Morris Lubricants

Ring Free XHD monogrades are high quality engine oils particularly recommended for haulage, plant contractors and certain mixed fleet operations. They are manufactured from high quality mineral oils and provide protection against wear, rust and corrosion. The technology used in these oils gives excellent results in 4-stroke turbo-charged and naturally aspirated indirect injected diesel engines and

Ring Free XHD monogrades are high quality engine oils particularly recommended for haulage, plant contractors and certain mixed fleet operations. They are manufactured from high quality mineral oils and provide protection against wear, rust and corrosion. The technology used in these oils gives excellent results in 4-stroke turbo-charged and naturally aspirated indirect injected diesel engines and

Terrain LS 80W-90 has been specifically designed for use in limited slip differentials and wet brake systems fitted to off-highway and agricultural equipment. where differential loadings are high and where a variety of operating conditions may be encountered.

Manufactured from a Calcium soap base and highly refined mineral oil, with added graphite to provide boundary lubrication and protection against seizure in conditions when ordinary greases would fail. Also included in this grease are additives to prevent corrosion, rust and oxidation. Additionally, this grease shows excellent resistance to severe mechanical working.

These multipurpose Lithium based greases are prepared from highly refined mineral oil, with the addition of powerful sulphur phosphorus extreme pressure additives. This range of greases has exceptional mechanical stability, maintaining their consistency even after severe working. They are resistant to water washing, protect against rust and are non-corrosive to non-ferrous bearing metals and steel

This is a low viscosity water white mineral oil specially prepared as a reference fluid for diesel injection testing equipment. A fluid such as Seria Fuel Pump Test Oil is produced to very close specification limits, which are essential for accurate and consistent results in test equipment. It is not possible to perform these testing procedures with diesel fuels that can vary considerably in viscosity

This  semi fluid, soft Lithium based greases has been specially designed for use in centralised lubrication systems. It is easily pumped, has superb oxidation resistance, exceptional mechanical stability, good water resistance and rust protection and can be used over a wide range of operating temperatures.It conforms to all leading bearing manufacturers specifications for general purpose

Terralus Viroclean is a non-toxic, water-based, biodegradable cleaner. The concentrate is mildly alkaline to aid dirt removal but contains no petroleum or chlorinated solvents.

Multitrans DCT is a premium multi-vehicle DCT fluid, formulated to provide the required levels of component protection and friction control, critical to the operational efficiency and longevity of dual clutch designs.

Morris Multitrans CVT is a high performance transmission fluid, designed for use in a wide variety of pushbelt type Continuously Variable Transmissions (CVTs), including Jatco and Aisin systems.

Groundforce 2HSS is a top quality synthetic boosted 2-stroke oil, utilising the latest performance additive technology, for protection and performance.

The Alto range of machine oils contain anti-rust and antioxidant additives (R&O) that are blended into high quality mineral oils that possess good natural lubricating properties enhanced by modern refining techniques. They have good viscosity indices and separate from water cleanly and quickly.

The Alto range of machine oils contain anti-rust and antioxidant additives (R&O) that are blended into high quality mineral oils that possess good natural lubricating properties enhanced by modern refining techniques. They have good viscosity indices and separate from water cleanly and quickly.

The Alto range of machine oils contain anti-rust and antioxidant additives (R&O) that are blended into high quality mineral oils that possess good natural lubricating properties enhanced by modern refining techniques. They have good viscosity indices and separate from water cleanly and quickly.

The Alto range of machine oils contain anti-rust and antioxidant additives (R&O) that are blended into high quality mineral oils that possess good natural lubricating properties enhanced by modern refining techniques. They have good viscosity indices and separate from water cleanly and quickly.

The Alto range of machine oils contain anti-rust and antioxidant additives (R&O) that are blended into high quality mineral oils that possess good natural lubricating properties enhanced by modern refining techniques. They have good viscosity indices and separate from water cleanly and quickly.

The Alto range of machine oils contain anti-rust and antioxidant additives (R&O) that are blended into high quality mineral oils that possess good natural lubricating properties enhanced by modern refining techniques.  They have good viscosity indices and separate from water cleanly and quickly.

The Alto range of machine oils contain anti-rust and antioxidant additives (R&O) that are blended into high quality mineral oils that possess good natural lubricating properties enhanced by modern refining techniques. They have good viscosity indices and separate from water cleanly and quickly.

Arcato R refrigeration oils are designed for use in refrigeration and air conditioning system compressors. The range is manufactured from high quality naphthenic mineral oils, providing the stability and low temperature characteristics necessary for the correct lubrication and operation for this type of equipment.

The Alto range of machine oils contain anti-rust and antioxidant additives (R&O) that are blended into high quality mineral oils that possess good natural lubricating properties enhanced by modern refining techniques. They have good viscosity indices and separate from water cleanly and quickly.

The Alto range of machine oils contain anti-rust and antioxidant additives (R&O) that are blended into high quality mineral oils that possess good natural lubricating properties enhanced by modern refining techniques. They have good viscosity indices and separate from water cleanly and quickly.

K62 is a premium quality non-melting grease for use in plain and anti-friction bearings subjected to elevated temperatures. The consistency of the grease remains stable throughout a wide temperature range.

K15is a black residual lubricant, which has been compounded with fatty agents to give extra oiliness and water resistance. This tough lubricant has tremendous film strength and adhesion to metal surfaces. It acts as a cushion between moving parts, providing outstanding protection against wear, rust, corrosion, and quietening of noisy gears. This lubricant is not dislodged from metal parts by water

Magnaplex K982 an aluminium complex grease specifically formulated for use on open gears. This product has high load carrying and adhesive characteristics, which not only allow it to be used on gears with circumferential speeds in excess of 20m/sec., but also where exceptionally high loads and slow sliding speeds are encountered. It is free of bitumen, solvents and other components, which are hazardous

A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater. Excellent anti-wear and EP properties provide protection against wear in the most demanding of systems.

A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater. Excellent anti-wear and EP properties provide protection against wear in the most demanding of systems.

A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater. Excellent anti-wear and EP properties provide protection against wear in the most demanding of systems.

A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater. Excellent anti-wear and EP properties provide protection against wear in the most demanding of systems.

A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater.

Liquimatic VG5 is a low viscosity hydraulic oil blended from high quality mineral oils and a balanced additive system. It possesses excellent lubricating properties, with reduced oil mist and demulsification performance.

Recommended for both Industrial and off highway hydraulic systems, where extreme operating conditions are encountered. Can also be used in hydrostatic drives, power steering systems, brake systems and other applications where products of this type and specification required.

Recommended for both Industrial and off highway hydraulic systems, where extreme operating conditions are encountered. Can also be used in hydrostatic drives, power steering systems, brake systems and other applications where products of this type and specification required.

AIR FORCE 8000 FS is a range of ester based, fully synthetic, compressor lubricants designed specifically to meet the requirements of rotary screw compressors including modern, variable speed types. They incorporate the latest additive technology and have proved to be far superior in performance to conventional oils under all conditions.

AIR FORCE 8000 FS is a range of ester based, fully synthetic, compressor lubricants designed specifically to meet the requirements of rotary screw compressors including modern, variable speed types. They incorporate the latest additive technology and have proved to be far superior in performance to conventional oils under all conditions.

AIR FORCE 8000 FS is a range of ester based, fully synthetic, compressor lubricants designed specifically to meet the requirements of rotary screw compressors including modern, variable speed types. They incorporate the latest additive technology and have proved to be far superior in performance to conventional oils under all conditions.

A range of gear oils, combining high quality mineral oils and extreme pressure (EP) additives for use in industrial gear systems. Lodexol Industrial Gear Oils have high load carrying capability and are formulated to protect against wear, oxidation, foam, rust and corrosion.

A range of gear oils, combining high quality mineral oils and extreme pressure (EP) additives for use in industrial gear systems. Lodexol Industrial Gear Oils have high load carrying capability and are formulated to protect against wear, oxidation, foam, rust and corrosion.

A range of gear oils, combining high quality mineral oils and extreme pressure (EP) additives for use in industrial gear systems. Lodexol Industrial Gear Oils have high load carrying capability and are formulated to protect against wear, oxidation, foam, rust and corrosion.

A range of gear oils, combining high quality mineral oils and extreme pressure (EP) additives for use in industrial gear systems. Lodexol Industrial Gear Oils have high load carrying capability and are formulated to protect against wear, oxidation, foam, rust and corrosion.

A range of gear oils, combining high quality mineral oils and extreme pressure (EP) additives for use in industrial gear systems

A range of gear oils, combining synthetic base fluids and powerful extreme pressure (EP) additives, for use in industrial gear systems. Lodexol FS Industrial Gear Oils are formulated to protect against wear, oxidation, foam, rust and corrosion.

A range of industrial gear oils, combining high quality mineral oils and extreme pressure (EP) additives, intended for use in industrial gear systems of the spur, helical and straight and spiral bevel types. Lodexol Industrial Gear Oils have high load carrying capability and ensure 'clean’ gear performance under conditions of high temperature and oxidation. Additionally these grades provide strong protection against wear, oxidation, foam, rust and corrosion.

Steam Car Compound 1000 Cylinder Oil is for use in most Locomotives and Stationary engines working with either saturated or superheated steam.

Fully Synthetic Chain Lube - protects chains from wear and corrosion. Initialy a thin free-flowing lubricant when sprayed it penetrates into vital inner pins and bushes of the chain links where it cushions against shock loading.

Astra Slideway Lubricants have been specifically developed for the lubrication of machine tool slideways and tables. They have been formulated from high quality mineral oil, performance additives and incorporate a tackifier to ensure that the lubricant adheres to the moving parts at all times. The performance additives provide outstanding resistance to oxidation, corrosion and wear and eliminate stick

Contains high levels of extreme pressure and lubricity additives thereby making it suitable for many arduous applications on hardened ferrous metals, high alloy steels and stainless. Despite its high EP loading Marcia T is a light coloured, low odour product, and hence has better operator acceptability than traditional products based on sulphurised fats.The high levels of EP and lubricity additives

Fork Oils are made from selected high quality mineral oils and performance additives, ensuring compatibility with all seals and other fork components. High Viscosity Index ensures smooth predictable damping over a wide temperature range.

Servol 15W/40 is manufactured from high quality mineral oils and a high performance additive system. This grade is designed for use in petrol and diesel engines and their turbocharged versions.

Morris Servol 10W/40 is suitable for use in passenger cars, light commercial vehicles, horticultural equipment, etc., where a grade of this type and performance level is required.

A range of gear oils, combining synthetic base fluids and powerful extreme pressure (EP) additives, for use in industrial gear systems.  Lodexol FS Industrial Gear Oils are formulated to protect against wear, oxidation, foam, rust and corrosion.The synthetic base fluids used in this range have outstanding thermal stability ensuring that gear systems running at elevated temperatures have the

A range of gear oils, combining synthetic base fluids and powerful extreme pressure (EP) additives, for use in industrial gear systems. Lodexol FS Industrial Gear Oils are formulated to protect against wear, oxidation, foam, rust and corrosion.The synthetic base fluids used in this range have outstanding thermal stability ensuring that gear systems running at elevated temperatures have the correct

A range of fully synthetic gear oils, manufactured from polyalkylene glycol (PAG) fluids and specialised extreme pressure (EP) additives, to provide outstanding protection at all temperatures to industrial gear systems. Unlike conventional gear oils PAG fluids maintain an effective lubricating film over a wide operating temperature range, from artic conditions to high thermal loadings.

A range of gear oils, combining synthetic base fluids and powerful extreme pressure (EP) additives, for use in industrial gear systems. Lodexol FS Industrial Gear Oils are formulated to protect against wear, oxidation, foam, rust and corrosion.The synthetic base fluids used in this range have outstanding thermal stability ensuring that gear systems running at elevated temperatures have the correct

A range of fully synthetic gear oils, manufactured from polyalkylene glycol (PAG) fluids and specialised extreme pressure (EP) additives, to provide outstanding protection at all temperatures to industrial gear systems. Unlike conventional gear oils PAG fluids maintain an effective lubricating film over a wide operating temperature range, from artic conditions to high thermal loadings. PAG Fluids

A range of fully synthetic gear oils, manufactured from polyalkylene glycol (PAG) fluids and specialised extreme pressure (EP) additives, to provide outstanding protection at all temperatures to industrial gear systems. Unlike conventional gear oils PAG fluids maintain an effective lubricating film over a wide operating temperature range, from artic conditions to high thermal loadings. PAG Fluids

Tabor 95 is a high quality concrete mould oil specially designed for production of slabs, posts and pavings where precision steel moulds are used. The formulation of light mineral oil, reactive fats and lubricity agents, is free of both solvents and wool fats and therefore the finished product has a low odour and a light colour. This product has better operator acceptability than traditional mould

Terza 7060 is a high quality low viscosity mould release oil containing solvent refined mineral oil, hydrocarbon solvent and lubricity additives.  It has been specially produced for use in high rate production of fired clay and concrete building products.  This is a low viscosity fluid, which after the evaporation of the solvent, dries to a tenacious oily film on the mould surface.  The

Tabor OK finds use in a variety of applications e.g. as a process oil, degreasing medium and as a dielectric fluid for spark erosion.  It is also suitable as a replacement for chlorinated solvents in certain applications and may be used as a lower odour, high flash point alternative to white spirit  where the evaporation rate is not critical.

Terza M-107 has been specially produced for use in high rate production of concrete roof tiles, on the type of machines where the moulds are continuously chain driven past the pouring hopper.  This is a low viscosity fluid, which after the evaporation of the solvent, dries to a tenacious oily film on the mould surface.  The low viscosity helps the film to flow and cover the mould surfaces, and spread

A range of fully synthetic gear oils, manufactured from polyalkylene glycol (PAG) fluids and specialised extreme pressure (EP) additives, to provide outstanding protection at all temperatures to industrial gear systems. Unlike conventional gear oils PAG fluids maintain an effective lubricating film over a wide operating temperature range, from artic conditions to high thermal loadings.

Morris Lodexol MTF 75W-80 has exceptionally good high temperature stability ensuring maximum gear set protection, even under prolonged arduous operation.

Atonal Heat Transfer Oils are manufactured with high quality mineral oils and incorporate powerful oxidation inhibitors to ensure the necessary thermal stability for high working temperatures over long periods.  These products contain additives to prevent rust and corrosion that can occur in systems that are vulnerable to condensation between operations.  Anti-foam additives are also incorporated

Astra Slideway Lubricants have been specifically developed for the lubrication of machine tool slideways and tables. They have been formulated from high quality mineral oil, performance additives and incorporate a tackifier to ensure that the lubricant adheres to the moving parts at all times. The performance additives provide outstanding resistance to oxidation, corrosion and wear and eliminate stick

Astra Slideway Lubricants have been specifically developed for the lubrication of machine tool slideways and tables. They have been formulated from high quality mineral oil, performance additives and incorporate a tackifier to ensure that the lubricant adheres to the moving parts at all times. The performance additives provide outstanding resistance to oxidation, corrosion and wear and eliminate stick

These products contain additives to prevent rust and corrosion that can occur in systems that are vulnerable to condensation between operations.  Anti-foam additives are also incorporated to encourage the release of entrained air and to collapse foam. This is vitally important as air bubbles or foam can reduce the effectiveness of the heat transfer system.Atonal Heat Transfer Oils also contain

Morris Race Light Gear Oil is the first choice for all high performance road and competition machines where a 10W-40 grade is specified.

Golden Film Classic Oils are a specialist range of high quality, low detergent/dispersant monograde lubricants. These oils are suitable for use in naturally aspirated four stroke petrol and diesel engines and classic gearbox designs.

Golden Film Classic Oils are a specialist range of high quality, low detergent/dispersant monograde & multi-grade lubricants. These oils are suitable for use in naturally aspirated four stroke petrol and diesel engines and classic gearbox designs.

Largo P1 is a highly refined, low odour, low viscosity mineral oil possessing excellent lubricating properties, good

Race Performance 2T is recommended for all two stroke engines, whether premix or injector, where an oil of this specification is demanded. Check the manufacturer’s handbook for mixing method and dilution ratios. Ideal for engines used for high mileage or stop/start duties, where reliability is paramount, i.e. messenger fleets.

Hard metals such as tungsten carbide contain significant amounts of Cobalt in their make-up. It has been shown* that if released into the work place, Cobalt poses a health hazard to machine operators. If conventional synthetic grinding fluids are used to grind carbides, Cobalt is automatically released into the fluid and builds up to harmful levels. A specialist product is therefore required to prevent

Fork Oils are made from selected high quality mineral oils and performance additives, ensuring compatibility with all seals and other fork components. High Viscosity Index ensures smooth predictable damping over a wide temperature range

Fork Oils are made from selected high quality mineral oils and performance additives, ensuring compatibility with all seals and other fork components. High Viscosity Index ensures smooth predictable damping over a wide temperature range.

Astra Slideway Lubricants have been specifically developed for the lubrication of machine tool slideways and tables. They have been formulated from high quality mineral oil, performance additives and incorporate a tackifier to ensure that the lubricant adheres to the moving parts at all times. The performance additives provide outstanding resistance to oxidation, corrosion and wear and eliminate stick

Astra Slideway Lubricants have been specifically developed for the lubrication of machine tool slideways and tables. They have been formulated from high quality mineral oil, performance additives and incorporate a tackifier to ensure that the lubricant adheres to the moving parts at all times. The performance additives provide outstanding resistance to oxidation, corrosion and wear and eliminate stick

Formulated for applications involving high removal rates of ferrous and non-ferrous materials. Due to the unique formulation, this product combines properties which ensure extremely good flushing performance coupled with low foaming characteristics that allow the fluid to stay clear and clean.Supergrind MP is part of the new generation of grinding fluids which are nitrite, mineral oil, sulphur, chlorine

Supergrind Plus is a fully synthetic grinding fluid offering exceptional performance and extended sump life in most grinding operations. It is formulated using the latest technology and offers excellent corrosion protection, stable solutions, low foaming tendency, excellent fines separation and resistance to degradation by bacteria or fungi. The synthetic formulation also alleviates &ldquowheel glazing

Supercut 8000 yields multi-metal compatibility, high tolerance to tramp oil and excellent surface finishes on many different alloys. The product has been specifically developed for use witnthe more difficult to machine alloys, whilst carefully selected corrosion inhibitor systems ensure stain free performance3 on steels, brasses and aerospace aluminium alloys.

Through its exceptional balance of cooling and lubricating properties, it has the outstanding ability to produce ultra-fine surface finishes. The product may be used on all metal types with the exception of hard metal carbides, and is especially recommended for non-metals, composites and glasses.Supergrind Ultra is ideal for surface grinding and roll grinding and may be used for ultra high speed machining

Morris Lubricants Transformer Oil is a highly refined naphthenic product for use solely in oil filled transformers and other electrical equipment.  The base stock and refining process has been specifically chosen to produce a long life product free of oxidation and sludging tendencies.

SUPERCUT G has multi-metal compatibility, tolerance to tramp oil and bacterial degradation , helps reduce tool wear and gives excellent surface finishes on many different alloys.  Supercut G has been developed specifically for use with the more difficult to machine alloys and aluminium.  Carefully selected corrosion inhibitor systems ensure stain free performance on most metals including steels

SUPERCUT 3000 is a micro-emulsion metalworking fluid that is readily miscible with most mains water producing a transparent blue emulsion that is suited to a wide variety of applications.

Golden Film AG Gear Oils are a range of mineral oil based lubricants, formulated without extreme pressure (EP) additives. These oils have good natural film strength, anti-foam performance and long term stability.

Morris Bearing Oils are recommended for all total loss applications where the special properties of these oils are needed

Morris Bearing Oils are recommended for all total loss applications where the special properties of these oils are needed.

This oil has been manufactured for the special requirements of these engines using today’s technology and materials. The traditional technology used in this oil provides outstanding, resistance to rust, corrosion, wear and oxidation, even in the presence of water. This oil also has a high viscosity index, giving good flow rates to bearings and all moving parts at low start up temperatures, coupled

Multivis ECO-S 0W/20 is a high performance fully synthetic engine oil formulated to cope with the exacting demands of OEMs requiring low viscosity engine oils.

Description

K968 is a premium quality, water resistant grease for use in food processing environments where incidental food contact may occur.

Multivis V 0W-20 is a low viscosity engine oil providing not only the potential for fuel savings, but a high level of component protection under a wide range of operating conditions in passenger cars

Morris Lodexol XFS 75W-90 is based on synthetic oil technology and will protect limited slip differentials fitted to high performance cars and motorsport models. Additionally this grade may be used in various other automotive drive axles, where a SAE 75W/90, API GL5 lubricant is required.

Morris Race Gear Oil has an extremely low fluid friction and does not rob power at start up or during racing. Recommended for use in all types of racing and competition gearboxes, where a SAE 75W-90 or SAE 10W-40 is specified.

Workshop Pro White Spray Grease is a combination of a Calcium and Zinc based grease in an aerosol form offering good resistance to water and heat. The product also offers long lasting protection against corrosion.

Morris Multivis ECO FB 5W-20 is recommended for use where manufacturers specify an SAE 5W-20 complying with one of the following performance
levels. Ford WSS-M2C948-B, API SP, ACEA C5

This product has a very low surface tension and viscosity and therefore spreads rapidly, penetrating into all hard to reach parts and covering all surfaces however irregular. It dried to leave a continuous protective coating of viscous petroleum products and additives that have powerful rust preventative properties. This product is particularly useful where the metal parts to be treated

Ankor RR is a general purpose de-watering fluid and thin film solvent deposited rust preventative. Ankor RR has a low viscosity and surface tension to aid the penetration and spreading ability into the less accessible parts whilst imparting the required de-watering action. Once dry Ankor RR leaves a soft oily thin film that will impart corrosion protection for a variety of materials under

Ankor ST is a solvent deposited, short to medium term rust preventative, for use on components that are exposed for relatively short time periods or in less harsh environments. This product has low surface tension and viscosity and therefore spreads rapidly, penetrating into less accessible areas and covering all surfaces however irregular. It dries to leave a continuous protective coating

Multi-System Central Hydraulic Fluid is an advanced synthetic formulation for use in applications and vehicle systems that require the use of CHF 11S and CHF 202 fluids, both of which are registered trade marks of Deutsche Pentosin-Werke GmbH. This product may also be used in all applications that require the use of LHM Plus fluid.

This product is the only acceptable transmission fluid for NAG2V Sport transmissions and the 7GTronic models: W7A 700 / NAG2. Additional applications include 5-speed models that employ a
controlled torque converter lockup clutch for rear-wheel drive vehicles, which are also fitted in certain
Chrysler models. These model designations are: 722.6 / W5A 580 / NAG1.

Multivis ECO H 0W-16 is a high performance synthetic engine oil formulated to cope with the exacting
demands of OEMs requiring low viscosity engine oils. 

Manufacturers include Honda, Toyota, Mitsubishi, Nissan and Suzuki (Baleno (A1K412 SHVS), Ignis (ATK412 & ATK412 SHVS), Swift (A2LL412 & A2L412 SHVS)).

Multivis ECO V 0W-30 is an engine oil providing not only the potential for fuel savings but a high level of component protection under a wide range of operating conditions in passenger cars or light commercial vehicles.

Morris Lubricants Multivis ADT FD 5W-30 is a synthetic tehnology engine oil specially formulated to meet the superior performance and fuel efficiency requirements of the latest generation of Ford diesels.

Faracut HS3 is a highly refined cutting oil with special lubricity additives to enhance cutting without the use of Chlorine, Sulphur or Phosphorus

Multivis ECO PC 0W-30 is a new generation passenger car engine oil formulated and developed for the latest PSA petrol and diesel engines, including hybrids

Lodexol MTFE 75W is a high performance, fully synthetic gear oil formulated and optimised for use in automotive gearboxes requiring a low viscosity SAE 75W. Lodexol MTFE 75W will provide potential fuel saving performance due to its low viscosity, which minimises friction in the gearbox.