of engines requiring low viscosity oils for gasoline and diesel engine applications.

Terralus CBO oil is specially formulated to overcome the environmental concern, of long term potentially harmful ecological effects of mineral based oils in total loss systems, particularly in the agricultural, forestry, horticultural and water industries. The biodegradable products used in the formulation: -&bull Reduce wear on cutter bar chain and sprockets&bull Reduce build up of foam&bull Provide

Ring Free DD 40 is a high quality low ash engine oil designed for use in 2-stroke diesel engines.  This grade has excellent detergency/dispersancy characteristics, resistance to oxidation and good thermal stability.  Ring Free DD 40 will also protect engine components from rust and corrosion. This oil is the outcome of extensive research, development and testing and is particularly recommended

Morris Race Light Gear Oil is the first choice for all high performance road and competition machines where a 10W-40 grade is specified.

Morris EP80W-90 Gear Oil is designed for use in a wide variety of applications, including: manual gearboxes, transaxles, transfer boxes, PTO boxes, reduction hubs/gear, differentials (including hypoid designs), axles, planetary and epicyclic drives, shaft drives, sprocket drives, track drives, track rollers, track idlers, hoist/winch gearboxes, steering boxes, oil lubricated bearings, swivel housings, swing gearboxes, slewing rings/gears, etc.

Morris EP 85W-140 Gear Oil is designed for use in a wide variety of applications, including: manual gearboxes, transaxles, transfer boxes, PTO boxes, reduction hubs/gear, differentials (including hypoid designs), axles, planetary and epicyclic drives, shaft drives, sprocket drives, track drives, track rollers, track idlers, hoist/winch gearboxes, steering boxes, oil lubricated bearings, swivel housings, swing gearboxes, slewing rings/gears, etc.

Morris Lubricants - Golden Film Flushing Oil is a combination of highly refined light mineral oils and detergent/dispersant additives to enhance removal of sludge and lacquers. Flushing oil can be used where a system’s history is unknown or the service fill lubricant may have been used beyond its oil drain interval. This product can also be used if the service fill lubricant has to be drained because of a contamination

Fully Synthetic Chain Lube - protects chains from wear and corrosion. Initialy a thin free-flowing lubricant when sprayed it penetrates into vital inner pins and bushes of the chain links where it cushions against shock loading.

Race 4 TT 10W-40 is recommended for all turbo-charged and naturally aspirated racing engines and super bikes or where the manufacturer specifies an oil of this type and specification.

Morris Bearing Oils are recommended for all total loss applications where the special properties of these oils are needed