Brand Selector

Workshop Pro Semi-synthetic Chain Lubricant is a specially formulated aerosol designed for the protection of chains used in a variety of applications.

Morris Lubricants - Golden Film Flushing Oil is a combination of highly refined light mineral oils and detergent/dispersant additives to enhance removal of sludge and lacquers. Flushing oil can be used where a system’s history is unknown or the service fill lubricant may have been used beyond its oil drain interval. This product can also be used if the service fill lubricant has to be drained because of a contamination

A high performance green mineral based brake and clutch, hydro-pneumatic suspension & hydraulic system oil. This grade is designed to protect against pump wear and provide good rates of flow throughout the system even in the most extreme temperatures. Should not be mixed with synthetic brake fluids.

When applied to wet parts the chemistry of MD-4 has a powerful attraction to the underlying surfaces and this completely displaces traces of water. Therefore this product is particularly useful as an engine damp start. If the aerosol pack is used, a short spray on to the affected parts will displace any wetness and prevent voltage breakdown, allowing the engine to be started again normally. MD-4 is

A solvent deposited, general purpose medium to long term rust preventative with water displacing properties. On drying, a thin grease film provides long term indoor protection or medium to long term outdoor protection dependent upon storage conditions. Application, preferably by dipping but spraying or brushing may also be employed. Removal is by hydrocarbon solvent or by use of a suitable alkaline

High viscosity index hydraulic oil, formulated from high quality minerals oils and the latest anti-wear technology. Ideal for hydraulic systems subjected to the very extremes of operating conditions and temperatures, from frozen food stores (-20oC) to industrial hydraulic systems at elevated temperatures and off highway equipment.Recommended for both Industrial and off highway hydraulic systems, where

High viscosity index hydraulic oil, formulated from high quality minerals oils and the latest anti-wear technology. Ideal for hydraulic systems subjected to the very extremes of operating conditions and temperatures, from frozen food stores (-20oC) to industrial hydraulic systems at elevated temperatures and off highway equipment.Recommended for both Industrial and off highway hydraulic systems, where

Specially selected base oils and additives ensure a low misting potential in use, whilst also ensuring excellent flushing of honing stones and excellent swarf separation. Marcia H may also be utilised in a number of  light to medium duty applications involving free cutting ferrous alloys.

S-3403 is a special synthetic chain lubricant specifically designed and manufactured for use in high temperatures and other adverse conditions where conventional lubricants would fail.  It is a blend of polyisobutylene, esters and performance enhancing additives that have excellent thermal stability at elevated temperatures.

Supergrind SW is a fully synthetic water-mix grinding fluid that forms a true solution when diluted with water. Supergrind SW is formulated to have a very low foaming tendency, even when used with soft water. 

Premium hydraulic oils - ISO VG 46, with excellent anti-wear properties and corrosion inhibition. Good anti-foam plus rapid air release prevents sponginess, ensuring a positive hydraulic response. Ideal for use in mobile plant.

Premium hydraulic oils - ISO VG 68, excellent anti-wear properties and corrosion inhibition. Good anti-foam plus rapid air release prevents sponginess, ensuring a positive hydraulic response. Ideal for use in mobile plant.

This range is mineral oil free and has been specially developed to meet concern over the inevitable spills, leakages and total system losses that frequently occur from burst hoses on hard worked hydraulic equipment. This is particularly important if hydraulic equipment is working where soil or water contamination is a possibility. In addition to the problem of mineral oil pollution, there is now evidence

This range is mineral oil free and has been specially developed to meet concern over the inevitable spills, leakages and total system losses that frequently occur from burst hoses on hard worked hydraulic equipment. This is particularly important if hydraulic equipment is working where soil or water contamination is a possibility. In addition to the problem of mineral oil pollution, there is now evidence

Terralus BVG Hydraulic Oils are a range of readily biodegradable hydraulic oils manufactured to meet the requirements of hydraulic systems in industrial, horticultural and earth moving equipment. This range is mineral oil free and has been specially developed to meet concern over the inevitable spills, leakages and total system losses that frequently occur from burst hoses on hard worked hydraulic

K3 is a premium quality, water resistant grease for use in industrial and marine applications where the presence of water and humid atmospheres can effect lubricating performance and be detrimental to the protection of parts from corrosion. K3 is further enhanced with a special additive which provides additional protection and lubrication in areas where excessive levels of water are prevalent such

The Terrain CT range is formulated with high quality mineral oils and additives designed to provide the correct frictional characteristics required by Caterpillar in transmission and hydraulic systems. The additive system also gives this oil improved temperature performance, superior resistance to oxidation, rust, corrosion and improved anti-foam properties. In addition these grades have excellent

The Terrain CT range is formulated with high quality mineral oils and additives designed to provide the correct frictional characteristics required by Caterpillar in transmission and hydraulic systems. The additive system also gives this oil improved temperature performance, superior resistance to oxidation, rust, corrosion and improved anti-foam properties. In addition these grades have excellent

The Terrain CT range is formulated with high quality mineral oils and additives designed to provide the correct frictional characteristics required by Caterpillar in transmission and hydraulic systems. The additive system also gives this oil improved temperature performance, superior resistance to oxidation, rust, corrosion and improved anti-foam properties. In addition these grades have excellent

Terralus CBO oil is specially formulated to overcome the environmental concern, of long term potentially harmful ecological effects of mineral based oils in total loss systems, particularly in the agricultural, forestry, horticultural and water industries. The biodegradable products used in the formulation: -&bull Reduce wear on cutter bar chain and sprockets&bull Reduce build up of foam&bull Provide

This semi fluid, soft lithium based greases has been specially designed for use in centralised lubrication systems. It is easily pumped, has superb oxidation resistance, exceptional mechanical stability, good water resistance and rust protection and can be used over a wide range of operating temperatures.It conforms to all leading bearing manufacturers specifications for general purpose

Agrimax® HY is a hydraulic/transmission fluid formulated with high quality mineral oils and specialised additives for use in agricultural and plant equipment, where the Case MS1207/1209 specifications are called for.

Terralus SB46 is a fully synthetic biodegradable hydraulic oil that may be used in environmentally sensitive locations such as agricultural land, forest floor, ground near water courses and reservoirs and construction sites. Terralus SB46 is based on synthetic esters to reduce gumming and high temperature oxidation, while improving low temperature fluidity. The formulation also contains approved performance additives, to reduce corrosion, wear and extend equipment life.

K6 is a premium quality, water resistance grease for use in industrial and marine applications where the presence of water and humid atmospheres can effect lubricating performance and be detrimental to the protection of parts from corrosion. K6 is further enhanced with a special additive which provides additional protection and lubrication in areas where excessive levels of water are prevalent such

Versimax HD8 10W/40 is a low SAPS (Sulphated Ash, Phosphorus and Sulphur) synthetic heavy duty diesel specific engine oil. Manufactured from synthetic base fluids this product contains an advanced additive package formulated to provide protection when operating in very severe conditions with extended drain intervals. Versimax HD8 10W/40 meets the heavy duty truck requirements for Low Emission

Versimax HD4 15W-40 is a highly versatile heavy duty engine oil that can be used to rationalise inventories, due to its extensive performance profile.

Terralus UTTO is a biodegradable multi-functional tractor transmission fluid that can be used in transmissions, hydraulics, oil immersed (wet brakes), PTOs and final drive systems. The product has been carefully formulated from raw materials that have demonstrated a level of biodegradability that makes it an ideal candidate for use where environmental impact must be reduced to a minimum.

Terrain XL 10W-30 high performance heavy duty multigrade engine oil recommended for diesel units fitted to off-highway equipment operating under varying work loads. Terrain XL 10W-30 provides high levels of cleanliness, wear, rust and oxidation protection, together with outstanding soot handling and sludge dispersancy.

Airforce EP22 is a premium quality, low viscosity airline oil, specifically designed for the lubrication of air tools. It has a low pour point and special additives to protect against rust, corrosion and water washing. This grade also has excellent anti-wear and EP properties, providing component protection in the most demanding of systems. Airforce EP22 contains a vital antifogging agent to maintain

Specially formulated range of ashless compressor oils for the lubrication of both reciprocating and rotary air compressors.

Specially formulated range of ashless compressor oils for the lubrication of both reciprocating and rotary air compressors.

Specially formulated range of ashless compressor oils for the lubrication of both reciprocating and rotary air compressors.

Golden Film AG Gear Oils are a range of mineral oil based lubricants, formulated without extreme pressure (EP) additives. These oils have good natural film strength, anti-foam performance and long term stability.

Golden Film AG Gear Oils are a range of mineral oil based lubricants, formulated without extreme pressure (EP) additives. These oils have good natural film strength, anti-foam performance and long term stability.

Specially formulated ‘2000 hour’ fluid developed to meet the requirements of hydrovane compressors and other similar vane compressors, ensuring long, trouble-free compressor life, wherever a fluid of this viscosity is recommended by the manufacturer.

A solvent deposited, medium term rust preventative with water displacing properties providing a thin grease film when dry. Ankor C has good operator acceptability due to its low odour and ease of application by dipping, brushing or spraying

Universal Anti-freeze will protect all engines from frost damage right down to -34oC and ice damage down to -50oC (at 50% of total coolant volume). It also provides outstanding protection against rust and corrosion for all parts of the cooling system and is therefore recommended for all year round use. This Ethylene Glycol based antifreeze, which meets the technical requirements of BS6580

Terralus AIR-O-LUBE is a pale amber liquid derived from natural vegetable oils blended with performance enhancing additives. It has low toxicity and is readily biodegradable. Terralus AIR-O-LUBE is a specially balanced formulation for use through metered mist air equipment to ensure economical lubricant utilisation and eliminates fluid loss associated with flood coolants. It has a high affinity to metal surfaces giving superior adhesion and on contact, the airborne droplets cling to minimise back scatter.

Aqua Max 2 is approved by the NMMA to TC-W3&trade and has been developed to meet the need for a specialised ash free outboard motor oil for today’s high powered multi-cylinder two cycle engines. The ashless formulation provides an excellent lubricating film that leads to improved engine performance and reduced wear for engine components even if temporary overheating occurs. Aqua Max 2 provides

The use of Morris Golden Film running-in oil during the running in period helps to remove the machining glaze from cylinder bores, assists the formation of essential oil retaining surfaces, and therefore prevents the possibility of bore polishing.

A lead free anti seize compound, made from high quality mineral oils, bentonite (clay) thickener and fine copper powder. Anti-seize properties enable this grease to work even if the joints become so compressed that most of the compound is squeezed out, or excessive temperature flashes off the oily part of the compound. A fine film of copper particles always remain in joints or threads to prevent seizure

Specially formulated ‘2000 hour’ fluid developed to meet the requirements of hydrovane compressors and other similar vane compressors, ensuring long, trouble-free compressor life, wherever a fluid of this viscosity is recommended by the manufacturer.

Workshop ProTraffic Film Remover is a unique combination of surface active agents, sequestrants and alkaline builders with the following features. Effective at higher dilutions. Easily and gently removes road dirt and grime. Ideal for hot or cold pressure wash machines. Effective in hard and soft waters. Contains rinse off additive. Biodegradable. Dyed blue for product identification. Safe on paint work, metal surfaces, glass and rubber. Does not contain ingredients which accelerate metal corrosion.

Morris Lubricants Marine SAE 10W-40 is a high quality, multigrade engine oil designed for use in canal boats

Compound Steam Cylinder Oils 460, are for use in most Locomotives and Stationary engines working with either saturated or superheated steam.

Morris Multivis MLR 10W-50 is recommended for all turbo-charged and naturally aspirated petrol and diesel engines, for ordinary road use and also for car racing, endurance events, rallying and all other types of motor sport.

Groundforce Croma 30 Cutter Bar Oil is designed to meet all lumber industry, forestry, woodyard and estate management requirements. Provides excellent corrosion protection and improved chain performance in a wide range of climatic conditions.