Order Hotline: 01782 410381
Tygris IS93 Crack Detector Developer No 3 (Part 3 of a 3 part non-destructive testing system)
TYGRIS Stripeline Marking Paint White is a solvent based paint used for applying semi-permanent markings to most hard surfaces, inside or outside. Used inverted with a handheld or wheeled applicator, this paint is rapid drying and has good resistance to abrasion and chemicals. Available in 7 colours for safety and legal purposes.
Largo Mineral Oils are a versatile range of oils which can be used wherever a straight mineral oil has been specified. Particularly recommended for lightly loaded industrial equipment with circulating systems, oil baths, automatic lubricators, wick oilers, spray, splash and mist lubricators
Graphited lubricating oil for kiln for car bearings and other kiln components
R260 High strength contact adhesive in non-chlorinated form
PRECISION Solvent Tool & Electronics Cleaner is a non-chlorinated, medium to fast evaporating, light duty cleaner for use on metallic and plastic surfaces, removing general grime, and also greases and oils in heavier duty applications. Can be used on electrical equipment once the supply has been isolated.
IS91 (Part of a 3 part non-destructive testing system). Part 1 is an effective slow-drying solvent cleaner
IS92 Dye Penetrant (Part 2 of a 3 part non-destructive testing system)
TYGRIS Stripeline Marking Paint Blue is a solvent based paint used for applying semi-permanent markings to most hard surfaces, inside or outside. Used inverted with a handheld or wheeled applicator, this paint is rapid drying and has good resistance to abrasion and chemicals. Available in 7 colours for safety and legal purposes.
Faracut HS3 is a highly refined cutting oil with special lubricity additives to enhance cutting without the use of Chlorine, Sulphur or Phosphorus
Developed to offer improved performance capable of meeting the demands of vane pumps used in biogas digestion plants. Formulated from high quality Group II base oils and a combination of ashless additives that provide excellentoxidation stability, protection against rust & corrosion, low foaming and excellent demulsibility.
TYGRIS Super Lube Extreme Pressure is a PTFE reinforced lubricant with excellent penetrating properties. De-waters, lubricates, releases and protects.
Morris K65 is an industrial, extreme temperature, medium consistency plain and rolling bearing grease for applications at operating temperatures up to 600°C.
Typical applications include: kiln car bearings, furnace doors, drying tunnel mechanisms and other applications where high temperatures are encountered.
TYGRIS Leak Detector is an inoffensive, non-corrosive foam used in the inspection of pipework to prevent leaks passing unnoticed with potentially dangerous effects. It will detect any leaks instantly and is harmless to most materials as well as being safe to use with most gases.
TYGRIS Anti-Static Foaming Cleaner is designed for use around the workplace where the build up of dust is undesirable, its anti static properties dissipating static electrical charges effectively. For use on all water resistant, non porous surfaces, the foaming action aids in clinging to vertical surfaces.
A specially developed grease using a semi-synthetic blend of base oils manufactured with a bentone thickener containing a high level of graphite and synergistic EP-additives and antioxidants designed particularly for hydraulic hammer lubrication, pin and bush type of applications on large earth moving and general off-road heavy plant machinery.
K90 Calcium Sulphonate Complex Grease has been developed as a high performance grease for constructionplant such as bulldozers, scrapers, loading shovels and dump trucks where it will give outstanding performance.It is also recommended for use in industrial equipment operating at high temperatures or exposed to salt water.
The Alto range of machine oils contain anti-rust and antioxidant additives (R&O) that are blended into high quality mineral oils that possess good natural lubricating properties enhanced by modern refining techniques. They have good viscosity indices and separate from water cleanly and quickly.
A range of gear oils, combining high quality mineral oils and extreme pressure (EP) additives for use in industrial gear systems. Lodexol Industrial Gear Oils have high load carrying capability and are formulated to protect against wear, oxidation, foam, rust and corrosion.
Water Glycol based hydraulic fluid, VG46
Morris Airforce VPO HV is recommended for use in a wide range of positive displacement vacuum pumps, including rotary vane, lobe, screw and reciprocating designs.
A range of gear oils, combining synthetic base fluids and powerful extreme pressure (EP) additives, for use in industrial gear systems. Lodexol FS Industrial Gear Oils are formulated to protect against wear, oxidation, foam, rust and corrosion.The synthetic base fluids used in this range have outstanding thermal stability ensuring that gear systems running at elevated temperatures have the
A low oil content semi-synthetic cutting fluid, incorporating the latest in formaldehyde and boron-free technology.
Crystal White Oils are highly refined medicinal grades, that are water white in colour, odourless and tasteless. These products are extremely stable and will not break down or form sludges. Category Code: H1, HX-1, 3H
Specially formulated ash-less compressor oil for the lubrication of both reciprocating and rotary air compressors.
Service life of up to 4000 hours in reciprocating compressors.
Petro-Canada Lubricants’ ENDURATEX™ EP Gear Oils are premium quality, extreme-pressure lubricants designed for use in enclosed industrial gear drives operating under normal, heavy or shock-loaded conditions.
Morris Heavy Liquid Paraffin is a highly refined medicinal white oil grade that is water white in colour, odourless and tasteless. This product is extremely stable and will not break down or form sludges.
Invert emulsion type fire resistant hydraulic fluid, VG46
AIR FORCE 8000 FS is a range of ester based, fully synthetic, compressor lubricants designed specifically to meet the requirements of rotary screw compressors including modern, variable speed types. They incorporate the latest additive technology and have proved to be far superior in performance to conventional oils under all conditions.
Hard smooth non-porous grease with good resistance to oxidation. Formulated from a soap thickened mineral oil Premier Block Grease exhibits only slight changes in consistency at elevated temperatures.
A range of fully synthetic gear oils, manufactured from polyalkylene glycol (PAG) fluids and specialised extreme pressure (EP) additives, to provide outstanding protection at all temperatures to industrial gear systems. Unlike conventional gear oils PAG fluids maintain an effective lubricating film over a wide operating temperature range, from artic conditions to high thermal loadings. PAG Fluids
Premier Ease Release Oil is specially blended, highly versatile, quality neat oil with surfactant which is ideal for use on metal, timber, other formwork materials and coatings
A range of gear oils, combining synthetic base fluids and powerful extreme pressure (EP) additives, for use in industrial gear systems. Lodexol FS Industrial Gear Oils are formulated to protect against wear, oxidation, foam, rust and corrosion.
These products contain additives to prevent rust and corrosion that can occur in systems that are vulnerable to condensation between operations. Anti-foam additives are also incorporated to encourage the release of entrained air and to collapse foam. This is vitally important as air bubbles or foam can reduce the effectiveness of the heat transfer system.Atonal Heat Transfer Oils also contain
Magnol HVI46 High Viscosity Index Oil is recommended for both Industrial and off highway hydraulic systems, where extreme operating conditions are encountered. Can also be used in hydrostatic drives, power steering systems, brake systems and other applications where products of this type and specification required.
A range of fully synthetic gear oils, manufactured from polyalkylene glycol (PAG) fluids and specialised extreme pressure (EP) additives, to provide outstanding protection at all temperatures to industrial gear systems. Unlike conventional gear oils PAG fluids maintain an effective lubricating film over a wide operating temperature range, from artic conditions to high thermal loadings.
Magnaplex K982 an aluminium complex grease specifically formulated for use on open gears. This product has high load carrying and adhesive characteristics, which not only allow it to be used on gears with circumferential speeds in excess of 20m/sec., but also where exceptionally high loads and slow sliding speeds are encountered. It is free of bitumen, solvents and other components, which are hazardous
Atonal Heat Transfer Oils are manufactured with high quality mineral oils and incorporate powerful oxidation inhibitors to ensure the necessary thermal stability for high working temperatures over long periods. These products contain additives to prevent rust and corrosion that can occur in systems that are vulnerable to condensation between operations. Anti-foam additives are also incorporated
Liquimatic VG5 is a low viscosity hydraulic oil blended from high quality mineral oils and a balanced additive system. It possesses excellent lubricating properties, with reduced oil mist and demulsification performance.
K15is a black residual lubricant, which has been compounded with fatty agents to give extra oiliness and water resistance. This tough lubricant has tremendous film strength and adhesion to metal surfaces. It acts as a cushion between moving parts, providing outstanding protection against wear, rust, corrosion, and quietening of noisy gears. This lubricant is not dislodged from metal parts by water
Clean Lubricant for the release of seized and rusted components
Recommended for both Industrial and off highway hydraulic systems, where extreme operating conditions are encountered. Can also be used in hydrostatic drives, power steering systems, brake systems and other applications where products of this type and specification required.
SUPERCUT G has multi-metal compatibility, tolerance to tramp oil and bacterial degradation , helps reduce tool wear and gives excellent surface finishes on many different alloys. Supercut G has been developed specifically for use with the more difficult to machine alloys and aluminium. Carefully selected corrosion inhibitor systems ensure stain free performance on most metals including steels
K968 is a premium quality, water resistant grease for use in food processing environments where incidental food contact may occur.
This semi fluid, soft Lithium based greases has been specially designed for use in centralised lubrication systems. It is easily pumped, has superb oxidation resistance, exceptional mechanical stability, good water resistance and rust protection and can be used over a wide range of operating temperatures.It conforms to all leading bearing manufacturers specifications for general purpose
Hard metals such as tungsten carbide contain significant amounts of Cobalt in their make-up. It has been shown* that if released into the work place, Cobalt poses a health hazard to machine operators. If conventional synthetic grinding fluids are used to grind carbides, Cobalt is automatically released into the fluid and builds up to harmful levels. A specialist product is therefore required to prevent
A range of industrial gear oils, combining high quality mineral oils and extreme pressure (EP) additives, intended for use in industrial gear systems of the spur, helical and straight and spiral bevel types. Lodexol Industrial Gear Oils have high load carrying capability and ensure 'clean’ gear performance under conditions of high temperature and oxidation. Additionally these grades provide strong protection against wear, oxidation, foam, rust and corrosion.
A range of gear oils, combining synthetic base fluids and powerful extreme pressure (EP) additives, for use in industrial gear systems. Lodexol FS Industrial Gear Oils are formulated to protect against wear, oxidation, foam, rust and corrosion.The synthetic base fluids used in this range have outstanding thermal stability ensuring that gear systems running at elevated temperatures have the correct
A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater. Excellent anti-wear and EP properties provide protection against wear in the most demanding of systems.
Supergrind SW is a fully synthetic water-mix grinding fluid that forms a true solution when diluted with water. Supergrind SW is formulated to have a very low foaming tendency, even when used with soft water.
Liquisafe 46 is a high quality fire resistant hydraulic fluid blended with high and low molecular weight polyalkylene glycols in a stable water solution. The formulation includes special chemical additives that inhibit the formation of rust in the system, and provide anti-wear properties equal to that of mineral hydraulic oils. This product is compatible with all seals normally found in systems
Supercut 8000 yields multi-metal compatibility, high tolerance to tramp oil and excellent surface finishes on many different alloys. The product has been specifically developed for use witnthe more difficult to machine alloys, whilst carefully selected corrosion inhibitor systems ensure stain free performance3 on steels, brasses and aerospace aluminium alloys.
High viscosity index hydraulic oil, formulated from high quality minerals oils and the latest anti-wear technology. Ideal for hydraulic systems subjected to the very extremes of operating conditions and temperatures, from frozen food stores (-20oC) to industrial hydraulic systems at elevated temperatures and off highway equipment.Recommended for both Industrial and off highway hydraulic systems, where
Arcato R refrigeration oils are designed for use in refrigeration and air conditioning system compressors. The range is manufactured from high quality naphthenic mineral oils, providing the stability and low temperature characteristics necessary for the correct lubrication and operation for this type of equipment.
Largo P1 is a highly refined, low odour, low viscosity mineral oil possessing excellent lubricating properties, good
A range of gear oils, combining high quality mineral oils and extreme pressure (EP) additives for use in industrial gear systems
Morris Lubricants Transformer Oil is a highly refined naphthenic product for use solely in oil filled transformers and other electrical equipment. The base stock and refining process has been specifically chosen to produce a long life product free of oxidation and sludging tendencies.
A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater.
Morris Cora B is suited to general machining operations on ferrous metals up to medium tensile steels and non-ferrous metals. The additive system ensures improved surface finish and tool life whilst remaining non-staining to copper and its alloys.
Contains high levels of extreme pressure and lubricity additives thereby making it suitable for many arduous applications on hardened ferrous metals, high alloy steels and stainless. Despite its high EP loading Marcia T is a light coloured, low odour product, and hence has better operator acceptability than traditional products based on sulphurised fats.The high levels of EP and lubricity additives
K62 is a premium quality non-melting grease for use in plain and anti-friction bearings subjected to elevated temperatures. The consistency of the grease remains stable throughout a wide temperature range.
Through its exceptional balance of cooling and lubricating properties, it has the outstanding ability to produce ultra-fine surface finishes. The product may be used on all metal types with the exception of hard metal carbides, and is especially recommended for non-metals, composites and glasses.Supergrind Ultra is ideal for surface grinding and roll grinding and may be used for ultra high speed machining
Formulated for applications involving high removal rates of ferrous and non-ferrous materials. Due to the unique formulation, this product combines properties which ensure extremely good flushing performance coupled with low foaming characteristics that allow the fluid to stay clear and clean.Supergrind MP is part of the new generation of grinding fluids which are nitrite, mineral oil, sulphur, chlorine
K3 is a premium quality, water resistant grease for use in industrial and marine applications where the presence of water and humid atmospheres can effect lubricating performance and be detrimental to the protection of parts from corrosion. K3 is further enhanced with a special additive which provides additional protection and lubrication in areas where excessive levels of water are prevalent such
Specially formulated ‘2000 hour’ fluid developed to meet the requirements of hydrovane compressors and other similar vane compressors, ensuring long, trouble-free compressor life, wherever a fluid of this viscosity is recommended by the manufacturer.
Specially selected base oils and additives ensure a low misting potential in use, whilst also ensuring excellent flushing of honing stones and excellent swarf separation. Marcia H may also be utilised in a number of light to medium duty applications involving free cutting ferrous alloys.
Specially formulated range of ashless compressor oils for the lubrication of both reciprocating and rotary air compressors.
A biostable, semi-synthetic cutting fluid designed for use in applications where extra lubricity and extreme pressure properties are required, such as: Sawing of aluminium and aerospace alloys. Broaching. Screw cutting of alloy steels. Deep hole boring. Spray applied gun drilling Forming.
Supergrind Plus is a fully synthetic grinding fluid offering exceptional performance and extended sump life in most grinding operations. It is formulated using the latest technology and offers excellent corrosion protection, stable solutions, low foaming tendency, excellent fines separation and resistance to degradation by bacteria or fungi. The synthetic formulation also alleviates &ldquowheel glazing
A mineral based zinc free ISO VG 15 hydraulic oil for use in certain powersteering and brake activator systems, including JCB where specified.
Supercut 4000 is a micro-emulsion metalworking fluid is readily miscible with most mains water to produce a translucent green emulsion that is suited to a wide variety of applications. Supercut 4000 has excellent lubricity, is low foaming, offers excellent workpiece visibility, excellent resistance to bacterial degradation and extended sump life.
This is a low viscosity water white mineral oil specially prepared as a reference fluid for diesel injection testing equipment. A fluid such as Seria Fuel Pump Test Oil is produced to very close specification limits, which are essential for accurate and consistent results in test equipment. It is not possible to perform these testing procedures with diesel fuels that can vary considerably in viscosity