Metal Working Fluids

A solvent deposited, medium term rust preventative with water displacing properties providing a thin grease film when dry. Ankor C has good operator acceptability due to its low odour and ease of application by dipping, brushing or spraying

This product has a very low surface tension and viscosity and therefore spreads rapidly, penetrating into all hard to reach parts and covering all surfaces however irregular. It dried to leave a continuous protective coating of viscous petroleum products and additives that have powerful rust preventative properties. This product is particularly useful where the metal parts to be treated

Ankor RR is a general purpose de-watering fluid and thin film solvent deposited rust preventative. Ankor RR has a low viscosity and surface tension to aid the penetration and spreading ability into the less accessible parts whilst imparting the required de-watering action. Once dry Ankor RR leaves a soft oily thin film that will impart corrosion protection for a variety of materials under

Ankor ST is a solvent deposited, short to medium term rust preventative, for use on components that are exposed for relatively short time periods or in less harsh environments. This product has low surface tension and viscosity and therefore spreads rapidly, penetrating into less accessible areas and covering all surfaces however irregular. It dries to leave a continuous protective coating

TDR Paste: A waxy paste usually applied by dipping the tool into the product.  

A viscous liquid usually applied by the use of squeeze or dripping bottle.

A solvent deposited, general purpose medium to long term rust preventative with water displacing properties. On drying, a thin grease film provides long term indoor protection or medium to long term outdoor protection dependent upon storage conditions. Application, preferably by dipping but spraying or brushing may also be employed. Removal is by hydrocarbon solvent or by use of a suitable alkaline

Terralus AIR-O-LUBE is a pale amber liquid derived from natural vegetable oils blended with performance enhancing additives. It has low toxicity and is readily biodegradable. Terralus AIR-O-LUBE is a specially balanced formulation for use through metered mist air equipment to ensure economical lubricant utilisation and eliminates fluid loss associated with flood coolants. It has a high affinity to metal surfaces giving superior adhesion and on contact, the airborne droplets cling to minimise back scatter.

A highly effective flushing additive, designed to be added to old cutting fluid emulsions to assist cleaning of system prior to changing.    

A nitrite-free, mineral oil free grinding fluid incorporating the latest biostable technology.

Forms a good stable milky emulsion, even in hard waters up to 400 ppm Ca CO3 hardness. Good inhibition against corrosion of a wide range of ferrous metals, giving protection to workpiece and machine parts. Also good resistance to contact corrosion, so workpieces may be stacked without staining taking place. Low staining potential on many non-ferrous metals including copper and its alloys

A light coloured medium viscosity neat cutting oil, designed for general purpose light duty machining operations.

A fully biodegradeable product developed specifically for metal cutting applications where the lubricant is applied by air-misting.

A translucent green, biostable, micro-emulsion metalworking fluid that offers excellent workpiece visibility and extended sump life. It is non-staining to ferrous and non-ferrous materials which enables it to be used on a wide variety of metals from medium tensile and high carbon steels to cuprous alloys and cast iron. It is particularly suited to modern CNC machning centres. Premiercut GP is ideal

Hard metals such as tungsten carbide contain significant amounts of Cobalt in their make-up. It has been shown* that if released into the work place, Cobalt poses a health hazard to machine operators. If conventional synthetic grinding fluids are used to grind carbides, Cobalt is automatically released into the fluid and builds up to harmful levels. A specialist product is therefore required to prevent

A fully synthetic (mineral oil free) metalforming fluid with very high lubricity. This makes it suitable for a wide range of applications and metals.

A high performance neat cutting oil specifically developed for use on severe applications.

Morris Supergrind MP is part of the new generation of grinding fluids which are nitrite, mineral oil,
sulphur, chlorine and phenol free, and having excellent resistance to attack by moulds and
bacteria, resulting in extended odour free sump life.  

Materials: Ferrous and non-ferrous, tool steels, engineering and ceramics.

A biostable, semi-synthetic cutting fluid designed for use in applications where extra lubricity and extreme pressure properties are required, such as: Sawing of aluminium and aerospace alloys. Broaching. Screw cutting of alloy steels. Deep hole boring. Spray applied gun drilling Forming.

Supergrind Plus is a fully synthetic grinding fluid offering exceptional performance and extended sump life in most grinding operations. It is formulated using the latest technology and offers excellent corrosion protection, stable solutions, low foaming tendency, excellent fines separation and resistance to degradation by bacteria or fungi. The synthetic formulation also alleviates wheel glazing

Morris Cora B is suited to general machining operations on ferrous metals up to medium tensile steels and non-ferrous metals. The additive system ensures improved surface finish and tool life whilst remaining non-staining to copper and its alloys.

Supergrind SW is a fully synthetic water-mix grinding fluid that forms a true solution when diluted with water. Supergrind SW is formulated to have a very low foaming tendency, even when used with soft water. 

Faracut HS3 is a highly refined cutting oil with special lubricity additives to enhance cutting without the use of Chlorine, Sulphur or Phosphorus

Morris Supergrind Ultra is a premium quality versatile fully synthetic clear grinding fluid that is

free from nitrites, phenols, sulphur and chlorinated additives. It is recommended for the following operations & materials. 

Operations: Surface, centreless and cylindrical grinding, ultra-fine roll grinding, high speed

machining.
Materials: High carbon steel, stainless steel, non-ferrous alloys, non-metals composites and
glasses. 

A neat cutting oil with high levels of active sulphurised fat and chlorine EP additives, making it suitable for a variety of medium to heavy duty machining operations on ferrous metals. Particularly suited to thread rolling and gear cutting on medium to high tensile steels.

Marcia DE is a heavy duty neat cutting oil containing high levels of extreme pressure additives. These along with the excellent lubricity provided by sulphurised esters and other lubricity additives ensures a high performance in many arduous applications involving ferrous feedstocks, high alloyed steels, high tensile steels and stainless steels. Marcia DE is formulated to ensure excellent surface

Morris Supercut 1000 is readily miscible with most mains water to form a stable, rich, milky white

emulsion of low odour and good corrosion protection and is designed to give improved sump life
over competitive traditional milky soluble oils.

Specially selected base oils and additives ensure a low misting potential in use, whilst also ensuring excellent flushing of honing stones and excellent swarf separation. Marcia H may also be utilised in a number of  light to medium duty applications involving free cutting ferrous alloys.