Morris Lubricants

Morris Brake Fluid is made from high molecular weight polyalkylene glycol ethers and polyalkylene glycol ether borates, to give a high boiling point fluid of DOT 4 quality.

Race Super 2 is recommended for engines fitted with an oil injector system and has been specially formulated to maintain the correct lubricant metering viscosity in all conditions.

Golden Film AG Gear Oils are a range of mineral oil based lubricants, formulated without extreme pressure (EP) additives. These oils have good natural film strength, anti-foam performance and long term stability.

Workshop ProTraffic Film Remover is a unique combination of surface active agents, sequestrants and alkaline builders with the following features. Effective at higher dilutions. Easily and gently removes road dirt and grime. Ideal for hot or cold pressure wash machines. Effective in hard and soft waters. Contains rinse off additive. Biodegradable. Dyed blue for product identification. Safe on paint work, metal surfaces, glass and rubber. Does not contain ingredients which accelerate metal corrosion.

Terza 7060 is a high quality low viscosity mould release oil containing solvent refined mineral oil, hydrocarbon solvent and lubricity additives.  It has been specially produced for use in high rate production of fired clay and concrete building products.  This is a low viscosity fluid, which after the evaporation of the solvent, dries to a tenacious oily film on the mould surface.  The

Versimax HD4 15W-40 is a highly versatile heavy duty engine oil that can be used to rationalise inventories, due to its extensive performance profile.

Tabor OK finds use in a variety of applications e.g. as a process oil, degreasing medium and as a dielectric fluid for spark erosion.  It is also suitable as a replacement for chlorinated solvents in certain applications and may be used as a lower odour, high flash point alternative to white spirit  where the evaporation rate is not critical.

Groundforce SAE 30 is a low ash lubricant designed for use in older horticultural equipment powered by petrol and diesel engines where monograde oils are recommended. The oil is blended from solvent refined base stocks and performance additives to control vanish, soot, dispersancy, low temperature sludge, oxidation, rust and corrosion. Groundforce SAE 30 is particularly suitable where machinery has

Golden Film AG Gear Oils are a range of mineral oil based lubricants, formulated without extreme pressure (EP) additives. These oils have good natural film strength, anti-foam performance and long term stability.

Morris Duplex CDX 15W/40 is a mixed fleet lubricant, incorporating high quality minerals oils and performance additives, suitable for use in a wide variety of diesel and petrol engine designs, including turbocharged versions. This grade will protect engine components from rust and corrosion and provide high levels of engine cleanliness, even in extended oil drain applications.

When applied to wet parts the chemistry of MD-4 has a powerful attraction to the underlying surfaces and this completely displaces traces of water. Therefore this product is particularly useful as an engine damp start. If the aerosol pack is used, a short spray on to the affected parts will displace any wetness and prevent voltage breakdown, allowing the engine to be started again normally. MD-4 is

High viscosity index hydraulic oil, formulated from high quality minerals oils and the latest anti-wear technology. They are ideal for hydraulic systems subjected to the very extremes of operating conditions and temperatures, from frozen food stores (-20oC) to industrial hydraulic systems at elevated temperatures and off highway equipment.Recommended for both Industrial and off highway hydraulic systems

Tabor 95 is a high quality concrete mould oil specially designed for production of slabs, posts and pavings where precision steel moulds are used. The formulation of light mineral oil, reactive fats and lubricity agents, is free of both solvents and wool fats and therefore the finished product has a low odour and a light colour. This product has better operator acceptability than traditional mould

Multivis ADT C3 5W-30 is a mid SAPS synthetic multigrade engine oil specially formulated to meet the superior performance and fuel efficiency requirements of modern engines requiring low viscosity oils.

Morris EP 85W-140 Gear Oil is designed for use in a wide variety of applications, including: manual gearboxes, transaxles, transfer boxes, PTO boxes, reduction hubs/gear, differentials (including hypoid designs), axles, planetary and epicyclic drives, shaft drives, sprocket drives, track drives, track rollers, track idlers, hoist/winch gearboxes, steering boxes, oil lubricated bearings, swivel housings, swing gearboxes, slewing rings/gears, etc.