Brand Selector

Terrain LS 80W-90 has been specifically designed for use in limited slip differentials and wet brake systems fitted to off-highway and agricultural equipment. where differential loadings are high and where a variety of operating conditions may be encountered.

Multitrans DCT is a premium multi-vehicle DCT fluid, formulated to provide the required levels of component protection and friction control, critical to the operational efficiency and longevity of dual clutch designs.

Morris Multitrans CVT is a high performance transmission fluid, designed for use in a wide variety of pushbelt type Continuously Variable Transmissions (CVTs), including Jatco and Aisin systems.

Recommended for both Industrial and off highway hydraulic systems, where extreme operating conditions are encountered. Can also be used in hydrostatic drives, power steering systems, brake systems and other applications where products of this type and specification required.

Recommended for both Industrial and off highway hydraulic systems, where extreme operating conditions are encountered. Can also be used in hydrostatic drives, power steering systems, brake systems and other applications where products of this type and specification required.

SUPERCUT 3000 is a micro-emulsion metalworking fluid that is readily miscible with most mains water producing a transparent blue emulsion that is suited to a wide variety of applications.

F402 is a NSF: H1 registered, spray-formulated, water resistant lubricant for use on roller and needle bearings and chains. Suitable for Food & Beverage, Packaging, Pharmaceutical and other cleanroom environments.

F404 is a general purpose food grade lubricant for use in and around food processing areas, for the lubrication of cables, chains, castors, hinges, bearings and pins.

F408 Chain Spray is a NSF: H1 registered food grade chain spray suitable for use within Food & Beverage, Packaging, Pharmaceutical and other cleanroom environments.  

F410 is a NSF: H1 registered dry film lubricant engineered for use in food processing environments, formulated for use where conventional oils and greases are undesirable due to their dirt attracting nature.   Also suitable for Packaging, Pharmaceutical and other cleanroom environments.

Multivis ECO-S 0W/20 is a high performance fully synthetic engine oil formulated to cope with the exacting demands of OEMs requiring low viscosity engine oils.

Description

K968 is a premium quality, water resistant grease for use in food processing environments where incidental food contact may occur.

Multivis V 0W-20 is a low viscosity engine oil providing not only the potential for fuel savings, but a high level of component protection under a wide range of operating conditions in passenger cars

Morris Lodexol XFS 75W-90 is based on synthetic oil technology and will protect limited slip differentials fitted to high performance cars and motorsport models. Additionally this grade may be used in various other automotive drive axles, where a SAE 75W/90, API GL5 lubricant is required.

Morris Race Gear Oil has an extremely low fluid friction and does not rob power at start up or during racing. Recommended for use in all types of racing and competition gearboxes, where a SAE 75W-90 or SAE 10W-40 is specified.

Workshop Pro White Spray Grease is a combination of a Calcium and Zinc based grease in an aerosol form offering good resistance to water and heat. The product also offers long lasting protection against corrosion.

Morris Multivis ECO FB 5W-20 is recommended for use where manufacturers specify an SAE 5W-20 complying with one of the following performance
levels. Ford WSS-M2C948-B, API SP, ACEA C5

Premier Lubricants Grindsol 495 Plus is a completely Amine free grinding fluid that forms a clear fluorescent solution.

Premier Marine Engine Oil is specifically formulated for use in boats requiring an API CC performance.

Multi-System Central Hydraulic Fluid is an advanced synthetic formulation for use in applications and vehicle systems that require the use of CHF 11S and CHF 202 fluids, both of which are registered trade marks of Deutsche Pentosin-Werke GmbH. This product may also be used in all applications that require the use of LHM Plus fluid.

This product is the only acceptable transmission fluid for NAG2V Sport transmissions and the 7GTronic models: W7A 700 / NAG2. Additional applications include 5-speed models that employ a
controlled torque converter lockup clutch for rear-wheel drive vehicles, which are also fitted in certain
Chrysler models. These model designations are: 722.6 / W5A 580 / NAG1.

Multivis ECO H 0W-16 is a high performance synthetic engine oil formulated to cope with the exacting
demands of OEMs requiring low viscosity engine oils. 

Manufacturers include Honda, Toyota, Mitsubishi, Nissan and Suzuki (Baleno (A1K412 SHVS), Ignis (ATK412 & ATK412 SHVS), Swift (A2LL412 & A2L412 SHVS)).

Multivis ECO V 0W-30 is an engine oil providing not only the potential for fuel savings but a high level of component protection under a wide range of operating conditions in passenger cars or light commercial vehicles.

Morris Lubricants Multivis ADT FD 5W-30 is a synthetic tehnology engine oil specially formulated to meet the superior performance and fuel efficiency requirements of the latest generation of Ford diesels.

TFR is a heavy-duty vehicle cleaning liquid for cleaning bodies, alloy wheels, chassis, tilts and taut liners on commercial vehicles, cars, vans & bikes.

Premier Ease Release Oil is specially blended, highly versatile, quality neat oil with surfactant which is ideal for use on metal, timber, other formwork materials and coatings

Faracut HS3 is a highly refined cutting oil with special lubricity additives to enhance cutting without the use of Chlorine, Sulphur or Phosphorus

Professional two-hand grease gun for use with eco-friendly 500g screw-in cartridges

Multivis ECO PC 0W-30 is a new generation passenger car engine oil formulated and developed for the latest PSA petrol and diesel engines, including hybrids

Lodexol MTFE 75W is a high performance, fully synthetic gear oil formulated and optimised for use in automotive gearboxes requiring a low viscosity SAE 75W. Lodexol MTFE 75W will provide potential fuel saving performance due to its low viscosity, which minimises friction in the gearbox. 

Petro-Canada PEERLESS™ greases are premium performance, multi-application greases formulated to reduce operating costs and provide extended protection in high temperature or wet operating conditions.

Hard smooth non-porous grease with good resistance to oxidation. Formulated from a soap thickened mineral oil Premier Block Grease exhibits only slight changes in consistency at elevated temperatures.           

Multivis ECO VB 0W-20 is a high performance fully synthetic engine oil formulated to cope with the exacting demands of OEMs requiring low viscosity engine oils, in particular Volkswagen Audi Group.

Magnol HVI46 High Viscosity Index Oil is recommended for both Industrial and off highway hydraulic systems, where extreme operating conditions are encountered. Can also be used in hydrostatic drives, power steering systems, brake systems and other applications where products of this type and specification required.

Versimax HD11 5W-30 is a top tier heavy duty diesel specific engine oil that has been designed to meet the necessary chemical limits required to maintain the efficiency of exhaust aftertreatment devices

Multitrans VTS is recommended for use in the automatic transmissions of commercial vehicles, buses, coaches, off-highway / construction equipment and passenger cars. The product may also be used in certain hydraulic applications, where a fluid of this type and specification is required. 

Morris Versimax HD14 10W-30 is designed for use in Euro 5 / Euro 6, Interim Tier 4 / Stage 3B / Tier 4 and Stage 4 diesel engines

Versimax HD12 15W-40 is designed for use in Euro 5 / Euro 6, Interim Tier 4 / Stage 3B / Tier 4 and Stage 4 diesel engines

Suitable to be used with Premier Lubricants 20 & 25 litre plastic drums using the included adaptor.

F406 is is a NSF: K2 registered quick drying solvent cleaner suitable for use within Food & Beverage, Packaging, Pharmaceutical and other cleanroom environments.

F412 is a NSF: H1 registered penetrating and release fluid which actively penetrates seized components. Enriched with anti-corrosion additives, a residual lubricating film adheres to the released part, facilitating re-assembly and helping prevent further corrosion.  Suitable for Food & Beverage, Packaging, Pharmaceutical and other cleanroom environments.

F414 is a NSF: H1 registered food grade belt dressing spray designed to reduce slippage and extend the life of drive belts, increasing transmitted power and improving efficiency and cost savings.

PROTEAN Seize Release+ is a NSF: H1 registered spray-formulated fast acting penetrating and dismantling lubricant and suitable for use within Food & Beverage, Packaging, Pharmaceutical and other cleanroom environments.

Premier HT Plus 10W-30 is a multifunctional transmission and hydraulic fluid for tractors and plant.

Morris K65 is an industrial, extreme temperature, medium consistency plain and rolling bearing grease for applications at operating temperatures up to 600°C.

Typical applications include: kiln car bearings, furnace doors, drying tunnel mechanisms and other applications where high temperatures are encountered.

Morris Airforce VPO HV is recommended for use in a wide range of positive displacement vacuum pumps, including rotary vane, lobe, screw and reciprocating designs.

Morris Golden Film 10W-40 is suitable for use in passenger cars and light commercial vehicles, that may have originally specified a 10W-40 or where engines have been rebuilt or restored.

A low oil content semi-synthetic cutting fluid, incorporating the latest in formaldehyde and boron-free technology.

Specially formulated ash-less compressor oil for the lubrication of both reciprocating and rotary air compressors.

Service life of up to 4000 hours in reciprocating compressors.

Versimax HD17 5W-30 is designed for use in diesel engines meeting Euro IV, V and VI emission requirements where an oil of this quality is specified.

Multivis ECO PV 0W-20 is a low viscosity passenger car engine oil that provides advanced fuel economy performance coupled with outstanding wear protection and cleanliness under a wide variety of driving conditions.

Crystal White Oils are highly refined medicinal grades, that are water white in colour, odourless and tasteless. These products are extremely stable and will not break down or form sludges. Category Code: H1, HX-1, 3H

Morris Heavy Liquid Paraffin is a highly refined medicinal white oil grade that is water white in colour, odourless and tasteless. This product is extremely stable and will not break down or form sludges.

K90 Calcium Sulphonate Complex Grease has been developed as a high performance grease for construction
plant such as bulldozers, scrapers, loading shovels and dump trucks where it will give outstanding performance.
It is also recommended for use in industrial equipment operating at high temperatures or exposed to salt water.

Multivis ADT RN 5W-30 has been specifically formulated to cope with the demands of Renault vehicles produced after 2018 and fitted with their latest gasoline and diesel engines. This product also covers the requirements of older units where RN0700 and RN7

Morris GEO LZ 40 is a premium high performance, low ash gas engine oil formulated to lubricate high-output, 4-cycle natural gas engines operating on special gases such as landfill and bio digestion.

Morris GEO Ultra Plus 40 is a premium high performance, low ash gas engine oil formulated
to lubricate high-output, 4-cycle natural gas engines operating on special gases such as
landfill and Bio digestion.

Morris GEO Plus MA 40 is a premium high performance, medium ash gas engine oil formulated to lubricate high-output, 4-cycle natural gas engines operating on special gases such as landfill and Bio digestion. The product has specially been developed for use in environments where the gas feed is at its harshest including high levels of H2S.

Developed to offer improved performance capable of meeting the demands of vane pumps used in biogas digestion plants. Formulated from high quality Group II base oils and a combination of ashless additives that provide excellent
oxidation stability, protection against rust & corrosion, low foaming and excellent demulsibility.

Water Glycol based hydraulic fluid, VG46

TYGRIS Stripeline Marking Paint Blue is a solvent based paint used for applying semi-permanent markings to most hard surfaces, inside or outside. Used inverted with a handheld or wheeled applicator, this paint is rapid drying and has good resistance to abrasion and chemicals. Available in 7 colours for safety and legal purposes.

TYGRIS Stripeline Marking Paint White is a solvent based paint used for applying semi-permanent markings to most hard surfaces, inside or outside. Used inverted with a handheld or wheeled applicator, this paint is rapid drying and has good resistance to abrasion and chemicals. Available in 7 colours for safety and legal purposes.

PROTEAN Instant Degreaser is an INS: A1 registered ready-to-use general cleaner suitable for use in around food processing area, though not intended for direct food contact. Both odourless and non-tainting, PROTEAN Instant Degreaser is tested to BS EN 1276 and kills bacteria fast and effectively.

TYGRIS Super Lube Extreme Pressure is a PTFE reinforced lubricant with excellent penetrating properties. De-waters, lubricates, releases and protects.

TYGRIS Leak Detector is an inoffensive, non-corrosive foam used in the inspection of pipework to prevent leaks passing unnoticed with potentially dangerous effects. It will detect any leaks instantly and is harmless to most materials as well as being safe to use with most gases.

TYGRIS Anti-Static Foaming Cleaner is designed for use around the workplace where the build up of dust is undesirable, its anti static properties dissipating static electrical charges effectively. For use on all water resistant, non porous surfaces, the foaming action aids in clinging to vertical surfaces.

PRECISION Solvent Tool & Electronics Cleaner is a non-chlorinated, medium to fast evaporating, light duty cleaner for use on metallic and plastic surfaces, removing general grime, and also greases and oils in heavier duty applications. Can be used on electrical equipment once the supply has been isolated.

Invert emulsion type fire resistant hydraulic fluid, VG46

Morris Golden Film classic 2-stoke is an ideal choice for 1950’s, 1960’s and 1970’s British, Japanese and European classic 2-Stroke motorcycle and scooter engines

Multitrans MTS 75W-90 gear oil is designed and recommended for use in non-syncronised manual gearboxes, differentials and final drives, where a SAE 75W-90, complying with one of the following performance levels, is specified. API GL-5, API MT-1, SAE J2360, Scania STO 1:0, MIL-PRF-2105E.

Liquimatic D46 is designed to provide outstanding hydraulic system efficiency, clean performance, excellent oxidation and thermal stability. The high level of anti-wear properties and excellent film strength result in a high degree of equipment protection that not only results in fewer breakdowns but helps improve production capacity.

NEVASTANE AW oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP.
Excellent anti-wear and corrosion protection.
Miscible with mineral fluids.

NEVASTANE AW oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP.
Excellent anti-wear and corrosion protection.
Miscible with mineral fluids.

NEVASTANE EP oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP.
Superior protection against high loads.
Adapted to a wide range of applications.

NEVASTANE EP oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP.
Superior protection against high loads.
Adapted to a wide range of applications.

NEVASTANE EP oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP.
Superior protection against high loads.
Adapted to a wide range of applications.

NEVASTANE EP oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP

FINAVESTAN white oils are obtained from petroleum through severe refining processes that guarantee an extremely high purity.

FINAVESTAN are transparent and colourless oils. They are also odourless and tasteless

FINAVESTAN white oils are NSF 3H and H1 registered

Multitrans SA 75W-140 is designed and recommended for use in heavy duty axle / differential applications including Scania units requiring a lubricants with a STO 2:0A qualification.

A fully synthetic (mineral oil free) metalforming fluid with very high lubricity. This makes it suitable for a wide range of applications and metals.

Morris Lubricants Race 4T 10W-30 is recommended for the majority of high performance four stroke motorcycles, where a product of this type and specification is demanded. Safe for use in wet clutch systems.

NEVASTANE XS 320 is an extreme pressure grease dedicated to the lubrication in food industry under very severe conditions: water, high load, high temperature, dust…

NEVASTANE XMF greases are recommended for the lubrification of food and beverage processing machinery operating under severe conditions such as loaded gears and bearings, seamers, filling machines, conveyors, mixers.

NEVASTANE XS 80 is an EP multi purpose grease, recommended for various applications in the food and food related industry operating under severe conditions (high load, high temperature, water, dust).

Petro-Canada Lubricants’ ENDURATEX™ EP Gear Oils are premium quality, extreme-pressure lubricants designed for use in enclosed industrial gear drives operating under normal, heavy or shock-loaded conditions.

SAMOA Pumpmaster 2 - 3:1 Ratio Air Operated Trolley Mounted Mobile Oil Dispenser for 205 Litre Drums

SAMOA Pumpmaster 2 - 3:1 Ratio Air Operated Metered Transfer Package for 205 Litre Drums

SAMOA Pumpmaster 2 - 3:1 Ratio Air Operated Transfer Package for IBC Mounting

Morris Lubricants Liquimatic XT284 is recommended for use in highly stressed plant and off-highway transmission systems incorporating wet brake technology

Polypropylene blue coloured lever action pump with EPDM seals - 2" BSP (M) thread. Suitable for AdBlue®/DEF.

Lodexol HPS 75W-90 gear oil is designed and recommended for use in manual gearboxes, semiautomatic gearboxes, transaxles, transfer boxes, differentials and final drives, where a SAE 75W-90 lubricant of this performance level is specified.

Morris Lubricants Versimax® HD16 5W-30 has been developed for use in diesel engines fitted with exhaust gas re-circulation (EGR), selective catalytic reduction (SCR – Adblue) NOx reduction systems, diesel oxidation catalysts (DOC) and diesel particulate filters (DPF).

Graphited lubricating oil for kiln for car bearings and other kiln components

A specially developed grease using a semi-synthetic blend of base oils manufactured with a bentone thickener containing a high level of graphite and synergistic EP-additives and antioxidants designed particularly for hydraulic hammer lubrication, pin and bush type of applications on large earth moving and general off-road heavy plant machinery.

Morris Lubricants Versimax HD18 5W-20 maximises fuel efficiency potential by producing a thin strong oil film whilst under load, which in turn reduces energy losses and CO2 output.

IS91 (Part of a 3 part non-destructive testing system). Part 1 is an effective slow-drying solvent cleaner

IS92 Dye Penetrant (Part 2 of a 3 part non-destructive testing system)

Tygris IS93 Crack Detector Developer No 3 (Part 3 of a 3 part non-destructive testing system)

TYGRIS Heavy Duty Adhesive is an easy to use adhesive for bonding most surfaces including textile, foam, rubber, plastic, foil, cardboard and paper. Good for fixing down carpets, underlay and floor tiles. In a non-chlorinated form for maximum safety.

R260 High strength contact adhesive in non-chlorinated form

Gravity feed kit for AdBlue®/DEF

Multivis ADT DV 5W-30 has been developed to help combat the issue of Low Speed Pre-ignition (LSPI) which can cause damage to certain petrol engine types.

Largo Mineral Oils are a versatile range of oils which can be used wherever a straight mineral oil has been specified. Particularly recommended for lightly loaded industrial equipment with circulating systems, oil baths, automatic lubricators, wick oilers, spray, splash and mist lubricators

FSW Grease is a high quality, all round performing, white food machinery grease.

Waste Oil Gravity Collection Unit with Pump Discharge

Mobile unit to dispense viscous lubricants.

Morris Lubricants Multivis ECO FE 0W-20 is a low viscosity, high performance engine oil that has been formulated primarily for use in Ford’s 1.5L EcoBlue turbodiesel units.

Multivis ECO FE 0W-20 is recommended for passenger car engines, including turbo-charged and

supercharged versions, requiring a low viscosity grade.

Specially formulated range of ashless compressor oils for the lubrication of both reciprocating and rotary air compressors.

The Alto range of machine oils contain anti-rust and antioxidant additives (R&O) that are blended into high quality mineral oils that possess good natural lubricating properties enhanced by modern refining techniques. They have good viscosity indices and separate from water cleanly and quickly.

Morris Race C40 is recommended for four stroke grass-track and classic machines where castor-based products are preferred. This grades may also be suitable for premix use in two stroke applications with both petrol and methanol fuels.

For speedway use, where the virtues of castor oil has been recognised for many years, Race C50 protects and lubricates engines primarily designed to run on these traditional oils. 

Morris Race C30 is an engine oil manufactured from high quality first pressing castor oil. Synthetic base fluids are incorporated to achieve SAE 30 classification.

Morris Cora B is suited to general machining operations on ferrous metals up to medium tensile steels and non-ferrous metals. The additive system ensures improved surface finish and tool life whilst remaining non-staining to copper and its alloys.

Morris Multivis ADT C3 5W-40 is a mid-SAPS synthetic technology engine oil formulated to meet the

demands and fuel efficiency expectations of the latest petrol and diesel engines, where a low
viscosity oil is required.  

Lodexol SS 80W-140 has extremely good cold start fluidity, ensuring fast circulation around gear systems even when the oil is cold. Additionally, Lodexol SS 80W-140 has exceptional high temperature stability, ensuring maximum gear set protection even under the most arduous operating conditions