Morris Lubricants

Premium hydraulic oils - ISO VG 68, excellent anti-wear properties and corrosion inhibition. Good anti-foam plus rapid air release prevents sponginess, ensuring a positive hydraulic response. Ideal for use in mobile plant.

Morris Liquimatic 33G is recommended for use in all Ford automatic transmissions where a M2C 33G qualified product has been specified. Other transmission applications include Borg Warner, ITL (JCB) and certain Land Rover units.

Terralus UTTO is a biodegradable multi-functional tractor transmission fluid that can be used in transmissions, hydraulics, oil immersed (wet brakes), PTOs and final drive systems. The product has been carefully formulated from raw materials that have demonstrated a level of biodegradability that makes it an ideal candidate for use where environmental impact must be reduced to a minimum.

Terrain XL 10W-30 high performance heavy duty multigrade engine oil recommended for diesel units fitted to off-highway equipment operating under varying work loads. Terrain XL 10W-30 provides high levels of cleanliness, wear, rust and oxidation protection, together with outstanding soot handling and sludge dispersancy.

Terza M-107 has been specially produced for use in high rate production of concrete roof tiles, on the type of machines where the moulds are continuously chain driven past the pouring hopper.  This is a low viscosity fluid, which after the evaporation of the solvent, dries to a tenacious oily film on the mould surface.  The low viscosity helps the film to flow and cover the mould surfaces, and spread

Ultralife Red will protect all engines from frost damage right down to &ndash40oC (at 50% of total coolant volume). It also provides outstanding protection against rust and corrosion for all parts of the cooling system and is therefore recommended for all year round use. This Ethylene Glycol based antifreeze, which uses Organic Acid technology, is free from nitrites, amines, phosphates, borates and

Advanced mineral oil based gear oil providing total driveline protection in gearboxes and differentials. Meets the following specifications:

Morris Agrimax® UTTO 10W-40 has been designed to cover the majority of agricultural lubrication requirements, whilst maintaining a reduced inventory. This grade is formulated with the latest additive technology and high quality mineral oils to produce a universal lubricant for tractors, combines and agricultural machinery subjected to the severest of operating conditions.

Liquimatic VG5 is a low viscosity hydraulic oil blended from high quality mineral oils and a balanced additive system. It possesses excellent lubricating properties, with reduced oil mist and demulsification performance.

Terralus Viroclean is a non-toxic, water-based, biodegradable cleaner. The concentrate is mildly alkaline to aid dirt removal but contains no petroleum or chlorinated solvents.

Multivis ADT VA 5W-30 is a synthetic technology lubricant, designed for use in the latest technology engines, including those fitted with exhaust gas after-treatment devices.

Milking Machine Vacuum Pump Oil is a high quality vacuum pump oil specially developed for use in milking machines. This oil is formulated from specially selected highly refined mineral oils. Milking machine reliability is of the utmost importance in dairy management and therefore this product has been designed with the following outstanding features.

Morris Lubricant Race V-Twin 20W-50 meets the requirements of high performance motorcycles such as BMW, Harley Davidson, Triumph and certain Yamaha models that specify an SAE 20W/50 viscosity engine oil. 

Multilife VX 5W-30 is a fully synthetic advanced lubricant, designed for use in the latest technology engines, including those fitted with exhaust gas after-treatment devices. Multilife VX 5W-30 meets the requirements of VW Standards 504.00 and 507.00 and can be used in all of their current engine designs.

A solvent deposited, general purpose medium to long term rust preventative with water displacing properties. On drying, a thin grease film provides long term indoor protection or medium to long term outdoor protection dependent upon storage conditions. Application, preferably by dipping but spraying or brushing may also be employed. Removal is by hydrocarbon solvent or by use of a suitable alkaline

K6 is a premium quality, water resistance grease for use in industrial and marine applications where the presence of water and humid atmospheres can effect lubricating performance and be detrimental to the protection of parts from corrosion. K6 is further enhanced with a special additive which provides additional protection and lubrication in areas where excessive levels of water are prevalent such

Morris XEP 80W-90 has been specifically designed for use in limited slip differentials requiring the following viscosity grades 80W-90, 85W-90 or 90 grade lubricants.

Morris Lodexol XFS 80W-140 is based on synthetic oil technology and will protect limited slip differentials fitted to high performance cars (including BMW, Morgan, TVR, Aston Martin) and motorsport models. Additionally this grade may be used in various other automotive, agricultural and heavy duty designs of limited slip differential or drive axle, where a SAE 80W/140, API GL5 lubricant is required.

Versimax HD5 10W-40 is formulated in semi synthetic base fluids, to improve cold start fluidity and circulation, while also protecting components under severe load, when running at high temperatures.

A range of fully synthetic gear oils, manufactured from polyalkylene glycol (PAG) fluids and specialised extreme pressure (EP) additives, to provide outstanding protection at all temperatures to industrial gear systems. Unlike conventional gear oils PAG fluids maintain an effective lubricating film over a wide operating temperature range, from artic conditions to high thermal loadings.

Developed specifically for steam engines operating on the national rail network where true superheat conditions are experienced on long hauls

Morris Multitrans MPC is a high performance, synthetic technology based transmission fluid, designed to provide rationalization opportunities without compromising performance.

Morris Lodexol MTF 75W-80 has exceptionally good high temperature stability ensuring maximum gear set protection, even under prolonged arduous operation.

Morris Liquimatic DS is designed for all General Motors applications requiring Dexron® VI and provides protection for 2006 models and newer. Transmissions include the following Aisin Warner models: AW TF-80SC / SD, AWF21, AF40-6, AM6, AW6A-EL, TF-81SC, AF21, GA6F21WA (Mini). Suitable for use in automatic transmissions fitted to hydrid electric vehicles.

Multivis MLR 10W-60 is recommended for all turbo-charged and naturally aspirated petrol and diesel engines, for ordinary road use and also for car racing, endurance events, rallying and all other types of motor sport.

Multitrans DCT is a premium multi-vehicle DCT fluid, formulated to provide the required levels of component protection and friction control, critical to the operational efficiency and longevity of dual clutch designs.

Morris Multitrans CVT is a high performance transmission fluid, designed for use in a wide variety of pushbelt type Continuously Variable Transmissions (CVTs), including Jatco and Aisin systems.

Recommended for both Industrial and off highway hydraulic systems, where extreme operating conditions are encountered. Can also be used in hydrostatic drives, power steering systems, brake systems and other applications where products of this type and specification required.

SUPERCUT 3000 is a micro-emulsion metalworking fluid that is readily miscible with most mains water producing a transparent blue emulsion that is suited to a wide variety of applications.

Multivis ECO-S 0W/20 is a high performance fully synthetic engine oil formulated to cope with the exacting demands of OEMs requiring low viscosity engine oils.

Description

K968 is a premium quality, water resistant grease for use in food processing environments where incidental food contact may occur.

Multivis V 0W-20 is a low viscosity engine oil providing not only the potential for fuel savings, but a high level of component protection under a wide range of operating conditions in passenger cars

Morris Lodexol XFS 75W-90 is based on synthetic oil technology and will protect limited slip differentials fitted to high performance cars and motorsport models. Additionally this grade may be used in various other automotive drive axles, where a SAE 75W/90, API GL5 lubricant is required.

Morris Race Gear Oil has an extremely low fluid friction and does not rob power at start up or during racing. Recommended for use in all types of racing and competition gearboxes, where a SAE 75W-90 or SAE 10W-40 is specified.

Workshop Pro White Spray Grease is a combination of a Calcium and Zinc based grease in an aerosol form offering good resistance to water and heat. The product also offers long lasting protection against corrosion.

Morris Multivis ECO FB 5W-20 is recommended for use where manufacturers specify an SAE 5W-20 complying with one of the following performance
levels. Ford WSS-M2C948-B, API SP, ACEA C5

This product is the only acceptable transmission fluid for NAG2V Sport transmissions and the 7GTronic models: W7A 700 / NAG2. Additional applications include 5-speed models that employ a
controlled torque converter lockup clutch for rear-wheel drive vehicles, which are also fitted in certain
Chrysler models. These model designations are: 722.6 / W5A 580 / NAG1.

Multivis ECO H 0W-16 is a high performance synthetic engine oil formulated to cope with the exacting
demands of OEMs requiring low viscosity engine oils. 

Manufacturers include Honda, Toyota, Mitsubishi, Nissan and Suzuki (Baleno (A1K412 SHVS), Ignis (ATK412 & ATK412 SHVS), Swift (A2LL412 & A2L412 SHVS)).

Multivis ECO V 0W-30 is an engine oil providing not only the potential for fuel savings but a high level of component protection under a wide range of operating conditions in passenger cars or light commercial vehicles.

Faracut HS3 is a highly refined cutting oil with special lubricity additives to enhance cutting without the use of Chlorine, Sulphur or Phosphorus

Multivis ECO PC 0W-30 is a new generation passenger car engine oil formulated and developed for the latest PSA petrol and diesel engines, including hybrids

Lodexol MTFE 75W is a high performance, fully synthetic gear oil formulated and optimised for use in automotive gearboxes requiring a low viscosity SAE 75W. Lodexol MTFE 75W will provide potential fuel saving performance due to its low viscosity, which minimises friction in the gearbox. 

Multivis ECO VB 0W-20 is a high performance fully synthetic engine oil formulated to cope with the exacting demands of OEMs requiring low viscosity engine oils, in particular Volkswagen Audi Group.

Magnol HVI46 High Viscosity Index Oil is recommended for both Industrial and off highway hydraulic systems, where extreme operating conditions are encountered. Can also be used in hydrostatic drives, power steering systems, brake systems and other applications where products of this type and specification required.

Versimax HD11 5W-30 is a top tier heavy duty diesel specific engine oil that has been designed to meet the necessary chemical limits required to maintain the efficiency of exhaust aftertreatment devices

Multitrans VTS is recommended for use in the automatic transmissions of commercial vehicles, buses, coaches, off-highway / construction equipment and passenger cars. The product may also be used in certain hydraulic applications, where a fluid of this type and specification is required. 

Morris Versimax HD14 10W-30 is designed for use in Euro 5 / Euro 6, Interim Tier 4 / Stage 3B / Tier 4 and Stage 4 diesel engines

Versimax HD12 15W-40 is designed for use in Euro 5 / Euro 6, Interim Tier 4 / Stage 3B / Tier 4 and Stage 4 diesel engines

Morris K65 is an industrial, extreme temperature, medium consistency plain and rolling bearing grease for applications at operating temperatures up to 600°C.

Typical applications include: kiln car bearings, furnace doors, drying tunnel mechanisms and other applications where high temperatures are encountered.

Morris Airforce VPO HV is recommended for use in a wide range of positive displacement vacuum pumps, including rotary vane, lobe, screw and reciprocating designs.

Morris Golden Film 10W-40 is suitable for use in passenger cars and light commercial vehicles, that may have originally specified a 10W-40 or where engines have been rebuilt or restored.

Multivis ECO PV 0W-20 is a low viscosity passenger car engine oil that provides advanced fuel economy performance coupled with outstanding wear protection and cleanliness under a wide variety of driving conditions.

Crystal White Oils are highly refined medicinal grades, that are water white in colour, odourless and tasteless. These products are extremely stable and will not break down or form sludges. Category Code: H1, HX-1, 3H

Morris Heavy Liquid Paraffin is a highly refined medicinal white oil grade that is water white in colour, odourless and tasteless. This product is extremely stable and will not break down or form sludges.

K90 Calcium Sulphonate Complex Grease has been developed as a high performance grease for construction
plant such as bulldozers, scrapers, loading shovels and dump trucks where it will give outstanding performance.
It is also recommended for use in industrial equipment operating at high temperatures or exposed to salt water.