Order Hotline: 01782 410381
Universal Anti-freeze will protect all engines from frost damage right down to -34oC and ice damage down to -50oC (at 50% of total coolant volume). It also provides outstanding protection against rust and corrosion for all parts of the cooling system and is therefore recommended for all year round use. This Ethylene Glycol based antifreeze, which meets the technical requirements of BS6580
The use of Morris Golden Film running-in oil during the running in period helps to remove the machining glaze from cylinder bores, assists the formation of essential oil retaining surfaces, and therefore prevents the possibility of bore polishing.
A lead free anti seize compound, made from high quality mineral oils, bentonite (clay) thickener and fine copper powder. Anti-seize properties enable this grease to work even if the joints become so compressed that most of the compound is squeezed out, or excessive temperature flashes off the oily part of the compound. A fine film of copper particles always remain in joints or threads to prevent seizure
Workshop ProTraffic Film Remover is a unique combination of surface active agents, sequestrants and alkaline builders with the following features. Effective at higher dilutions. Easily and gently removes road dirt and grime. Ideal for hot or cold pressure wash machines. Effective in hard and soft waters. Contains rinse off additive. Biodegradable. Dyed blue for product identification. Safe on paint work, metal surfaces, glass and rubber. Does not contain ingredients which accelerate metal corrosion.
Morris Multivis MLR 10W-50 is recommended for all turbo-charged and naturally aspirated petrol and diesel engines, for ordinary road use and also for car racing, endurance events, rallying and all other types of motor sport.
Morris Lubricants - Multivis ADT C2 5W-30 is a mid-SAPS synthetic based multigrade engine oil formulated to meet the superior performance and fuel efficiency requirements of engines requiring low viscosity oils for gasoline and diesel engine applications.
Morris EP80W-90 Gear Oil is designed for use in a wide variety of applications, including: manual gearboxes, transaxles, transfer boxes, PTO boxes, reduction hubs/gear, differentials (including hypoid designs), axles, planetary and epicyclic drives, shaft drives, sprocket drives, track drives, track rollers, track idlers, hoist/winch gearboxes, steering boxes, oil lubricated bearings, swivel housings, swing gearboxes, slewing rings/gears, etc.
Morris EP 85W-140 Gear Oil is designed for use in a wide variety of applications, including: manual gearboxes, transaxles, transfer boxes, PTO boxes, reduction hubs/gear, differentials (including hypoid designs), axles, planetary and epicyclic drives, shaft drives, sprocket drives, track drives, track rollers, track idlers, hoist/winch gearboxes, steering boxes, oil lubricated bearings, swivel housings, swing gearboxes, slewing rings/gears, etc.
This Lithium grease is highly recommended for all automotive use where a multipurpose grease is required for wheel bearings and chassis lubrication. This grease is particularly suited for the lubrication of construction and mining equipment such as bulldozers, scrapers, loading shovel and all off highway trucks where greased components are subjected to continuous heavy loads and shock loads.
K2 EP Lithium Complex Red Grease is a mineral oil based lithium complex soap thickened grease, containing performance additives. The additives provide extreme pressure (EP), oxidation, rust and corrosion protection, ensuring effective lubrication is achieved even under the most severe conditions. It has excellent sealing properties which help protect bearings against corrosive atmospheres and the ingress
K48 is specially formulated for use in industrial equipment, cars, vans, trucks and construction plant such as bulldozers, scrapers, loading shovels and dump trucks where it will give superior performance, in all industrial plain and rolling element bearings.
Morris Liquimatic DII is recommended for use in all applications where a Dexron® IID is specified, including: automatic transmissions, powershift transmissions, fluid drives, torque converters, power steering units, motorcycle suspension forks, hydraulic systems, brake boosters, transfer boxes, PTOs, hydrostatic drives, etc.
Morris Lodexol 80W-90 Gear Oil is designed for use in a wide variety of applications, including: manual gearboxes, transaxles, transfer boxes, axles, steering boxes, swivel pin housings, reduction hubs, oil lubricated bearings, power take-offs, hoist/winch gearboxes, slew gearboxes, chain drives, track drives, track rollers and idlers, etc.
Morris Lodexol FS 75W-90 is a synthetic high performance gear oil that has excellent extreme pressure (EP) performance and load carrying ability, as well as providing rust and corrosion protection to transmission components. This grade not only has outstanding low temperature fluidity, eliminating cold start gear selection problems (cold baulking), but can also cope with highly stressed gearboxes running at high temperatures.
Morris Lodexol SS 75W-90 meets API GL4 and API GL5 classifications, enabling grade rationalisation and reduced risk of misapplication. The semi-synthetic formulation also has good cold start fluidity, ensuring fast circulation around gear systems, even when the oil is cold.
Lydian Degreaser is recommended for removal of oil grease and dirt from metal, paintwork and concrete. Typical uses include cleaning used engines prior to overhaul, removing build-up on pipes and steelworks, cleaning concrete and brickwork. Many uses can be found in factories, yards and
compounds, where oil and grease build up is a problem, or perhaps even dangerous for vehicles and pedestrians.
Superclean Morendo DD is a multifunctional diesel fuel additive that will improve ignition quality, combustion and storage of distillate fuels.
Multivis 5W-30 is a semi-synthetic multigrade engine oil specially formulated to meet the superior performance and fuel efficiency requirements of modern engines requiring low viscosity oils. Enhanced oil flow and film strength give essential protection during start-up. Advanced additive technology provides long-term benefits including reduced wear on critical valve-train components in modern multi
Premium Blue lithium / calcium base grease is an extremely sophisticated lithium / calcium base grease which incorporates modern polymer technology. This advanced grease has a high level of water tolerance, mechanical stability and adherence. has exceptional load carrying ability and will cope with constant high levels of loads and shock loading. Its wide application temperature range makes
Morris Liquimatic 33G is recommended for use in all Ford automatic transmissions where a M2C 33G qualified product has been specified. Other transmission applications include Borg Warner, ITL (JCB) and certain Land Rover units.
Ultralife Red will protect all engines from frost damage right down to &ndash40oC (at 50% of total coolant volume). It also provides outstanding protection against rust and corrosion for all parts of the cooling system and is therefore recommended for all year round use. This Ethylene Glycol based antifreeze, which uses Organic Acid technology, is free from nitrites, amines, phosphates, borates and
Multivis ADT VA 5W-30 is a synthetic technology lubricant, designed for use in the latest technology engines, including those fitted with exhaust gas after-treatment devices.
Multilife VX 5W-30 is a fully synthetic advanced lubricant, designed for use in the latest technology engines, including those fitted with exhaust gas after-treatment devices. Multilife VX 5W-30 meets the requirements of VW Standards 504.00 and 507.00 and can be used in all of their current engine designs.
Morris XEP 80W-90 has been specifically designed for use in limited slip differentials requiring the following viscosity grades 80W-90, 85W-90 or 90 grade lubricants.
Morris Lodexol XFS 80W-140 is based on synthetic oil technology and will protect limited slip differentials fitted to high performance cars (including BMW, Morgan, TVR, Aston Martin) and motorsport models. Additionally this grade may be used in various other automotive, agricultural and heavy duty designs of limited slip differential or drive axle, where a SAE 80W/140, API GL5 lubricant is required.
Morris Liquimatic DS is designed for all General Motors applications requiring Dexron® VI and provides protection for 2006 models and newer. Transmissions include the following Aisin Warner models: AW TF-80SC / SD, AWF21, AF40-6, AM6, AW6A-EL, TF-81SC, AF21, GA6F21WA (Mini). Suitable for use in automatic transmissions fitted to hydrid electric vehicles.
Versimax HD4 15W-40 is a highly versatile heavy duty engine oil that can be used to rationalise inventories, due to its extensive performance profile.
K6 is a premium quality, water resistance grease for use in industrial and marine applications where the presence of water and humid atmospheres can effect lubricating performance and be detrimental to the protection of parts from corrosion. K6 is further enhanced with a special additive which provides additional protection and lubrication in areas where excessive levels of water are prevalent such
Workshop Pro Semi-synthetic Chain Lubricant is a specially formulated aerosol designed for the protection of chains used in a variety of applications.
Morris Lubricants - Golden Film Flushing Oil is a combination of highly refined light mineral oils and detergent/dispersant additives to enhance removal of sludge and lacquers. Flushing oil can be used where a system’s history is unknown or the service fill lubricant may have been used beyond its oil drain interval. This product can also be used if the service fill lubricant has to be drained because of a contamination
When applied to wet parts the chemistry of MD-4 has a powerful attraction to the underlying surfaces and this completely displaces traces of water. Therefore this product is particularly useful as an engine damp start. If the aerosol pack is used, a short spray on to the affected parts will displace any wetness and prevent voltage breakdown, allowing the engine to be started again normally. MD-4 is