Brand Selector

This oil has been manufactured for the special requirements of these engines using today’s technology and materials. The traditional technology used in this oil provides outstanding, resistance to rust, corrosion, wear and oxidation, even in the presence of water. This oil also has a high viscosity index, giving good flow rates to bearings and all moving parts at low start up temperatures, coupled

This is a low viscosity water white mineral oil specially prepared as a reference fluid for diesel injection testing equipment. A fluid such as Seria Fuel Pump Test Oil is produced to very close specification limits, which are essential for accurate and consistent results in test equipment. It is not possible to perform these testing procedures with diesel fuels that can vary considerably in viscosity

Morris Servol 10W/40 is suitable for use in passenger cars, light commercial vehicles, horticultural equipment, etc., where a grade of this type and performance level is required.

Superclean Morendo DD is a multifunctional diesel fuel additive that will improve ignition quality, combustion and storage of distillate fuels.

Superclean Motortune is an advanced fuel additive designed to clean and maintain petrol engine fuel systems. Superclean Motortune can improve the overall running of old and new engines by reducing deposit build-up within carburettors and injectors. This product will combat corrosion in petrol tanks and fuel systems, de-coke combustion chambers, free sticking valves and clean manifolds and ports. Improved

When mixed with water Supercut 1000 forms a stable milky emulsion which can be used in most conventional machining operations. Unison Edgeplus is a cost effective product that exhibits excellent corrosion protection and exceptional service life for a conventional fluid of this type.

SUPERCUT 3000 is a micro-emulsion metalworking fluid that is readily miscible with most mains water producing a transparent blue emulsion that is suited to a wide variety of applications.

Supercut 4000 is a micro-emulsion metalworking fluid is readily miscible with most mains water to produce a translucent green emulsion that is suited to a wide variety of applications. Supercut 4000 has excellent lubricity, is low foaming, offers excellent workpiece visibility, excellent resistance to bacterial degradation and  extended sump life.  

Supercut 8000 yields multi-metal compatibility, high tolerance to tramp oil and excellent surface finishes on many different alloys. The product has been specifically developed for use witnthe more difficult to machine alloys, whilst carefully selected corrosion inhibitor systems ensure stain free performance3 on steels, brasses and aerospace aluminium alloys.

SUPERCUT G has multi-metal compatibility, tolerance to tramp oil and bacterial degradation , helps reduce tool wear and gives excellent surface finishes on many different alloys.  Supercut G has been developed specifically for use with the more difficult to machine alloys and aluminium.  Carefully selected corrosion inhibitor systems ensure stain free performance on most metals including steels

Hard metals such as tungsten carbide contain significant amounts of Cobalt in their make-up. It has been shown* that if released into the work place, Cobalt poses a health hazard to machine operators. If conventional synthetic grinding fluids are used to grind carbides, Cobalt is automatically released into the fluid and builds up to harmful levels. A specialist product is therefore required to prevent

Formulated for applications involving high removal rates of ferrous and non-ferrous materials. Due to the unique formulation, this product combines properties which ensure extremely good flushing performance coupled with low foaming characteristics that allow the fluid to stay clear and clean.Supergrind MP is part of the new generation of grinding fluids which are nitrite, mineral oil, sulphur, chlorine

Supergrind Plus is a fully synthetic grinding fluid offering exceptional performance and extended sump life in most grinding operations. It is formulated using the latest technology and offers excellent corrosion protection, stable solutions, low foaming tendency, excellent fines separation and resistance to degradation by bacteria or fungi. The synthetic formulation also alleviates &ldquowheel glazing

Supergrind SW is a fully synthetic water-mix grinding fluid that forms a true solution when diluted with water. Supergrind SW is formulated to have a very low foaming tendency, even when used with soft water. 

Through its exceptional balance of cooling and lubricating properties, it has the outstanding ability to produce ultra-fine surface finishes. The product may be used on all metal types with the exception of hard metal carbides, and is especially recommended for non-metals, composites and glasses.Supergrind Ultra is ideal for surface grinding and roll grinding and may be used for ultra high speed machining

Tabor 95 is a high quality concrete mould oil specially designed for production of slabs, posts and pavings where precision steel moulds are used. The formulation of light mineral oil, reactive fats and lubricity agents, is free of both solvents and wool fats and therefore the finished product has a low odour and a light colour. This product has better operator acceptability than traditional mould

Tabor OK finds use in a variety of applications e.g. as a process oil, degreasing medium and as a dielectric fluid for spark erosion.  It is also suitable as a replacement for chlorinated solvents in certain applications and may be used as a lower odour, high flash point alternative to white spirit  where the evaporation rate is not critical.

The Terrain CT range is formulated with high quality mineral oils and additives designed to provide the correct frictional characteristics required by Caterpillar in transmission and hydraulic systems. The additive system also gives this oil improved temperature performance, superior resistance to oxidation, rust, corrosion and improved anti-foam properties. In addition these grades have excellent

The Terrain CT range is formulated with high quality mineral oils and additives designed to provide the correct frictional characteristics required by Caterpillar in transmission and hydraulic systems. The additive system also gives this oil improved temperature performance, superior resistance to oxidation, rust, corrosion and improved anti-foam properties. In addition these grades have excellent

The Terrain CT range is formulated with high quality mineral oils and additives designed to provide the correct frictional characteristics required by Caterpillar in transmission and hydraulic systems. The additive system also gives this oil improved temperature performance, superior resistance to oxidation, rust, corrosion and improved anti-foam properties. In addition these grades have excellent

Terrain LS 80W-90 has been specifically designed for use in limited slip differentials and wet brake systems fitted to off-highway and agricultural equipment. where differential loadings are high and where a variety of operating conditions may be encountered.

Terrain XL 10W-30 high performance heavy duty multigrade engine oil recommended for diesel units fitted to off-highway equipment operating under varying work loads. Terrain XL 10W-30 provides high levels of cleanliness, wear, rust and oxidation protection, together with outstanding soot handling and sludge dispersancy.

Terralus AIR-O-LUBE is a pale amber liquid derived from natural vegetable oils blended with performance enhancing additives. It has low toxicity and is readily biodegradable. Terralus AIR-O-LUBE is a specially balanced formulation for use through metered mist air equipment to ensure economical lubricant utilisation and eliminates fluid loss associated with flood coolants. It has a high affinity to metal surfaces giving superior adhesion and on contact, the airborne droplets cling to minimise back scatter.

This range is mineral oil free and has been specially developed to meet concern over the inevitable spills, leakages and total system losses that frequently occur from burst hoses on hard worked hydraulic equipment. This is particularly important if hydraulic equipment is working where soil or water contamination is a possibility. In addition to the problem of mineral oil pollution, there is now evidence

This range is mineral oil free and has been specially developed to meet concern over the inevitable spills, leakages and total system losses that frequently occur from burst hoses on hard worked hydraulic equipment. This is particularly important if hydraulic equipment is working where soil or water contamination is a possibility. In addition to the problem of mineral oil pollution, there is now evidence

Terralus BVG Hydraulic Oils are a range of readily biodegradable hydraulic oils manufactured to meet the requirements of hydraulic systems in industrial, horticultural and earth moving equipment. This range is mineral oil free and has been specially developed to meet concern over the inevitable spills, leakages and total system losses that frequently occur from burst hoses on hard worked hydraulic

Terralus CBO oil is specially formulated to overcome the environmental concern, of long term potentially harmful ecological effects of mineral based oils in total loss systems, particularly in the agricultural, forestry, horticultural and water industries. The biodegradable products used in the formulation: -&bull Reduce wear on cutter bar chain and sprockets&bull Reduce build up of foam&bull Provide

Terralus SB46 is a fully synthetic biodegradable hydraulic oil that may be used in environmentally sensitive locations such as agricultural land, forest floor, ground near water courses and reservoirs and construction sites. Terralus SB46 is based on synthetic esters to reduce gumming and high temperature oxidation, while improving low temperature fluidity. The formulation also contains approved performance additives, to reduce corrosion, wear and extend equipment life.

Terralus UTTO is a biodegradable multi-functional tractor transmission fluid that can be used in transmissions, hydraulics, oil immersed (wet brakes), PTOs and final drive systems. The product has been carefully formulated from raw materials that have demonstrated a level of biodegradability that makes it an ideal candidate for use where environmental impact must be reduced to a minimum.

Terralus Viroclean is a non-toxic, water-based, biodegradable cleaner. The concentrate is mildly alkaline to aid dirt removal but contains no petroleum or chlorinated solvents.

Terza 7060 is a high quality low viscosity mould release oil containing solvent refined mineral oil, hydrocarbon solvent and lubricity additives.  It has been specially produced for use in high rate production of fired clay and concrete building products.  This is a low viscosity fluid, which after the evaporation of the solvent, dries to a tenacious oily film on the mould surface.  The

Terza M-107 has been specially produced for use in high rate production of concrete roof tiles, on the type of machines where the moulds are continuously chain driven past the pouring hopper.  This is a low viscosity fluid, which after the evaporation of the solvent, dries to a tenacious oily film on the mould surface.  The low viscosity helps the film to flow and cover the mould surfaces, and spread

Morris Lubricants Transformer Oil is a highly refined naphthenic product for use solely in oil filled transformers and other electrical equipment.  The base stock and refining process has been specifically chosen to produce a long life product free of oxidation and sludging tendencies.

Premium hydraulic oil - ISO VG 32 with excellent anti-wear properties and corrosion inhibition. Good anti-foam plus rapid air release prevents sponginess, ensuring a positive hydraulic response. Ideal for use in mobile plant.

Premium hydraulic oils - ISO VG 46, with excellent anti-wear properties and corrosion inhibition. Good anti-foam plus rapid air release prevents sponginess, ensuring a positive hydraulic response. Ideal for use in mobile plant.

Premium hydraulic oils - ISO VG 68, excellent anti-wear properties and corrosion inhibition. Good anti-foam plus rapid air release prevents sponginess, ensuring a positive hydraulic response. Ideal for use in mobile plant.

Morris Lubricants Ultralife 1 is suitable for the cooling systems of modern engines in passenger car, trucks, agricultural and contractors plant, where an OAT antifreeze is demanded by the following OEMs:

Morris Lubricants Ultralife 2 may be used with confidence in engines manufactured from cast iron, aluminium or combinations of the two metals, and in cooling systems made of aluminium or copper alloys. It is particularly recommended for use in Asian OEM’s, in line with their basic chemistry
requirements.

Morris Lubricants Ultralife 3 can be used in internal combustion engines (ICEs), hybrids and the indirect cooling systems of battery electric vehicles (BEVs) where any of the specifications listed are demanded by the equipment manufacturer.

Morris Ultralife 4 provides long-life protection against all forms of corrosion by the use of optimised and patented organic corrosion inhibitors. This product does not contain nitrates, nitrites, amines,

borates or silicates. Excellent and lasting high temperature corrosion protection is provided for
the aluminium heat transfer surfaces contained in modern engines. Furthermore, Ultralife 4 offers
excellent cavitation protection.

Ultralife Red will protect all engines from frost damage right down to &ndash40oC (at 50% of total coolant volume). It also provides outstanding protection against rust and corrosion for all parts of the cooling system and is therefore recommended for all year round use. This Ethylene Glycol based antifreeze, which uses Organic Acid technology, is free from nitrites, amines, phosphates, borates and

Versimax HD11 5W-30 is a top tier heavy duty diesel specific engine oil that has been designed to meet the necessary chemical limits required to maintain the efficiency of exhaust aftertreatment devices

Versimax HD12 15W-40 is designed for use in Euro 5 / Euro 6, Interim Tier 4 / Stage 3B / Tier 4 and Stage 4 diesel engines

Morris Versimax HD14 10W-30 is designed for use in Euro 5 / Euro 6, Interim Tier 4 / Stage 3B / Tier 4 and Stage 4 diesel engines

Morris Lubricants Versimax® HD16 5W-30 has been developed for use in diesel engines fitted with exhaust gas re-circulation (EGR), selective catalytic reduction (SCR – Adblue) NOx reduction systems, diesel oxidation catalysts (DOC) and diesel particulate filters (DPF).

Versimax HD17 5W-30 is designed for use in diesel engines meeting Euro IV, V and VI emission requirements where an oil of this quality is specified.

Morris Lubricants Versimax HD18 5W-20 maximises fuel efficiency potential by producing a thin strong oil film whilst under load, which in turn reduces energy losses and CO2 output.

Versimax HD3 20W-50 has high levels of detergency /dispersancy to reduce combustion chamber deposits and ring sticking, as well as preventing excessive soot thickening. This grade will protect from wear, rust and corrosion.

Versimax HD4 15W-40 is a highly versatile heavy duty engine oil that can be used to rationalise inventories, due to its extensive performance profile.

Versimax HD5 10W-40 is formulated in semi synthetic base fluids, to improve cold start fluidity and circulation, while also protecting components under severe load, when running at high temperatures.

Versimax HD8 10W/40 is a low SAPS (Sulphated Ash, Phosphorus and Sulphur) synthetic heavy duty diesel specific engine oil. Manufactured from synthetic base fluids this product contains an advanced additive package formulated to provide protection when operating in very severe conditions with extended drain intervals. Versimax HD8 10W/40 meets the heavy duty truck requirements for Low Emission

Workshop PRO All Seasons Screen Wash is a specially formulated screen wash concentrate that is made for adding to water in vehicle washer bottles. It cuts through dirt and grime from roads and traffic leaving a clean and sparkling smear free windscreen. The special formulation helps wiper blades glide smoothly over the screen and eliminates annoying judder. Suitable for all year round use.

Workshop PRO Anti-Seize is a lead and CFC free compound, made from solvent refined oil, Bentonite thickener and fine copper powder. The product is highly recommended as a thread lubricant on the external parts of all racing motorcycles, where rapid and trouble free disassembly by pit crews is a competitive essential.

Morris Workshop Pro Citrus Hand Gel is a powerful heavy-duty hand cleanser containing non environment polluting micro-particles for the effective removal of ingrained dirt, grease and grime. Free from petroleum derived solvents but designed to outperform traditional solvent based hand cleansers.

Fully Synthetic Chain Lube - protects chains from wear and corrosion. Initialy a thin free-flowing lubricant when sprayed it penetrates into vital inner pins and bushes of the chain links where it cushions against shock loading.

When applied to wet parts the chemistry of MD-4 has a powerful attraction to the underlying surfaces and this completely displaces traces of water. Therefore this product is particularly useful as an engine damp start. If the aerosol pack is used, a short spray on to the affected parts will displace any wetness and prevent voltage breakdown, allowing the engine to be started again normally. MD-4 is

Workshop Pro Semi-synthetic Chain Lubricant is a specially formulated aerosol designed for the protection of chains used in a variety of applications.

A complex mixture of hydrocarbon and oxygenated solvents designed to clean and degrease all flat and irregular surfaces.

Workshop Pro Solvent Degreaser is a ready for use, pink coloured emulsifiable fluid, manufactured from a highly refined hydrocarbon solvent and a non-ionic surfactant. It was originally developed for rapid de-waxing of car bodies. 

Workshop Pro Surface Conditioner is a special blend of silicone, solvents and cleaners. It has been designed as a multipurpose product that cleans, restores and protects surfaces at the same time.

Workshop Pro White Spray Grease is a combination of a Calcium and Zinc based grease in an aerosol form offering good resistance to water and heat. The product also offers long lasting protection against corrosion.

Workshop ProTraffic Film Remover is a unique combination of surface active agents, sequestrants and alkaline builders with the following features. Effective at higher dilutions. Easily and gently removes road dirt and grime. Ideal for hot or cold pressure wash machines. Effective in hard and soft waters. Contains rinse off additive. Biodegradable. Dyed blue for product identification. Safe on paint work, metal surfaces, glass and rubber. Does not contain ingredients which accelerate metal corrosion.

Morris XEP 80W-90 has been specifically designed for use in limited slip differentials requiring the following viscosity grades 80W-90, 85W-90 or 90 grade lubricants.

Petro-Canada’s HYDREX XV All Season hydraulic fluid is recommended for year-round use in piston, gear and vane hydraulic pumps found on industrial machinery and mobile equipment.

Petro-Canada Peerless LLG grease is premium multi-application calcium sulphonate complex grease, Peerless LLG provides outstanding oxidation stability, excellent water resistance, outstanding rust protection and excellent load carrying ability under high operating temperatures.

Petro-Canada PEERLESS™ greases are premium performance, multi-application greases formulated to reduce operating costs and provide extended protection in high temperature or wet operating conditions.

PURITY FG WO oils may be safely used where an approved food grade or inert white mineral oil is required. General applications include incidental food contact in producing, manufacturing, processing, treating or packaging food.
Specific applications include:
• Rust and corrosion prevention for knives and cutting tables used in food preparation
• Release agents for molds and bakery pans
• Plasticizers
• Moisture resistant coatings on food packaging
• Dust suppressants
• Cleaning agent for stainless steel
• Shell egg protecting oil to retain freshness (15 grade only)
Prior to application (spraying) of the products in food handling areas, all food products should either be removed from the vicinity or otherwise protected from the spray.

Petro-Canada’s PURITY™ FG AW Hydraulic Fluids are advanced food grade lubricants formulated to deliver long lasting protection.
PURITY FG’s performance results from more than 30 years formulating experience. Using the HT purity process, Petro-Canada produces a 99.9%, crystal clear base oil – among the purest in the world. Virtually free of impurities that can hinder performance and fortified with specially selected performance additives, PURITY FG AW Hydraulic Fluids have excellent resistance to oxidative breakdown. Tough enough to handle wet food processing environments with acidic contaminants and wide temperature swings, PURITY FG AW Hydraulic Fluids can help extend equipment life and reduce operational downtime.

Petro-Canada’s PURITY™ FG AW Hydraulic Fluids are advanced food grade lubricants formulated to deliver long lasting protection.
PURITY FG’s performance results from more than 30 years formulating experience. Using the HT purity process, Petro-Canada produces a 99.9%, crystal clear base oil – among the purest in the world. Virtually free of impurities that can hinder performance and fortified with specially selected performance additives, PURITY FG AW Hydraulic Fluids have excellent resistance to oxidative breakdown. Tough enough to handle wet food processing environments with acidic contaminants and wide temperature swings, PURITY FG AW Hydraulic Fluids can help extend equipment life and reduce operational downtime.

Advanced food grade lubricants formulated to deliver superior performance and longer service life

Advanced food grade lubricants formulated to deliver superior performance and longer service life

Petro-Canada’s PURITY™ FG EP Gear Fluids are advanced food grade lubricants formulated to deliver long lasting protection.
PURITY™ FG’s outstanding performance results from more than 30 years formulating experience. Using the HT Purity Process, Petro- Canada produces a 99.9% pure, crystal clear base oil – among the purest in the world.

Petro-Canada’s PURITY™ FG EP Gear Fluids are advanced food grade lubricants formulated to deliver long lasting protection.
PURITY™ FG’s outstanding performance results from more than 30 years formulating experience. Using the HT Purity Process, Petro- Canada produces a 99.9% pure, crystal clear base oil – among the purest in the world.
Virtually free of impurities that can hinder performance and fortified with specially selected performance additives, PURITY™ FG EP Gear Fluids provide outstanding resistance to oxidation, and protection from wear and shock loading.

Petro-Canada’s PURITY™ FG EP Gear Fluids are advanced food grade lubricants formulated to deliver long lasting protection.
PURITY™ FG’s outstanding performance results from more than 30 years formulating experience. Using the HT Purity Process, Petro- Canada produces a 99.9% pure, crystal clear base oil – among the purest in the world.
Virtually free of impurities that can hinder performance and fortified with specially selected performance additives, PURITY™ FG EP Gear Fluids provide outstanding resistance to oxidation, and protection from wear and shock loading.

PURITY FG Chain Fluids are recommended for lubricating all types of drive and conveyor chains as well as bearings found on food processing machinery.
They may be applied by brush or drip feed as well as by centralized lubrication systems.

PURITY FG Chain Fluids may be applied at temperatures up to 200°C / 392°F.  However, at temperatures above 150°C / 302°F, equipment should be re-oiled more frequently.

PURITY FG Chain Fluids are recommended for lubricating all types of drive and conveyor chains as well as bearings found on food processing machinery.
They may be applied by brush or drip feed as well as by centralized lubrication systems.

PURITY FG Chain Fluids may be applied at temperatures up to 200°C / 392°F.  However, at temperatures above 150°C / 302°F, equipment should be re-oiled more frequently.

Petro-Canada’s PURITY™ FG2 SYNTHETIC Grease is an advanced food grade grease specially formulated for the toughest food processing applications. Its advanced chemistry provides outstanding protection against wear and water washout, over a wide range of operating temperatures.
PURITY FG2 SYNTHETIC Grease also meets the highest food industry safety standards and fits perfectly in HACCP (Hazard Analysis and Critical Control Point) and GMP (Good Manufacturing Practice) plans.

Petro-Canada Lubricants’ ENDURATEX™ EP Gear Oils are premium quality, extreme-pressure lubricants designed for use in enclosed industrial gear drives operating under normal, heavy or shock-loaded conditions.

Polypropylene blue coloured lever action pump with EPDM seals - 2" BSP (M) thread. Suitable for AdBlue®/DEF.

A fully biodegradeable product developed specifically for metal cutting applications where the lubricant is applied by air-misting.

A highly effective flushing additive, designed to be added to old cutting fluid emulsions to assist cleaning of system prior to changing.    

Hard smooth non-porous grease with good resistance to oxidation. Formulated from a soap thickened mineral oil Premier Block Grease exhibits only slight changes in consistency at elevated temperatures.           

Premier Ease Release Oil is specially blended, highly versatile, quality neat oil with surfactant which is ideal for use on metal, timber, other formwork materials and coatings

Premier EXTRA-X 15W-40 Engine oil.

This is an extremely high performance long life diesel engine oil. The API ACEA classification allows 100,000 kms between oil changes.

Graphited lubricating oil for kiln for car bearings and other kiln components

Premier Lubricants Grindsol 495 Plus is a completely Amine free grinding fluid that forms a clear fluorescent solution.

A nitrite-free, mineral oil free grinding fluid incorporating the latest biostable technology.

Invert emulsion type fire resistant hydraulic fluid, VG46

Water Glycol based hydraulic fluid, VG46

Premier HT Plus 10W-30 is a multifunctional transmission and hydraulic fluid for tractors and plant.

A premium quality Hydraulic oil formulated from solvent refined mineral base oils with additives to provide excellent protection against oxidation, corrosion, wear and foaming. This hydraulic oil is blended to ISO 32 viscosity grade requirements and is suitable for use in a wide range of mobile and static hydraulic equipment...

A premium quality Hydraulic oil formulated from solvent refined mineral base oils with additives to provide excellent protection against oxidation, corrosion, wear and foaming. This hydraulic oil is blended to ISO 46 viscosity grade requirements and is suitable for use in a wide range of mobile and static hydraulic equipment including forklifts, excavators, lifts, presses

A high performance neat cutting oil specifically developed for use on severe applications.

Specially formulated ash-less compressor oil for the lubrication of both reciprocating and rotary air compressors.

Service life of up to 4000 hours in reciprocating compressors.

Premier Marine Engine Oil is specifically formulated for use in boats requiring an API CC performance.

Premier slideway 68 is a premium quality machine tool slideway oil formulated to meet the requirements of the latest machine tool slideways, tables, carriages, guides and general machine operations including hydraulics and gear boxes. Slideway oils are formulated from high viscosity index solvent refined mineral base oils fortified with additives to prevent oxidation, corrosion and wear, and deliver excellent lubrication

Forms a good stable milky emulsion, even in hard waters up to 400 ppm Ca CO3 hardness. Good inhibition against corrosion of a wide range of ferrous metals, giving protection to workpiece and machine parts. Also good resistance to contact corrosion, so workpieces may be stacked without staining taking place. Low staining potential on many non-ferrous metals including copper and its alloys

A fully synthetic (mineral oil free) metalforming fluid with very high lubricity. This makes it suitable for a wide range of applications and metals.

TDR Paste: A waxy paste usually applied by dipping the tool into the product.  

A viscous liquid usually applied by the use of squeeze or dripping bottle.

TFR is a heavy-duty vehicle cleaning liquid for cleaning bodies, alloy wheels, chassis, tilts and taut liners on commercial vehicles, cars, vans & bikes.

A low oil content semi-synthetic cutting fluid, incorporating the latest in formaldehyde and boron-free technology.

A translucent green, biostable, micro-emulsion metalworking fluid that offers excellent workpiece visibility and extended sump life. It is non-staining to ferrous and non-ferrous materials which enables it to be used on a wide variety of metals from medium tensile and high carbon steels to cuprous alloys and cast iron. It is particularly suited to modern CNC machning centres. Premiercut GP is ideal

A biostable, semi-synthetic cutting fluid designed for use in applications where extra lubricity and extreme pressure properties are required, such as: Sawing of aluminium and aerospace alloys. Broaching. Screw cutting of alloy steels. Deep hole boring. Spray applied gun drilling Forming.

F402 is a NSF: H1 registered, spray-formulated, water resistant lubricant for use on roller and needle bearings and chains. Suitable for Food & Beverage, Packaging, Pharmaceutical and other cleanroom environments.