Order Hotline: 01782 410381
Specifically designed for the lubrication of Traction Motor gears commonly found on Diesel-Electriclocomotives operating on the rail networks and heritage lines.
Morris Lubricants Multivis ECO PC 0W-20 has been primarily formulated for use in PSA DV5Rx; EP6LTD; EB2FA & LTD; EB2ADTx e-HDI and Puretech stop-start engines, fitted after February 2023.
500cc oil suction pump with 290mm PVC tube.
For lubricant suction and discharge for loading or refilling transmissions, gear boxes, filters, etc.
Morris Lubricants Multivis ECO FE 0W-20 is a low viscosity, high performance engine oil that has been formulated primarily for use in Ford’s 1.5L EcoBlue turbodiesel units.
Multivis ECO FE 0W-20 is recommended for passenger car engines, including turbo-charged and
supercharged versions, requiring a low viscosity grade.
Mobile unit to dispense viscous lubricants.
LOCOMAX 20W-40 R has been specifically formulated for the older diesel locomotive where the use of Zinc Free additives was not a prerequisite of the engine builders.
Waste Oil Gravity Collection Unit with Pump Discharge
Morris Locomax ZF 20W-40 ZF is blended to comply with the performance levels specified by the
Locomotive Maintenance Officers Association (LMOA) for Generations 4, 5 and 6. It also fulfilsthe requirements of API CF.
Largo Mineral Oils are a versatile range of oils which can be used wherever a straight mineral oil has been specified. Particularly recommended for lightly loaded industrial equipment with circulating systems, oil baths, automatic lubricators, wick oilers, spray, splash and mist lubricators
TYGRIS Stripeline Marking Paint White is a solvent based paint used for applying semi-permanent markings to most hard surfaces, inside or outside. Used inverted with a handheld or wheeled applicator, this paint is rapid drying and has good resistance to abrasion and chemicals. Available in 7 colours for safety and legal purposes.
Graphited lubricating oil for kiln for car bearings and other kiln components
Morris Lubricants Ultralife 3 can be used in internal combustion engines (ICEs), hybrids and the indirect cooling systems of battery electric vehicles (BEVs) where any of the specifications listed are demanded by the equipment manufacturer.
FSW Grease is a high quality, all round performing, white food machinery grease.
Fluid Measure with Flexible Spout
Morris Ultralife 4 provides long-life protection against all forms of corrosion by the use of optimised and patented organic corrosion inhibitors. This product does not contain nitrates, nitrites, amines,
borates or silicates. Excellent and lasting high temperature corrosion protection is provided forthe aluminium heat transfer surfaces contained in modern engines. Furthermore, Ultralife 4 offersexcellent cavitation protection.
Multivis ADT DV 5W-30 has been developed to help combat the issue of Low Speed Pre-ignition (LSPI) which can cause damage to certain petrol engine types.
SAMOA Pumpmaster 2 - 3:1 Ratio Air Operated Transfer Package for IBC Mounting
Morris GEO LZ 40 is a premium high performance, low ash gas engine oil formulated to lubricate high-output, 4-cycle natural gas engines operating on special gases such as landfill and bio digestion.
Morris Golden Film classic 2-stoke is an ideal choice for 1950’s, 1960’s and 1970’s British, Japanese and European classic 2-Stroke motorcycle and scooter engines
Morris Lubricants Ultralife 1 is suitable for the cooling systems of modern engines in passenger car, trucks, agricultural and contractors plant, where an OAT antifreeze is demanded by the following OEMs:
Multivis ADT RN 5W-30 has been specifically formulated to cope with the demands of Renault vehicles produced after 2018 and fitted with their latest gasoline and diesel engines. This product also covers the requirements of older units where RN0700 and RN7
R260 High strength contact adhesive in non-chlorinated form
PRECISION Solvent Tool & Electronics Cleaner is a non-chlorinated, medium to fast evaporating, light duty cleaner for use on metallic and plastic surfaces, removing general grime, and also greases and oils in heavier duty applications. Can be used on electrical equipment once the supply has been isolated.
Morris GEO Plus MA 40 is a premium high performance, medium ash gas engine oil formulated to lubricate high-output, 4-cycle natural gas engines operating on special gases such as landfill and Bio digestion. The product has specially been developed for use in environments where the gas feed is at its harshest including high levels of H2S.
TYGRIS Heavy Duty Adhesive is an easy to use adhesive for bonding most surfaces including textile, foam, rubber, plastic, foil, cardboard and paper. Good for fixing down carpets, underlay and floor tiles. In a non-chlorinated form for maximum safety.
Gravity feed kit for AdBlue®/DEF
IS91 (Part of a 3 part non-destructive testing system). Part 1 is an effective slow-drying solvent cleaner
IS92 Dye Penetrant (Part 2 of a 3 part non-destructive testing system)
Multitrans VTS is recommended for use in the automatic transmissions of commercial vehicles, buses, coaches, off-highway / construction equipment and passenger cars. The product may also be used in certain hydraulic applications, where a fluid of this type and specification is required.
Morris Lubricants Versimax® HD16 5W-30 has been developed for use in diesel engines fitted with exhaust gas re-circulation (EGR), selective catalytic reduction (SCR – Adblue) NOx reduction systems, diesel oxidation catalysts (DOC) and diesel particulate filters (DPF).
TYGRIS Stripeline Marking Paint Blue is a solvent based paint used for applying semi-permanent markings to most hard surfaces, inside or outside. Used inverted with a handheld or wheeled applicator, this paint is rapid drying and has good resistance to abrasion and chemicals. Available in 7 colours for safety and legal purposes.
Polypropylene blue coloured lever action pump with EPDM seals - 2" BSP (M) thread. Suitable for AdBlue®/DEF.
Morris Lubricants Liquimatic XT284 is recommended for use in highly stressed plant and off-highway transmission systems incorporating wet brake technology
Faracut HS3 is a highly refined cutting oil with special lubricity additives to enhance cutting without the use of Chlorine, Sulphur or Phosphorus
Multitrans MTS 75W-90 gear oil is designed and recommended for use in non-syncronised manual gearboxes, differentials and final drives, where a SAE 75W-90, complying with one of the following performance levels, is specified. API GL-5, API MT-1, SAE J2360, Scania STO 1:0, MIL-PRF-2105E.
TYGRIS Super Lube Extreme Pressure is a PTFE reinforced lubricant with excellent penetrating properties. De-waters, lubricates, releases and protects.
Morris GEO Ultra Plus 40 is a premium high performance, low ash gas engine oil formulatedto lubricate high-output, 4-cycle natural gas engines operating on special gases such aslandfill and Bio digestion.
Morris Lubricants Ultralife 2 may be used with confidence in engines manufactured from cast iron, aluminium or combinations of the two metals, and in cooling systems made of aluminium or copper alloys. It is particularly recommended for use in Asian OEM’s, in line with their basic chemistryrequirements.
Developed to offer improved performance capable of meeting the demands of vane pumps used in biogas digestion plants. Formulated from high quality Group II base oils and a combination of ashless additives that provide excellentoxidation stability, protection against rust & corrosion, low foaming and excellent demulsibility.
Morris Lubricants Versimax HD18 5W-20 maximises fuel efficiency potential by producing a thin strong oil film whilst under load, which in turn reduces energy losses and CO2 output.
Morris K65 is an industrial, extreme temperature, medium consistency plain and rolling bearing grease for applications at operating temperatures up to 600°C.
Typical applications include: kiln car bearings, furnace doors, drying tunnel mechanisms and other applications where high temperatures are encountered.
Lodexol HPS 75W-90 gear oil is designed and recommended for use in manual gearboxes, semiautomatic gearboxes, transaxles, transfer boxes, differentials and final drives, where a SAE 75W-90 lubricant of this performance level is specified.
A fully synthetic (mineral oil free) metalforming fluid with very high lubricity. This makes it suitable for a wide range of applications and metals.
Minimum quantity for "Premier Super-Synth 1005" is 8.
SAMOA Pumpmaster 2 - 3:1 Ratio Air Operated Trolley Mounted Mobile Oil Dispenser for 205 Litre Drums
Morris Lubricants Race 4T 5W-40 is recommended for all turbo-charged and naturally aspirated racing engines and super bikes or where the manufacturer specifies an oil of this type and specification.
PROTEAN Seize Release+ is a NSF: H1 registered spray-formulated fast acting penetrating and dismantling lubricant and suitable for use within Food & Beverage, Packaging, Pharmaceutical and other cleanroom environments.
Multitrans SA 75W-140 is designed and recommended for use in heavy duty axle / differential applications including Scania units requiring a lubricants with a STO 2:0A qualification.
Liquimatic D46 is designed to provide outstanding hydraulic system efficiency, clean performance, excellent oxidation and thermal stability. The high level of anti-wear properties and excellent film strength result in a high degree of equipment protection that not only results in fewer breakdowns but helps improve production capacity.
PROTEAN Instant Degreaser is an INS: A1 registered ready-to-use general cleaner suitable for use in around food processing area, though not intended for direct food contact. Both odourless and non-tainting, PROTEAN Instant Degreaser is tested to BS EN 1276 and kills bacteria fast and effectively.
Multivis ECO PV 0W-20 is a low viscosity passenger car engine oil that provides advanced fuel economy performance coupled with outstanding wear protection and cleanliness under a wide variety of driving conditions.
Morris Lubricants Race 4T 10W-30 is recommended for the majority of high performance four stroke motorcycles, where a product of this type and specification is demanded. Safe for use in wet clutch systems.
Versimax HD11 5W-30 is a top tier heavy duty diesel specific engine oil that has been designed to meet the necessary chemical limits required to maintain the efficiency of exhaust aftertreatment devices
TYGRIS Leak Detector is an inoffensive, non-corrosive foam used in the inspection of pipework to prevent leaks passing unnoticed with potentially dangerous effects. It will detect any leaks instantly and is harmless to most materials as well as being safe to use with most gases.
Multivis ECO H 0W-16 is a high performance synthetic engine oil formulated to cope with the exactingdemands of OEMs requiring low viscosity engine oils.
Manufacturers include Honda, Toyota, Mitsubishi, Nissan and Suzuki (Baleno (A1K412 SHVS), Ignis (ATK412 & ATK412 SHVS), Swift (A2LL412 & A2L412 SHVS)).
TYGRIS Anti-Static Foaming Cleaner is designed for use around the workplace where the build up of dust is undesirable, its anti static properties dissipating static electrical charges effectively. For use on all water resistant, non porous surfaces, the foaming action aids in clinging to vertical surfaces.
Morris Golden Film 10W-40 is suitable for use in passenger cars and light commercial vehicles, that may have originally specified a 10W-40 or where engines have been rebuilt or restored.
Morris Workshop Pro Premium Barrier Cream prevents noxious substances coming into contact with the skin and stops soiling from penetrating deep into the skin, as well as reducing skin irritation and minimising allergy and sensitivity potential.
NEVASTANE EP oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP. Superior protection against high loads.Adapted to a wide range of applications.
SAMOA Pumpmaster 2 - 3:1 Ratio Air Operated Metered Transfer Package for 205 Litre Drums
Ankor ST is a solvent deposited, short to medium term rust preventative, for use on components that are exposed for relatively short time periods or in less harsh environments. This product has low surface tension and viscosity and therefore spreads rapidly, penetrating into less accessible areas and covering all surfaces however irregular. It dries to leave a continuous protective coating
NEVASTANE EP oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP.Superior protection against high loads.Adapted to a wide range of applications.
Suitable to be used with Premier Lubricants 20 & 25 litre plastic drums using the included adaptor.
Ankor RR is a general purpose de-watering fluid and thin film solvent deposited rust preventative. Ankor RR has a low viscosity and surface tension to aid the penetration and spreading ability into the less accessible parts whilst imparting the required de-watering action. Once dry Ankor RR leaves a soft oily thin film that will impart corrosion protection for a variety of materials under
Multi-System Central Hydraulic Fluid is an advanced synthetic formulation for use in applications and vehicle systems that require the use of CHF 11S and CHF 202 fluids, both of which are registered trade marks of Deutsche Pentosin-Werke GmbH. This product may also be used in all applications that require the use of LHM Plus fluid.
Multivis ECO VB 0W-20 is a high performance fully synthetic engine oil formulated to cope with the exacting demands of OEMs requiring low viscosity engine oils, in particular Volkswagen Audi Group.
A range of gear oils, combining high quality mineral oils and extreme pressure (EP) additives for use in industrial gear systems. Lodexol Industrial Gear Oils have high load carrying capability and are formulated to protect against wear, oxidation, foam, rust and corrosion.
NEVASTANE AW oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP. Excellent anti-wear and corrosion protection.Miscible with mineral fluids.
A specially developed grease using a semi-synthetic blend of base oils manufactured with a bentone thickener containing a high level of graphite and synergistic EP-additives and antioxidants designed particularly for hydraulic hammer lubrication, pin and bush type of applications on large earth moving and general off-road heavy plant machinery.
The Alto range of machine oils contain anti-rust and antioxidant additives (R&O) that are blended into high quality mineral oils that possess good natural lubricating properties enhanced by modern refining techniques. They have good viscosity indices and separate from water cleanly and quickly.
Versimax HD17 5W-30 is designed for use in diesel engines meeting Euro IV, V and VI emission requirements where an oil of this quality is specified.
F406 is is a NSF: K2 registered quick drying solvent cleaner suitable for use within Food & Beverage, Packaging, Pharmaceutical and other cleanroom environments.
A light coloured medium viscosity neat cutting oil, designed for general purpose light duty machining operations.
A range of gear oils, combining synthetic base fluids and powerful extreme pressure (EP) additives, for use in industrial gear systems. Lodexol FS Industrial Gear Oils are formulated to protect against wear, oxidation, foam, rust and corrosion.The synthetic base fluids used in this range have outstanding thermal stability ensuring that gear systems running at elevated temperatures have the
Morris Airforce VPO HV is recommended for use in a wide range of positive displacement vacuum pumps, including rotary vane, lobe, screw and reciprocating designs.
Water Glycol based hydraulic fluid, VG46
This product is the only acceptable transmission fluid for NAG2V Sport transmissions and the 7GTronic models: W7A 700 / NAG2. Additional applications include 5-speed models that employ acontrolled torque converter lockup clutch for rear-wheel drive vehicles, which are also fitted in certainChrysler models. These model designations are: 722.6 / W5A 580 / NAG1.
K90 Calcium Sulphonate Complex Grease has been developed as a high performance grease for constructionplant such as bulldozers, scrapers, loading shovels and dump trucks where it will give outstanding performance.It is also recommended for use in industrial equipment operating at high temperatures or exposed to salt water.
NEVASTANE AW oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP.Excellent anti-wear and corrosion protection.Miscible with mineral fluids.
Crystal White Oils are highly refined medicinal grades, that are water white in colour, odourless and tasteless. These products are extremely stable and will not break down or form sludges. Category Code: H1, HX-1, 3H
Professional two-hand grease gun for use with eco-friendly 500g screw-in cartridges
A low oil content semi-synthetic cutting fluid, incorporating the latest in formaldehyde and boron-free technology.
Morris Race ATV 10W-40 is recommended for use in all-terrain vehicles, quad bikes, generator sets and other ancillary equipment, where a product of this type and viscosity grade is specified.
Morris Heavy Liquid Paraffin is a highly refined medicinal white oil grade that is water white in colour, odourless and tasteless. This product is extremely stable and will not break down or form sludges.
Petro-Canada Lubricants’ ENDURATEX™ EP Gear Oils are premium quality, extreme-pressure lubricants designed for use in enclosed industrial gear drives operating under normal, heavy or shock-loaded conditions.
F414 is a NSF: H1 registered food grade belt dressing spray designed to reduce slippage and extend the life of drive belts, increasing transmitted power and improving efficiency and cost savings.
Multivis ECO V 0W-30 is an engine oil providing not only the potential for fuel savings but a high level of component protection under a wide range of operating conditions in passenger cars or light commercial vehicles.
Specially formulated ash-less compressor oil for the lubrication of both reciprocating and rotary air compressors.
Service life of up to 4000 hours in reciprocating compressors.
This product has a very low surface tension and viscosity and therefore spreads rapidly, penetrating into all hard to reach parts and covering all surfaces however irregular. It dried to leave a continuous protective coating of viscous petroleum products and additives that have powerful rust preventative properties. This product is particularly useful where the metal parts to be treated
Invert emulsion type fire resistant hydraulic fluid, VG46
Hard smooth non-porous grease with good resistance to oxidation. Formulated from a soap thickened mineral oil Premier Block Grease exhibits only slight changes in consistency at elevated temperatures.
A range of fully synthetic gear oils, manufactured from polyalkylene glycol (PAG) fluids and specialised extreme pressure (EP) additives, to provide outstanding protection at all temperatures to industrial gear systems. Unlike conventional gear oils PAG fluids maintain an effective lubricating film over a wide operating temperature range, from artic conditions to high thermal loadings. PAG Fluids
The Terrain CT range is formulated with high quality mineral oils and additives designed to provide the correct frictional characteristics required by Caterpillar in transmission and hydraulic systems. The additive system also gives this oil improved temperature performance, superior resistance to oxidation, rust, corrosion and improved anti-foam properties. In addition these grades have excellent
Morris Multitrans CVT is a high performance transmission fluid, designed for use in a wide variety of pushbelt type Continuously Variable Transmissions (CVTs), including Jatco and Aisin systems.
NEVASTANE EP oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP
A range of gear oils, combining synthetic base fluids and powerful extreme pressure (EP) additives, for use in industrial gear systems. Lodexol FS Industrial Gear Oils are formulated to protect against wear, oxidation, foam, rust and corrosion.
AIR FORCE 8000 FS is a range of ester based, fully synthetic, compressor lubricants designed specifically to meet the requirements of rotary screw compressors including modern, variable speed types. They incorporate the latest additive technology and have proved to be far superior in performance to conventional oils under all conditions.
Premier Ease Release Oil is specially blended, highly versatile, quality neat oil with surfactant which is ideal for use on metal, timber, other formwork materials and coatings
A range of fully synthetic gear oils, manufactured from polyalkylene glycol (PAG) fluids and specialised extreme pressure (EP) additives, to provide outstanding protection at all temperatures to industrial gear systems. Unlike conventional gear oils PAG fluids maintain an effective lubricating film over a wide operating temperature range, from artic conditions to high thermal loadings.
These products contain additives to prevent rust and corrosion that can occur in systems that are vulnerable to condensation between operations. Anti-foam additives are also incorporated to encourage the release of entrained air and to collapse foam. This is vitally important as air bubbles or foam can reduce the effectiveness of the heat transfer system.Atonal Heat Transfer Oils also contain
Ultralife HD is ethylene glycol based antifreeze, which uses Organic Acid Technology and is free from nitrites, amines, phosphates, borates and silicates.
Morris Versimax HD14 10W-30 is designed for use in Euro 5 / Euro 6, Interim Tier 4 / Stage 3B / Tier 4 and Stage 4 diesel engines
Magnol HVI46 High Viscosity Index Oil is recommended for both Industrial and off highway hydraulic systems, where extreme operating conditions are encountered. Can also be used in hydrostatic drives, power steering systems, brake systems and other applications where products of this type and specification required.
SUPERCUT 3000 is a micro-emulsion metalworking fluid that is readily miscible with most mains water producing a transparent blue emulsion that is suited to a wide variety of applications.
FINAVESTAN white oils are obtained from petroleum through severe refining processes that guarantee an extremely high purity.
FINAVESTAN are transparent and colourless oils. They are also odourless and tasteless
FINAVESTAN white oils are NSF 3H and H1 registered