Order Hotline: 01782 410381
Terrain LS 80W-90 has been specifically designed for use in limited slip differentials and wet brake systems fitted to off-highway and agricultural equipment. where differential loadings are high and where a variety of operating conditions may be encountered.
Terrain XL 10W-30 high performance heavy duty multigrade engine oil recommended for diesel units fitted to off-highway equipment operating under varying work loads. Terrain XL 10W-30 provides high levels of cleanliness, wear, rust and oxidation protection, together with outstanding soot handling and sludge dispersancy.
Terralus AIR-O-LUBE is a pale amber liquid derived from natural vegetable oils blended with performance enhancing additives. It has low toxicity and is readily biodegradable. Terralus AIR-O-LUBE is a specially balanced formulation for use through metered mist air equipment to ensure economical lubricant utilisation and eliminates fluid loss associated with flood coolants. It has a high affinity to metal surfaces giving superior adhesion and on contact, the airborne droplets cling to minimise back scatter.
This range is mineral oil free and has been specially developed to meet concern over the inevitable spills, leakages and total system losses that frequently occur from burst hoses on hard worked hydraulic equipment. This is particularly important if hydraulic equipment is working where soil or water contamination is a possibility. In addition to the problem of mineral oil pollution, there is now evidence
Terralus BVG Hydraulic Oils are a range of readily biodegradable hydraulic oils manufactured to meet the requirements of hydraulic systems in industrial, horticultural and earth moving equipment. This range is mineral oil free and has been specially developed to meet concern over the inevitable spills, leakages and total system losses that frequently occur from burst hoses on hard worked hydraulic
Terralus CBO oil is specially formulated to overcome the environmental concern, of long term potentially harmful ecological effects of mineral based oils in total loss systems, particularly in the agricultural, forestry, horticultural and water industries. The biodegradable products used in the formulation: -&bull Reduce wear on cutter bar chain and sprockets&bull Reduce build up of foam&bull Provide
Terralus SB46 is a fully synthetic biodegradable hydraulic oil that may be used in environmentally sensitive locations such as agricultural land, forest floor, ground near water courses and reservoirs and construction sites. Terralus SB46 is based on synthetic esters to reduce gumming and high temperature oxidation, while improving low temperature fluidity. The formulation also contains approved performance additives, to reduce corrosion, wear and extend equipment life.
Terralus UTTO is a biodegradable multi-functional tractor transmission fluid that can be used in transmissions, hydraulics, oil immersed (wet brakes), PTOs and final drive systems. The product has been carefully formulated from raw materials that have demonstrated a level of biodegradability that makes it an ideal candidate for use where environmental impact must be reduced to a minimum.
Terralus Viroclean is a non-toxic, water-based, biodegradable cleaner. The concentrate is mildly alkaline to aid dirt removal but contains no petroleum or chlorinated solvents.
Terza 7060 is a high quality low viscosity mould release oil containing solvent refined mineral oil, hydrocarbon solvent and lubricity additives. It has been specially produced for use in high rate production of fired clay and concrete building products. This is a low viscosity fluid, which after the evaporation of the solvent, dries to a tenacious oily film on the mould surface. The
Terza M-107 has been specially produced for use in high rate production of concrete roof tiles, on the type of machines where the moulds are continuously chain driven past the pouring hopper. This is a low viscosity fluid, which after the evaporation of the solvent, dries to a tenacious oily film on the mould surface. The low viscosity helps the film to flow and cover the mould surfaces, and spread
Morris Lubricants Transformer Oil is a highly refined naphthenic product for use solely in oil filled transformers and other electrical equipment. The base stock and refining process has been specifically chosen to produce a long life product free of oxidation and sludging tendencies.
Premium hydraulic oil - ISO VG 32 with excellent anti-wear properties and corrosion inhibition. Good anti-foam plus rapid air release prevents sponginess, ensuring a positive hydraulic response. Ideal for use in mobile plant.
Premium hydraulic oils - ISO VG 46, with excellent anti-wear properties and corrosion inhibition. Good anti-foam plus rapid air release prevents sponginess, ensuring a positive hydraulic response. Ideal for use in mobile plant.
Premium hydraulic oils - ISO VG 68, excellent anti-wear properties and corrosion inhibition. Good anti-foam plus rapid air release prevents sponginess, ensuring a positive hydraulic response. Ideal for use in mobile plant.
Morris Lubricants Ultralife 1 is suitable for the cooling systems of modern engines in passenger car, trucks, agricultural and contractors plant, where an OAT antifreeze is demanded by the following OEMs:
Morris Lubricants Ultralife 2 may be used with confidence in engines manufactured from cast iron, aluminium or combinations of the two metals, and in cooling systems made of aluminium or copper alloys. It is particularly recommended for use in Asian OEM’s, in line with their basic chemistryrequirements.
Morris Lubricants Ultralife 3 can be used in internal combustion engines (ICEs), hybrids and the indirect cooling systems of battery electric vehicles (BEVs) where any of the specifications listed are demanded by the equipment manufacturer.
Morris Ultralife 4 provides long-life protection against all forms of corrosion by the use of optimised and patented organic corrosion inhibitors. This product does not contain nitrates, nitrites, amines,
borates or silicates. Excellent and lasting high temperature corrosion protection is provided forthe aluminium heat transfer surfaces contained in modern engines. Furthermore, Ultralife 4 offersexcellent cavitation protection.
Ultralife HD is ethylene glycol based antifreeze, which uses Organic Acid Technology and is free from nitrites, amines, phosphates, borates and silicates.
Ultralife Red will protect all engines from frost damage right down to &ndash40oC (at 50% of total coolant volume). It also provides outstanding protection against rust and corrosion for all parts of the cooling system and is therefore recommended for all year round use. This Ethylene Glycol based antifreeze, which uses Organic Acid technology, is free from nitrites, amines, phosphates, borates and
Versimax HD11 5W-30 is a top tier heavy duty diesel specific engine oil that has been designed to meet the necessary chemical limits required to maintain the efficiency of exhaust aftertreatment devices
Versimax HD12 15W-40 is designed for use in Euro 5 / Euro 6, Interim Tier 4 / Stage 3B / Tier 4 and Stage 4 diesel engines
Morris Versimax HD14 10W-30 is designed for use in Euro 5 / Euro 6, Interim Tier 4 / Stage 3B / Tier 4 and Stage 4 diesel engines
Morris Lubricants Versimax® HD16 5W-30 has been developed for use in diesel engines fitted with exhaust gas re-circulation (EGR), selective catalytic reduction (SCR – Adblue) NOx reduction systems, diesel oxidation catalysts (DOC) and diesel particulate filters (DPF).
Versimax HD17 5W-30 is designed for use in diesel engines meeting Euro IV, V and VI emission requirements where an oil of this quality is specified.
Morris Lubricants Versimax HD18 5W-20 maximises fuel efficiency potential by producing a thin strong oil film whilst under load, which in turn reduces energy losses and CO2 output.
Versimax HD3 20W-50 has high levels of detergency /dispersancy to reduce combustion chamber deposits and ring sticking, as well as preventing excessive soot thickening. This grade will protect from wear, rust and corrosion.
Versimax HD4 15W-40 is a highly versatile heavy duty engine oil that can be used to rationalise inventories, due to its extensive performance profile.
Versimax HD5 10W-40 is formulated in semi synthetic base fluids, to improve cold start fluidity and circulation, while also protecting components under severe load, when running at high temperatures.
Versimax HD8 10W/40 is a low SAPS (Sulphated Ash, Phosphorus and Sulphur) synthetic heavy duty diesel specific engine oil. Manufactured from synthetic base fluids this product contains an advanced additive package formulated to provide protection when operating in very severe conditions with extended drain intervals. Versimax HD8 10W/40 meets the heavy duty truck requirements for Low Emission
Workshop PRO All Seasons Screen Wash is a specially formulated screen wash concentrate that is made for adding to water in vehicle washer bottles. It cuts through dirt and grime from roads and traffic leaving a clean and sparkling smear free windscreen. The special formulation helps wiper blades glide smoothly over the screen and eliminates annoying judder. Suitable for all year round use.
Workshop PRO Anti-Seize is a lead and CFC free compound, made from solvent refined oil, Bentonite thickener and fine copper powder. The product is highly recommended as a thread lubricant on the external parts of all racing motorcycles, where rapid and trouble free disassembly by pit crews is a competitive essential.
Morris Workshop Pro Citrus Hand Gel is a powerful heavy-duty hand cleanser containing non environment polluting micro-particles for the effective removal of ingrained dirt, grease and grime. Free from petroleum derived solvents but designed to outperform traditional solvent based hand cleansers.
Fully Synthetic Chain Lube - protects chains from wear and corrosion. Initialy a thin free-flowing lubricant when sprayed it penetrates into vital inner pins and bushes of the chain links where it cushions against shock loading.
When applied to wet parts the chemistry of MD-4 has a powerful attraction to the underlying surfaces and this completely displaces traces of water. Therefore this product is particularly useful as an engine damp start. If the aerosol pack is used, a short spray on to the affected parts will displace any wetness and prevent voltage breakdown, allowing the engine to be started again normally. MD-4 is
Workshop Pro Semi-synthetic Chain Lubricant is a specially formulated aerosol designed for the protection of chains used in a variety of applications.
A complex mixture of hydrocarbon and oxygenated solvents designed to clean and degrease all flat and irregular surfaces.
Workshop Pro Solvent Degreaser is a ready for use, pink coloured emulsifiable fluid, manufactured from a highly refined hydrocarbon solvent and a non-ionic surfactant. It was originally developed for rapid de-waxing of car bodies.
Workshop Pro Surface Conditioner is a special blend of silicone, solvents and cleaners. It has been designed as a multipurpose product that cleans, restores and protects surfaces at the same time.
Workshop ProTraffic Film Remover is a unique combination of surface active agents, sequestrants and alkaline builders with the following features. Effective at higher dilutions. Easily and gently removes road dirt and grime. Ideal for hot or cold pressure wash machines. Effective in hard and soft waters. Contains rinse off additive. Biodegradable. Dyed blue for product identification. Safe on paint work, metal surfaces, glass and rubber. Does not contain ingredients which accelerate metal corrosion.
Morris XEP 80W-90 has been specifically designed for use in limited slip differentials requiring the following viscosity grades 80W-90, 85W-90 or 90 grade lubricants.