Order Hotline: 01782 410381
Magnol HVI46 High Viscosity Index Oil is recommended for both Industrial and off highway hydraulic systems, where extreme operating conditions are encountered. Can also be used in hydrostatic drives, power steering systems, brake systems and other applications where products of this type and specification required.
Lydian Degreaser is recommended for removal of oil grease and dirt from metal, paintwork and concrete. Typical uses include cleaning used engines prior to overhaul, removing build-up on pipes and steelworks, cleaning concrete and brickwork. Many uses can be found in factories, yards and
compounds, where oil and grease build up is a problem, or perhaps even dangerous for vehicles and pedestrians.
Servol 15W/40 is manufactured from high quality mineral oils and a high performance additive system. This grade is designed for use in petrol and diesel engines and their turbocharged versions.
Morris Lubricants Multivis ADT FD 5W-30 is a synthetic tehnology engine oil specially formulated to meet the superior performance and fuel efficiency requirements of the latest generation of Ford diesels.
Multivis ADT C3 5W-30 is a mid SAPS synthetic multigrade engine oil specially formulated to meet the superior performance and fuel efficiency requirements of modern engines requiring low viscosity oils.
Specially selected base oils and additives ensure a low misting potential in use, whilst also ensuring excellent flushing of honing stones and excellent swarf separation. Marcia H may also be utilised in a number of light to medium duty applications involving free cutting ferrous alloys.
Faracut HS3 is a highly refined cutting oil with special lubricity additives to enhance cutting without the use of Chlorine, Sulphur or Phosphorus
Morris Lodexol XFS 80W-140 is based on synthetic oil technology and will protect limited slip differentials fitted to high performance cars (including BMW, Morgan, TVR, Aston Martin) and motorsport models. Additionally this grade may be used in various other automotive, agricultural and heavy duty designs of limited slip differential or drive axle, where a SAE 80W/140, API GL5 lubricant is required.
Morris Lodexol XFS 75W-90 is based on synthetic oil technology and will protect limited slip differentials fitted to high performance cars and motorsport models. Additionally this grade may be used in various other automotive drive axles, where a SAE 75W/90, API GL5 lubricant is required.
Advanced mineral oil based gear oil providing total driveline protection in gearboxes and differentials. Meets the following specifications:
Lodexol SS 80W-140 has extremely good cold start fluidity, ensuring fast circulation around gear systems even when the oil is cold. Additionally, Lodexol SS 80W-140 has exceptional high temperature stability, ensuring maximum gear set protection even under the most arduous operating conditions
Morris Lodexol SS 75W-90 meets API GL4 and API GL5 classifications, enabling grade rationalisation and reduced risk of misapplication. The semi-synthetic formulation also has good cold start fluidity, ensuring fast circulation around gear systems, even when the oil is cold.
A range of fully synthetic gear oils, manufactured from polyalkylene glycol (PAG) fluids and specialised extreme pressure (EP) additives, to provide outstanding protection at all temperatures to industrial gear systems. Unlike conventional gear oils PAG fluids maintain an effective lubricating film over a wide operating temperature range, from artic conditions to high thermal loadings.
A range of fully synthetic gear oils, manufactured from polyalkylene glycol (PAG) fluids and specialised extreme pressure (EP) additives, to provide outstanding protection at all temperatures to industrial gear systems. Unlike conventional gear oils PAG fluids maintain an effective lubricating film over a wide operating temperature range, from artic conditions to high thermal loadings. PAG Fluids
Specifically designed for the lubrication of Traction Motor gears commonly found on Diesel-Electriclocomotives operating on the rail networks and heritage lines.
Lodexol MTFE 75W is a high performance, fully synthetic gear oil formulated and optimised for use in automotive gearboxes requiring a low viscosity SAE 75W. Lodexol MTFE 75W will provide potential fuel saving performance due to its low viscosity, which minimises friction in the gearbox.
Morris Lodexol MTF 75W-80 has exceptionally good high temperature stability ensuring maximum gear set protection, even under prolonged arduous operation.
A range of gear oils, combining high quality mineral oils and extreme pressure (EP) additives for use in industrial gear systems. Lodexol Industrial Gear Oils have high load carrying capability and are formulated to protect against wear, oxidation, foam, rust and corrosion.
A range of industrial gear oils, combining high quality mineral oils and extreme pressure (EP) additives, intended for use in industrial gear systems of the spur, helical and straight and spiral bevel types. Lodexol Industrial Gear Oils have high load carrying capability and ensure 'clean’ gear performance under conditions of high temperature and oxidation. Additionally these grades provide strong protection against wear, oxidation, foam, rust and corrosion.
A range of gear oils, combining high quality mineral oils and extreme pressure (EP) additives for use in industrial gear systems
Lodexol HPS 75W-90 gear oil is designed and recommended for use in manual gearboxes, semiautomatic gearboxes, transaxles, transfer boxes, differentials and final drives, where a SAE 75W-90 lubricant of this performance level is specified.
Morris Lodexol FS 75W-90 is a synthetic high performance gear oil that has excellent extreme pressure (EP) performance and load carrying ability, as well as providing rust and corrosion protection to transmission components. This grade not only has outstanding low temperature fluidity, eliminating cold start gear selection problems (cold baulking), but can also cope with highly stressed gearboxes running at high temperatures.
A range of gear oils, combining synthetic base fluids and powerful extreme pressure (EP) additives, for use in industrial gear systems. Lodexol FS Industrial Gear Oils are formulated to protect against wear, oxidation, foam, rust and corrosion.The synthetic base fluids used in this range have outstanding thermal stability ensuring that gear systems running at elevated temperatures have the
A range of gear oils, combining synthetic base fluids and powerful extreme pressure (EP) additives, for use in industrial gear systems. Lodexol FS Industrial Gear Oils are formulated to protect against wear, oxidation, foam, rust and corrosion.The synthetic base fluids used in this range have outstanding thermal stability ensuring that gear systems running at elevated temperatures have the correct
A range of gear oils, combining synthetic base fluids and powerful extreme pressure (EP) additives, for use in industrial gear systems. Lodexol FS Industrial Gear Oils are formulated to protect against wear, oxidation, foam, rust and corrosion.
Morris Lodexol 80W-90 Gear Oil is designed for use in a wide variety of applications, including: manual gearboxes, transaxles, transfer boxes, axles, steering boxes, swivel pin housings, reduction hubs, oil lubricated bearings, power take-offs, hoist/winch gearboxes, slew gearboxes, chain drives, track drives, track rollers and idlers, etc.
Morris Locomax ZF 20W-40 ZF is blended to comply with the performance levels specified by the
Locomotive Maintenance Officers Association (LMOA) for Generations 4, 5 and 6. It also fulfilsthe requirements of API CF.
LOCOMAX 20W-40 R has been specifically formulated for the older diesel locomotive where the use of Zinc Free additives was not a prerequisite of the engine builders.
Liquisafe 46 is a high quality fire resistant hydraulic fluid blended with high and low molecular weight polyalkylene glycols in a stable water solution. The formulation includes special chemical additives that inhibit the formation of rust in the system, and provide anti-wear properties equal to that of mineral hydraulic oils. This product is compatible with all seals normally found in systems
Morris Lubricants Liquimatic XT284 is recommended for use in highly stressed plant and off-highway transmission systems incorporating wet brake technology
Liquimatic VG5 is a low viscosity hydraulic oil blended from high quality mineral oils and a balanced additive system. It possesses excellent lubricating properties, with reduced oil mist and demulsification performance.
Morris Liquimatic Super ATF is an automatic transmission fluid blended from high quality mineral oil, synthetic base fluids and a balanced additive system. This grade has superior performance in terms of frictional characteristics, seal compatibility, oxidation stability, low temperature fluidity and resistance to high temperatures encountered during severe operating conditions.
A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater. Excellent anti-wear and EP properties provide protection against wear in the most demanding of systems.
A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater.
A mineral based zinc free ISO VG 15 hydraulic oil for use in certain powersteering and brake activator systems, including JCB where specified.
High viscosity index hydraulic oil, formulated from high quality minerals oils and the latest anti-wear technology. Ideal for hydraulic systems subjected to the very extremes of operating conditions and temperatures, from frozen food stores (-20oC) to industrial hydraulic systems at elevated temperatures and off highway equipment.Recommended for both Industrial and off highway hydraulic systems, where
High viscosity index hydraulic oil, formulated from high quality minerals oils and the latest anti-wear technology. They are ideal for hydraulic systems subjected to the very extremes of operating conditions and temperatures, from frozen food stores (-20oC) to industrial hydraulic systems at elevated temperatures and off highway equipment.Recommended for both Industrial and off highway hydraulic systems
Recommended for both Industrial and off highway hydraulic systems, where extreme operating conditions are encountered. Can also be used in hydrostatic drives, power steering systems, brake systems and other applications where products of this type and specification required.
This product is the only acceptable transmission fluid for NAG2V Sport transmissions and the 7GTronic models: W7A 700 / NAG2. Additional applications include 5-speed models that employ acontrolled torque converter lockup clutch for rear-wheel drive vehicles, which are also fitted in certainChrysler models. These model designations are: 722.6 / W5A 580 / NAG1.
Morris Liquimatic DS is designed for all General Motors applications requiring Dexron® VI and provides protection for 2006 models and newer. Transmissions include the following Aisin Warner models: AW TF-80SC / SD, AWF21, AF40-6, AM6, AW6A-EL, TF-81SC, AF21, GA6F21WA (Mini). Suitable for use in automatic transmissions fitted to hydrid electric vehicles.
Morris Liquimatic DII is recommended for use in all applications where a Dexron® IID is specified, including: automatic transmissions, powershift transmissions, fluid drives, torque converters, power steering units, motorcycle suspension forks, hydraulic systems, brake boosters, transfer boxes, PTOs, hydrostatic drives, etc.
Liquimatic D46 is designed to provide outstanding hydraulic system efficiency, clean performance, excellent oxidation and thermal stability. The high level of anti-wear properties and excellent film strength result in a high degree of equipment protection that not only results in fewer breakdowns but helps improve production capacity.
Morris Liquimatic 33G is recommended for use in all Ford automatic transmissions where a M2C 33G qualified product has been specified. Other transmission applications include Borg Warner, ITL (JCB) and certain Land Rover units.
A high performance green mineral based brake and clutch, hydro-pneumatic suspension & hydraulic system oil. This grade is designed to protect against pump wear and provide good rates of flow throughout the system even in the most extreme temperatures. Should not be mixed with synthetic brake fluids.
Largo P1 is a highly refined, low odour, low viscosity mineral oil possessing excellent lubricating properties, good
Largo Mineral Oils are a versatile range of oils which can be used wherever a straight mineral oil has been specified. Particularly recommended for lightly loaded industrial equipment with circulating systems, oil baths, automatic lubricators, wick oilers, spray, splash and mist lubricators
K99 is a premium quality, water resistant grease for use in industrial and marine applications where the presence of water and humid atmospheres can effect lubricating performance and be detrimental to the protection of parts from corrosion. K99 is suitable for plain and antifriction bearings.
Magnaplex K982 an aluminium complex grease specifically formulated for use on open gears. This product has high load carrying and adhesive characteristics, which not only allow it to be used on gears with circumferential speeds in excess of 20m/sec., but also where exceptionally high loads and slow sliding speeds are encountered. It is free of bitumen, solvents and other components, which are hazardous
K968 is a premium quality, water resistant grease for use in food processing environments where incidental food contact may occur.