Order Hotline: 01782 410381
Morris Multivis ECO FB 5W-20 is recommended for use where manufacturers specify an SAE 5W-20 complying with one of the following performancelevels. Ford WSS-M2C948-B, API SP, ACEA C5
Morris Multivis CST SS 10W-40 is a semi-synthetic engine oil manufactured from advanced Group II and Group III base fluids and the latest additive technology.
Multivis CST HP 5W-40 is a fully synthetic engine oil developed directly from motor racing technology and formulated for use in the latest passenger car and van engine designs. It has proved to be far superior to conventional oils and provides the following advantages:
Multivis 5W-30 is a semi-synthetic multigrade engine oil specially formulated to meet the superior performance and fuel efficiency requirements of modern engines requiring low viscosity oils. Enhanced oil flow and film strength give essential protection during start-up. Advanced additive technology provides long-term benefits including reduced wear on critical valve-train components in modern multi
Multilife VX 5W-30 is a fully synthetic advanced lubricant, designed for use in the latest technology engines, including those fitted with exhaust gas after-treatment devices. Multilife VX 5W-30 meets the requirements of VW Standards 504.00 and 507.00 and can be used in all of their current engine designs.
Multivis ADT VA 5W-30 is a synthetic technology lubricant, designed for use in the latest technology engines, including those fitted with exhaust gas after-treatment devices.
Multivis ADT RN 5W-30 has been specifically formulated to cope with the demands of Renault vehicles produced after 2018 and fitted with their latest gasoline and diesel engines. This product also covers the requirements of older units where RN0700 and RN7
Multivis ADT DV 5W-30 has been developed to help combat the issue of Low Speed Pre-ignition (LSPI) which can cause damage to certain petrol engine types.
Morris Multivis ADT C3 5W-40 is a mid-SAPS synthetic technology engine oil formulated to meet the
demands and fuel efficiency expectations of the latest petrol and diesel engines, where a lowviscosity oil is required.
Morris Lubricants - Multivis ADT C2 5W-30 is a mid-SAPS synthetic based multigrade engine oil formulated to meet the superior performance and fuel efficiency requirements of engines requiring low viscosity oils for gasoline and diesel engine applications.
Morris Multivis ADT C-ONE 5W-30 is a low-SAPS (Sulphur, Ash, Phosphorus) fully synthetic multigrade engine oil specially formulated to meet the superior performance and fuel efficiency requirements of modern engines requiring low viscosity oils for gasoline and diesel engine applications. Multilife C-ONE 5W-30 has been formulated to protect sensitive exhaust after-treatment devices.
Multitrans VTS is recommended for use in the automatic transmissions of commercial vehicles, buses, coaches, off-highway / construction equipment and passenger cars. The product may also be used in certain hydraulic applications, where a fluid of this type and specification is required.
Multitrans SA 75W-140 is designed and recommended for use in heavy duty axle / differential applications including Scania units requiring a lubricants with a STO 2:0A qualification.
Multitrans MTS 75W-90 gear oil is designed and recommended for use in non-syncronised manual gearboxes, differentials and final drives, where a SAE 75W-90, complying with one of the following performance levels, is specified. API GL-5, API MT-1, SAE J2360, Scania STO 1:0, MIL-PRF-2105E.
Morris Multitrans MPC is a high performance, synthetic technology based transmission fluid, designed to provide rationalization opportunities without compromising performance.
Multitrans DCT is a premium multi-vehicle DCT fluid, formulated to provide the required levels of component protection and friction control, critical to the operational efficiency and longevity of dual clutch designs.
Morris Multitrans CVT is a high performance transmission fluid, designed for use in a wide variety of pushbelt type Continuously Variable Transmissions (CVTs), including Jatco and Aisin systems.
Multi-System Central Hydraulic Fluid is an advanced synthetic formulation for use in applications and vehicle systems that require the use of CHF 11S and CHF 202 fluids, both of which are registered trade marks of Deutsche Pentosin-Werke GmbH. This product may also be used in all applications that require the use of LHM Plus fluid.
Milking Machine Vacuum Pump Oil is a high quality vacuum pump oil specially developed for use in milking machines. This oil is formulated from specially selected highly refined mineral oils. Milking machine reliability is of the utmost importance in dairy management and therefore this product has been designed with the following outstanding features.
Universal Anti-freeze will protect all engines from frost damage right down to -34oC and ice damage down to -50oC (at 50% of total coolant volume). It also provides outstanding protection against rust and corrosion for all parts of the cooling system and is therefore recommended for all year round use. This Ethylene Glycol based antifreeze, which meets the technical requirements of BS6580
Morris Lubricants Marine SAE 10W-40 is a high quality, multigrade engine oil designed for use in canal boats
Contains high levels of extreme pressure and lubricity additives thereby making it suitable for many arduous applications on hardened ferrous metals, high alloy steels and stainless. Despite its high EP loading Marcia T is a light coloured, low odour product, and hence has better operator acceptability than traditional products based on sulphurised fats.The high levels of EP and lubricity additives
Developed specifically for steam engines operating on the national rail network where true superheat conditions are experienced on long hauls