Brand Selector

Terralus SB46 is a fully synthetic biodegradable hydraulic oil that may be used in environmentally sensitive locations such as agricultural land, forest floor, ground near water courses and reservoirs and construction sites. Terralus SB46 is based on synthetic esters to reduce gumming and high temperature oxidation, while improving low temperature fluidity. The formulation also contains approved performance additives, to reduce corrosion, wear and extend equipment life.

Milking Machine Vacuum Pump Oil is a high quality vacuum pump oil specially developed for use in milking machines. This oil is formulated from specially selected highly refined mineral oils. Milking machine reliability is of the utmost importance in dairy management and therefore this product has been designed with the following outstanding features.

Terralus Viroclean is a non-toxic, water-based, biodegradable cleaner. The concentrate is mildly alkaline to aid dirt removal but contains no petroleum or chlorinated solvents.

Fork Oils are made from selected high quality mineral oils and performance additives, ensuring compatibility with all seals and other fork components. High Viscosity Index ensures smooth predictable damping over a wide temperature range

Astra Slideway Lubricants have been specifically developed for the lubrication of machine tool slideways and tables. They have been formulated from high quality mineral oil, performance additives and incorporate a tackifier to ensure that the lubricant adheres to the moving parts at all times. The performance additives provide outstanding resistance to oxidation, corrosion and wear and eliminate stick

Race 4 TT 10W-40 is recommended for all turbo-charged and naturally aspirated racing engines and super bikes or where the manufacturer specifies an oil of this type and specification.

This is a low viscosity water white mineral oil specially prepared as a reference fluid for diesel injection testing equipment. A fluid such as Seria Fuel Pump Test Oil is produced to very close specification limits, which are essential for accurate and consistent results in test equipment. It is not possible to perform these testing procedures with diesel fuels that can vary considerably in viscosity

This range is mineral oil free and has been specially developed to meet concern over the inevitable spills, leakages and total system losses that frequently occur from burst hoses on hard worked hydraulic equipment. This is particularly important if hydraulic equipment is working where soil or water contamination is a possibility. In addition to the problem of mineral oil pollution, there is now evidence

Specially formulated ‘2000 hour’ fluid developed to meet the requirements of hydrovane compressors and other similar vane compressors, ensuring long, trouble-free compressor life, wherever a fluid of this viscosity is recommended by the manufacturer.

A high performance green mineral based brake and clutch, hydro-pneumatic suspension & hydraulic system oil. This grade is designed to protect against pump wear and provide good rates of flow throughout the system even in the most extreme temperatures. Should not be mixed with synthetic brake fluids.

Aqua Max 2 is approved by the NMMA to TC-W3&trade and has been developed to meet the need for a specialised ash free outboard motor oil for today’s high powered multi-cylinder two cycle engines. The ashless formulation provides an excellent lubricating film that leads to improved engine performance and reduced wear for engine components even if temporary overheating occurs. Aqua Max 2 provides

Supercut 4000 is a micro-emulsion metalworking fluid is readily miscible with most mains water to produce a translucent green emulsion that is suited to a wide variety of applications. Supercut 4000 has excellent lubricity, is low foaming, offers excellent workpiece visibility, excellent resistance to bacterial degradation and  extended sump life.  

Multivis ADT VA 5W-30 is a synthetic technology lubricant, designed for use in the latest technology engines, including those fitted with exhaust gas after-treatment devices.

Terralus UTTO is a biodegradable multi-functional tractor transmission fluid that can be used in transmissions, hydraulics, oil immersed (wet brakes), PTOs and final drive systems. The product has been carefully formulated from raw materials that have demonstrated a level of biodegradability that makes it an ideal candidate for use where environmental impact must be reduced to a minimum.

PURITY FG Chain Fluids are recommended for lubricating all types of drive and conveyor chains as well as bearings found on food processing machinery.
They may be applied by brush or drip feed as well as by centralized lubrication systems.

PURITY FG Chain Fluids may be applied at temperatures up to 200°C / 392°F.  However, at temperatures above 150°C / 302°F, equipment should be re-oiled more frequently.

Morris Lodexol XFS 75W-90 is based on synthetic oil technology and will protect limited slip differentials fitted to high performance cars and motorsport models. Additionally this grade may be used in various other automotive drive axles, where a SAE 75W/90, API GL5 lubricant is required.

Groundforce SAE 10W-40 is designed to cope with the difficult conditions found in four stroke diesel and petrol engines fitted to horticultural, garden machinery and stationary equipment where multigrade oils are recommended. The oil is blended from solvent refined base stocks and performance additives to control vanish, soot dispersancy, low temperature sludge, oxidation, rust and corrosion. Groundforce SAE 10W-40 is recommended for all year use.

Versimax HD5 10W-40 is formulated in semi synthetic base fluids, to improve cold start fluidity and circulation, while also protecting components under severe load, when running at high temperatures.

Groundforce 2T has been developed to meet the requirements of small high revving air cooled 2-stroke engines in horticultural and agricultural equipment. The lubricating film is strong enough to prevent engine lock up in moments of temporary overheating and provides maximum film strength and anti-wear performance. Reduced smoke and clean burning characteristics mean that deposit formation in the ports

A mineral based zinc free ISO VG 15 hydraulic oil for use in certain powersteering and brake activator systems, including JCB where specified.     

Multivis MLR 10W-60 is recommended for all turbo-charged and naturally aspirated petrol and diesel engines, for ordinary road use and also for car racing, endurance events, rallying and all other types of motor sport.

Morris Servol 10W/40 is suitable for use in passenger cars, light commercial vehicles, horticultural equipment, etc., where a grade of this type and performance level is required.

Morris XEP 80W-90 has been specifically designed for use in limited slip differentials requiring the following viscosity grades 80W-90, 85W-90 or 90 grade lubricants.

Morris Race C30 is an engine oil manufactured from high quality first pressing castor oil. Synthetic base fluids are incorporated to achieve SAE 30 classification.

Morris Race Gear Oil has an extremely low fluid friction and does not rob power at start up or during racing. Recommended for use in all types of racing and competition gearboxes, where a SAE 75W-90 or SAE 10W-40 is specified.

Multivis 5W-30 is a semi-synthetic multigrade engine oil specially formulated to meet the superior performance and fuel efficiency requirements of modern engines requiring low viscosity oils. Enhanced oil flow and film strength give essential protection during start-up. Advanced additive technology provides long-term benefits including reduced wear on critical valve-train components in modern multi

Supergrind Plus is a fully synthetic grinding fluid offering exceptional performance and extended sump life in most grinding operations. It is formulated using the latest technology and offers excellent corrosion protection, stable solutions, low foaming tendency, excellent fines separation and resistance to degradation by bacteria or fungi. The synthetic formulation also alleviates &ldquowheel glazing

Morris Race C40 is recommended for four stroke grass-track and classic machines where castor-based products are preferred. This grades may also be suitable for premix use in two stroke applications with both petrol and methanol fuels.

This range is mineral oil free and has been specially developed to meet concern over the inevitable spills, leakages and total system losses that frequently occur from burst hoses on hard worked hydraulic equipment. This is particularly important if hydraulic equipment is working where soil or water contamination is a possibility. In addition to the problem of mineral oil pollution, there is now evidence

Morris Multivis CST SS 10W-40 is a semi-synthetic engine oil manufactured from advanced Group II and Group III base fluids and the latest additive technology.

A biostable, semi-synthetic cutting fluid designed for use in applications where extra lubricity and extreme pressure properties are required, such as: Sawing of aluminium and aerospace alloys. Broaching. Screw cutting of alloy steels. Deep hole boring. Spray applied gun drilling Forming.

Specially formulated range of ashless compressor oils for the lubrication of both reciprocating and rotary air compressors.

A range of gear oils, combining synthetic base fluids and powerful extreme pressure (EP) additives, for use in industrial gear systems. Lodexol FS Industrial Gear Oils are formulated to protect against wear, oxidation, foam, rust and corrosion.The synthetic base fluids used in this range have outstanding thermal stability ensuring that gear systems running at elevated temperatures have the correct

Specially formulated range of ashless compressor oils for the lubrication of both reciprocating and rotary air compressors.

F410 is a NSF: H1 registered dry film lubricant engineered for use in food processing environments, formulated for use where conventional oils and greases are undesirable due to their dirt attracting nature.   Also suitable for Packaging, Pharmaceutical and other cleanroom environments.

Multivis V 0W-20 is a low viscosity engine oil providing not only the potential for fuel savings, but a high level of component protection under a wide range of operating conditions in passenger cars

Groundforce 2HSS is a top quality synthetic boosted 2-stroke oil, utilising the latest performance additive technology, for protection and performance.

Terralus BVG Hydraulic Oils are a range of readily biodegradable hydraulic oils manufactured to meet the requirements of hydraulic systems in industrial, horticultural and earth moving equipment. This range is mineral oil free and has been specially developed to meet concern over the inevitable spills, leakages and total system losses that frequently occur from burst hoses on hard worked hydraulic

Agrimax® HY is a hydraulic/transmission fluid formulated with high quality mineral oils and specialised additives for use in agricultural and plant equipment, where the Case MS1207/1209 specifications are called for.

Ankorsol is a specially formulated corrosion preventative particularly suited for protecting both ferrous and non-ferrous metals from corrosion in water and/or glycol systems. Ankorsol provides lubricity to aid lubrication of pumps etc. whilst also helping to prevent furring or scaling of pipes. Its unique formulation ensures corrosion protection is possible at relatively low usage concentrations

Specially selected base oils and additives ensure a low misting potential in use, whilst also ensuring excellent flushing of honing stones and excellent swarf separation. Marcia H may also be utilised in a number of  light to medium duty applications involving free cutting ferrous alloys.

Specially formulated ‘2000 hour’ fluid developed to meet the requirements of hydrovane compressors and other similar vane compressors, ensuring long, trouble-free compressor life, wherever a fluid of this viscosity is recommended by the manufacturer.

High viscosity index hydraulic oil, formulated from high quality minerals oils and the latest anti-wear technology. Ideal for hydraulic systems subjected to the very extremes of operating conditions and temperatures, from frozen food stores (-20oC) to industrial hydraulic systems at elevated temperatures and off highway equipment.Recommended for both Industrial and off highway hydraulic systems, where

Premier HT Plus 10W-30 is a multifunctional transmission and hydraulic fluid for tractors and plant.

High viscosity index hydraulic oil, formulated from high quality minerals oils and the latest anti-wear technology. Ideal for hydraulic systems subjected to the very extremes of operating conditions and temperatures, from frozen food stores (-20oC) to industrial hydraulic systems at elevated temperatures and off highway equipment.Recommended for both Industrial and off highway hydraulic systems, where

K3 is a premium quality, water resistant grease for use in industrial and marine applications where the presence of water and humid atmospheres can effect lubricating performance and be detrimental to the protection of parts from corrosion. K3 is further enhanced with a special additive which provides additional protection and lubrication in areas where excessive levels of water are prevalent such

Compound Steam Cylinder Oils 460, are for use in most Locomotives and Stationary engines working with either saturated or superheated steam.

Workshop PRO All Seasons Screen Wash is a specially formulated screen wash concentrate that is made for adding to water in vehicle washer bottles. It cuts through dirt and grime from roads and traffic leaving a clean and sparkling smear free windscreen. The special formulation helps wiper blades glide smoothly over the screen and eliminates annoying judder. Suitable for all year round use.

Formulated for applications involving high removal rates of ferrous and non-ferrous materials. Due to the unique formulation, this product combines properties which ensure extremely good flushing performance coupled with low foaming characteristics that allow the fluid to stay clear and clean.Supergrind MP is part of the new generation of grinding fluids which are nitrite, mineral oil, sulphur, chlorine

This oil is for use in most Locomotives and Stationary engines working with either saturated or superheated steam. It is produced from special cylinder stock treated with fatty compounds and particularly Tallow to provide superior lubrication even if wet conditions are encountered. The fatty compounds form emulsions which spread the oil on the internal surfaces, providing a strong lubricating film

Advanced food grade lubricants formulated to deliver superior performance and longer service life

NEVASTANE XS 80 is an EP multi purpose grease, recommended for various applications in the food and food related industry operating under severe conditions (high load, high temperature, water, dust).

A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater.

A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater. Excellent anti-wear and EP properties provide protection against wear in the most demanding of systems.

Through its exceptional balance of cooling and lubricating properties, it has the outstanding ability to produce ultra-fine surface finishes. The product may be used on all metal types with the exception of hard metal carbides, and is especially recommended for non-metals, composites and glasses.Supergrind Ultra is ideal for surface grinding and roll grinding and may be used for ultra high speed machining

Ring Free XHD monogrades are high quality engine oils particularly recommended for haulage, plant contractors and certain mixed fleet operations. They are manufactured from high quality mineral oils and provide protection against wear, rust and corrosion. The technology used in these oils gives excellent results in 4-stroke turbo-charged and naturally aspirated indirect injected diesel engines and

Morris Multivis ADT C-ONE 5W-30 is a low-SAPS (Sulphur, Ash, Phosphorus) fully synthetic multigrade engine oil specially formulated to meet the superior performance and fuel efficiency requirements of modern engines requiring low viscosity oils for gasoline and diesel engine applications. Multilife C-ONE 5W-30 has been formulated to protect sensitive exhaust after-treatment devices.

Non-abrasive cleaner and degreaser

Ring Free XHD monogrades are high quality engine oils particularly recommended for haulage, plant contractors and certain mixed fleet operations. They are manufactured from high quality mineral oils and provide protection against wear, rust and corrosion. The technology used in these oils gives excellent results in 4-stroke turbo-charged and naturally aspirated indirect injected diesel engines and

Morris Lodexol 80W-90 Gear Oil is designed for use in a wide variety of applications, including: manual gearboxes, transaxles, transfer boxes, axles, steering boxes, swivel pin housings, reduction hubs, oil lubricated bearings, power take-offs, hoist/winch gearboxes, slew gearboxes, chain drives, track drives, track rollers and idlers, etc.

Morris Liquimatic 33G is recommended for use in all Ford automatic transmissions where a M2C 33G qualified product has been specified. Other transmission applications include Borg Warner, ITL (JCB) and certain Land Rover units.

Terralus CBO oil is specially formulated to overcome the environmental concern, of long term potentially harmful ecological effects of mineral based oils in total loss systems, particularly in the agricultural, forestry, horticultural and water industries. The biodegradable products used in the formulation: -&bull Reduce wear on cutter bar chain and sprockets&bull Reduce build up of foam&bull Provide

Ring Free XHD monogrades are high quality engine oils particularly recommended for haulage, plant contractors and certain mixed fleet operations. They are manufactured from high quality mineral oils and provide protection against wear, rust and corrosion. The technology used in these oils gives excellent results in 4-stroke turbo-charged and naturally aspirated indirect injected diesel engines and

K62 is a premium quality non-melting grease for use in plain and anti-friction bearings subjected to elevated temperatures. The consistency of the grease remains stable throughout a wide temperature range.

A solvent deposited, medium term rust preventative with water displacing properties providing a thin grease film when dry. Ankor C has good operator acceptability due to its low odour and ease of application by dipping, brushing or spraying

Workshop Pro Surface Conditioner is a special blend of silicone, solvents and cleaners. It has been designed as a multipurpose product that cleans, restores and protects surfaces at the same time.

NEVASTANE XS 320 is an extreme pressure grease dedicated to the lubrication in food industry under very severe conditions: water, high load, high temperature, dust…

Contains high levels of extreme pressure and lubricity additives thereby making it suitable for many arduous applications on hardened ferrous metals, high alloy steels and stainless. Despite its high EP loading Marcia T is a light coloured, low odour product, and hence has better operator acceptability than traditional products based on sulphurised fats.The high levels of EP and lubricity additives

Agrimax® STF60 is a multifunction fluid formulated with high quality base oils and specialised additives for use in the transmission and hydraulics of agricultural, plant and material handling equipment

Versimax HD3 20W-50 has high levels of detergency /dispersancy to reduce combustion chamber deposits and ring sticking, as well as preventing excessive soot thickening. This grade will protect from wear, rust and corrosion.

Morris Cora B is suited to general machining operations on ferrous metals up to medium tensile steels and non-ferrous metals. The additive system ensures improved surface finish and tool life whilst remaining non-staining to copper and its alloys.

Steam Car Compound 1000 Cylinder Oil is for use in most Locomotives and Stationary engines working with either saturated or superheated steam.

Advanced mineral oil based gear oil providing total driveline protection in gearboxes and differentials. Meets the following specifications:

Morris Agrimax® UTTO 10W-40 has been designed to cover the majority of agricultural lubrication requirements, whilst maintaining a reduced inventory. This grade is formulated with the latest additive technology and high quality mineral oils to produce a universal lubricant for tractors, combines and agricultural machinery subjected to the severest of operating conditions.

Morris Liquimatic Super ATF is an automatic transmission fluid blended from high quality mineral oil, synthetic base fluids and a balanced additive system. This grade has superior performance in terms of frictional characteristics, seal compatibility, oxidation stability, low temperature fluidity and resistance to high temperatures encountered during severe operating conditions.

A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater. Excellent anti-wear and EP properties provide protection against wear in the most demanding of systems.

A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater.

NEVASTANE XMF greases are recommended for the lubrification of food and beverage processing machinery operating under severe conditions such as loaded gears and bearings, seamers, filling machines, conveyors, mixers.

Morris Lodexol MTF 75W-80 has exceptionally good high temperature stability ensuring maximum gear set protection, even under prolonged arduous operation.

Recommended for both Industrial and off highway hydraulic systems, where extreme operating conditions are encountered. Can also be used in hydrostatic drives, power steering systems, brake systems and other applications where products of this type and specification required.

Morris Lubricants Transformer Oil is a highly refined naphthenic product for use solely in oil filled transformers and other electrical equipment.  The base stock and refining process has been specifically chosen to produce a long life product free of oxidation and sludging tendencies.

Morris Lubricants - Multivis ADT C2 5W-30 is a mid-SAPS synthetic based multigrade engine oil formulated to meet the superior performance and fuel efficiency requirements of engines requiring low viscosity oils for gasoline and diesel engine applications.

Ring Free XHD monogrades are high quality engine oils particularly recommended for haulage, plant contractors and certain mixed fleet operations. They are manufactured from high quality mineral oils and provide protection against wear, rust and corrosion. The technology used in these oils gives excellent results in 4-stroke turbo-charged and naturally aspirated indirect injected diesel engines and

A range of fully synthetic gear oils, manufactured from polyalkylene glycol (PAG) fluids and specialised extreme pressure (EP) additives, to provide outstanding protection at all temperatures to industrial gear systems. Unlike conventional gear oils PAG fluids maintain an effective lubricating film over a wide operating temperature range, from artic conditions to high thermal loadings. PAG Fluids

A range of high quality mineral oil based hydraulic oils, incorporating ashless additive technology and available in a variety of viscosity grades. They are rust and oxidation inhibited and will provide protection against corrosion even in the presence of seawater. Excellent anti-wear and EP properties provide protection against wear in the most demanding of systems.

Morris Lodexol SS 75W-90 meets API GL4 and API GL5 classifications, enabling grade rationalisation and reduced risk of misapplication. The semi-synthetic formulation also has good cold start fluidity, ensuring fast circulation around gear systems, even when the oil is cold.

Developed specifically for steam engines operating on the national rail network where true superheat conditions are experienced on long hauls

A range of gear oils, combining high quality mineral oils and extreme pressure (EP) additives for use in industrial gear systems

Largo P1 is a highly refined, low odour, low viscosity mineral oil possessing excellent lubricating properties, good

Durable coating for sealing and protecting

Arcato R refrigeration oils are designed for use in refrigeration and air conditioning system compressors. The range is manufactured from high quality naphthenic mineral oils, providing the stability and low temperature characteristics necessary for the correct lubrication and operation for this type of equipment.

High viscosity index hydraulic oil, formulated from high quality minerals oils and the latest anti-wear technology. Ideal for hydraulic systems subjected to the very extremes of operating conditions and temperatures, from frozen food stores (-20oC) to industrial hydraulic systems at elevated temperatures and off highway equipment.Recommended for both Industrial and off highway hydraulic systems, where

TFR is a heavy-duty vehicle cleaning liquid for cleaning bodies, alloy wheels, chassis, tilts and taut liners on commercial vehicles, cars, vans & bikes.

Liquisafe 46 is a high quality fire resistant hydraulic fluid blended with high and low molecular weight polyalkylene glycols in a stable water solution. The formulation includes special chemical additives that inhibit the formation of rust in the system, and provide anti-wear properties equal to that of mineral hydraulic oils. This product is compatible with all seals normally found in systems

Supercut 8000 yields multi-metal compatibility, high tolerance to tramp oil and excellent surface finishes on many different alloys. The product has been specifically developed for use witnthe more difficult to machine alloys, whilst carefully selected corrosion inhibitor systems ensure stain free performance3 on steels, brasses and aerospace aluminium alloys.

A range of gear oils, combining high quality mineral oils and extreme pressure (EP) additives for use in industrial gear systems. Lodexol Industrial Gear Oils have high load carrying capability and are formulated to protect against wear, oxidation, foam, rust and corrosion.

F404 is a general purpose food grade lubricant for use in and around food processing areas, for the lubrication of cables, chains, castors, hinges, bearings and pins.