Industrial

Specially selected base oils and additives ensure a low misting potential in use, whilst also ensuring excellent flushing of honing stones and excellent swarf separation. Marcia H may also be utilised in a number of  light to medium duty applications involving free cutting ferrous alloys.

A high performance neat cutting oil specifically developed for use on severe applications.

A translucent green, biostable, micro-emulsion metalworking fluid that offers excellent workpiece visibility and extended sump life. It is non-staining to ferrous and non-ferrous materials which enables it to be used on a wide variety of metals from medium tensile and high carbon steels to cuprous alloys and cast iron. It is particularly suited to modern CNC machning centres. Premiercut GP is ideal

A nitrite-free, mineral oil free grinding fluid incorporating the latest biostable technology.

TDR Paste: A waxy paste usually applied by dipping the tool into the product.  

A viscous liquid usually applied by the use of squeeze or dripping bottle.

Forms a good stable milky emulsion, even in hard waters up to 400 ppm Ca CO3 hardness. Good inhibition against corrosion of a wide range of ferrous metals, giving protection to workpiece and machine parts. Also good resistance to contact corrosion, so workpieces may be stacked without staining taking place. Low staining potential on many non-ferrous metals including copper and its alloys

A biostable, semi-synthetic cutting fluid designed for use in applications where extra lubricity and extreme pressure properties are required, such as: Sawing of aluminium and aerospace alloys. Broaching. Screw cutting of alloy steels. Deep hole boring. Spray applied gun drilling Forming.

Hard metals such as tungsten carbide contain significant amounts of Cobalt in their make-up. It has been shown* that if released into the work place, Cobalt poses a health hazard to machine operators. If conventional synthetic grinding fluids are used to grind carbides, Cobalt is automatically released into the fluid and builds up to harmful levels. A specialist product is therefore required to prevent

Morris Supergrind MP is part of the new generation of grinding fluids which are nitrite, mineral oil,
sulphur, chlorine and phenol free, and having excellent resistance to attack by moulds and
bacteria, resulting in extended odour free sump life.  

Materials: Ferrous and non-ferrous, tool steels, engineering and ceramics.

Supergrind Plus is a fully synthetic grinding fluid offering exceptional performance and extended sump life in most grinding operations. It is formulated using the latest technology and offers excellent corrosion protection, stable solutions, low foaming tendency, excellent fines separation and resistance to degradation by bacteria or fungi. The synthetic formulation also alleviates wheel glazing

Supergrind SW is a fully synthetic water-mix grinding fluid that forms a true solution when diluted with water. Supergrind SW is formulated to have a very low foaming tendency, even when used with soft water. 

Supercut 8000 Ester Fortified, semi-synthetic, micro emulsion for heavy duty machining applications on difficult and sensitive alloys. Multi-metal compatibility, high tolerance to tramp oil and excellent surface finishes on many different alloys.
Stain free performance on steels, brasses and aerospace grade aluminium alloys.

Morris Supercut G is an Ester fortified, semi-synthetic micro-emulsion cutting fluid

incorporating the latest in performance additive technology. Supercut G has a high oil
content & chlorine free extreme pressure additives to ensure a high degree of lubricity and excellent machining performance.
Supercut G has been developed specifically for use with the more difficult to machine alloys
and aluminium. It is, therefore, an excellent product for workshop rationalisation and is
particularly suited to modern CNC machining centres.

Morris Supergrind Ultra is a premium quality versatile fully synthetic clear grinding fluid that is

free from nitrites, phenols, sulphur and chlorinated additives. It is recommended for the following operations & materials. 

machining.
Materials: High carbon steel, stainless steel, non-ferrous alloys, non-metals composites and
glasses. 

Supercut 4000 is a semi-synthetic, micro-emulsion metalworking fluid, readily miscible

with most mains water to produce a translucent green emulsion that is suited to a wide
variety of applications, non-staining to ferrous and non-ferrous materials which enables it to be

used on a wide variety of alloys.

Morris Supercut 6000 excellent lubricity handles slow speed and high-pressure operations, whilst its superior level of Extreme Pressure additives permits the use of high-speed CNC machining of tough alloys

Morris Supercut 1000 is readily miscible with most mains water to form a stable, rich, milky white

emulsion of low odour and good corrosion protection and is designed to give improved sump life
over competitive traditional milky soluble oils.

Clean Lubricant for the release of seized and rusted components

Contains extreme pressure additives to reduce tool wear and improve machined finish

Provides a tenacious lubricant film to exposed gears and wire ropes

Effective non-silicone mould release up to 200°C

Non staining, extreme pressure grease for high load applications

Anti-fling extreme pressure water resistant lubricant

High temperature anti-seize protection up to 1100°C

High temperature anti-seize protection up to 800°C

Fast evaporating non-corroding electrical cleaner

Dry PTFE based lubricant for quick and clean assembly and dismantling

Durable zinc protector and primer

Durable coating for sealing and protecting

Non-abrasive cleaner and degreaser

Workshop Pro White Spray Grease is a combination of a Calcium and Zinc based grease in an aerosol form offering good resistance to water and heat. The product also offers long lasting protection against corrosion.

Premier Ease Release Oil is specially blended, highly versatile, quality neat oil with surfactant which is ideal for use on metal, timber, other formwork materials and coatings

Faracut HS3 is a highly refined cutting oil with special lubricity additives to enhance cutting without the use of Chlorine, Sulphur or Phosphorus

Hard smooth non-porous grease with good resistance to oxidation. Formulated from a soap thickened mineral oil Premier Block Grease exhibits only slight changes in consistency at elevated temperatures.           

A low oil content semi-synthetic cutting fluid, incorporating the latest in formaldehyde and boron-free technology.

Crystal White Oils are highly refined medicinal grades, that are water white in colour, odourless and tasteless. These products are extremely stable and will not break down or form sludges. Category Code: H1, HX-1, 3H

Morris Heavy Liquid Paraffin is a highly refined medicinal white oil grade that is water white in colour, odourless and tasteless. This product is extremely stable and will not break down or form sludges.

TYGRIS Stripeline Marking Paint Blue is a solvent based paint used for applying semi-permanent markings to most hard surfaces, inside or outside. Used inverted with a handheld or wheeled applicator, this paint is rapid drying and has good resistance to abrasion and chemicals. Available in 7 colours for safety and legal purposes.

TYGRIS Stripeline Marking Paint White is a solvent based paint used for applying semi-permanent markings to most hard surfaces, inside or outside. Used inverted with a handheld or wheeled applicator, this paint is rapid drying and has good resistance to abrasion and chemicals. Available in 7 colours for safety and legal purposes.

TYGRIS Anti-Static Foaming Cleaner is designed for use around the workplace where the build up of dust is undesirable, its anti static properties dissipating static electrical charges effectively. For use on all water resistant, non porous surfaces, the foaming action aids in clinging to vertical surfaces.