Order Hotline: 01782 410381
Petro-Canada’s PURITY™ FG EP Gear Fluids are advanced food grade lubricants formulated to deliver long lasting protection. PURITY™ FG’s outstanding performance results from more than 30 years formulating experience. Using the HT Purity Process, Petro- Canada produces a 99.9% pure, crystal clear base oil – among the purest in the world. Virtually free of impurities that can hinder performance and fortified with specially selected performance additives, PURITY™ FG EP Gear Fluids provide outstanding resistance to oxidation, and protection from wear and shock loading.
PURITY FG Chain Fluids are recommended for lubricating all types of drive and conveyor chains as well as bearings found on food processing machinery. They may be applied by brush or drip feed as well as by centralized lubrication systems.
PURITY FG Chain Fluids may be applied at temperatures up to 200°C / 392°F. However, at temperatures above 150°C / 302°F, equipment should be re-oiled more frequently.
SAMOA Pumpmaster 2 - 3:1 Ratio Air Operated Trolley Mounted Mobile Oil Dispenser for 205 Litre Drums
SAMOA Pumpmaster 2 - 3:1 Ratio Air Operated Transfer Package for IBC Mounting
Waste Oil Gravity Collection Unit with Pump Discharge
Morris GEO Plus MA 40 is a premium high performance, medium ash gas engine oil formulated to lubricate high-output, 4-cycle natural gas engines operating on special gases such as landfill and Bio digestion. The product has specially been developed for use in environments where the gas feed is at its harshest including high levels of H2S.
Morris GEO Ultra Plus 40 is a premium high performance, low ash gas engine oil formulatedto lubricate high-output, 4-cycle natural gas engines operating on special gases such aslandfill and Bio digestion.
Morris GEO LZ 40 is a premium high performance, low ash gas engine oil formulated to lubricate high-output, 4-cycle natural gas engines operating on special gases such as landfill and bio digestion.
Morris Locomax ZF 20W-40 ZF is blended to comply with the performance levels specified by the
Locomotive Maintenance Officers Association (LMOA) for Generations 4, 5 and 6. It also fulfilsthe requirements of API CF.
Developed to offer improved performance capable of meeting the demands of vane pumps used in biogas digestion plants. Formulated from high quality Group II base oils and a combination of ashless additives that provide excellentoxidation stability, protection against rust & corrosion, low foaming and excellent demulsibility.
SAMOA Pumpmaster 2 - 3:1 Ratio Air Operated Metered Transfer Package for 205 Litre Drums
Specifically designed for the lubrication of Traction Motor gears commonly found on Diesel-Electriclocomotives operating on the rail networks and heritage lines.
A range of fully synthetic gear oils, manufactured from polyalkylene glycol (PAG) fluids and specialised extreme pressure (EP) additives, to provide outstanding protection at all temperatures to industrial gear systems. Unlike conventional gear oils PAG fluids maintain an effective lubricating film over a wide operating temperature range, from artic conditions to high thermal loadings.
A range of fully synthetic gear oils, manufactured from polyalkylene glycol (PAG) fluids and specialised extreme pressure (EP) additives, to provide outstanding protection at all temperatures to industrial gear systems. Unlike conventional gear oils PAG fluids maintain an effective lubricating film over a wide operating temperature range, from artic conditions to high thermal loadings. PAG Fluids
Mobile unit to dispense viscous lubricants.
Terralus AIR-O-LUBE is a pale amber liquid derived from natural vegetable oils blended with performance enhancing additives. It has low toxicity and is readily biodegradable. Terralus AIR-O-LUBE is a specially balanced formulation for use through metered mist air equipment to ensure economical lubricant utilisation and eliminates fluid loss associated with flood coolants. It has a high affinity to metal surfaces giving superior adhesion and on contact, the airborne droplets cling to minimise back scatter.
Multitrans MTS 75W-90 gear oil is designed and recommended for use in non-syncronised manual gearboxes, differentials and final drives, where a SAE 75W-90, complying with one of the following performance levels, is specified. API GL-5, API MT-1, SAE J2360, Scania STO 1:0, MIL-PRF-2105E.
Petro-Canada’s PURITY™ FG EP Gear Fluids are advanced food grade lubricants formulated to deliver long lasting protection. PURITY™ FG’s outstanding performance results from more than 30 years formulating experience. Using the HT Purity Process, Petro- Canada produces a 99.9% pure, crystal clear base oil – among the purest in the world.
NEVASTANE EP oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP. Superior protection against high loads.Adapted to a wide range of applications.
NEVASTANE EP oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP.Superior protection against high loads.Adapted to a wide range of applications.
NEVASTANE EP oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP
Lodexol HPS 75W-90 gear oil is designed and recommended for use in manual gearboxes, semiautomatic gearboxes, transaxles, transfer boxes, differentials and final drives, where a SAE 75W-90 lubricant of this performance level is specified.
Multitrans SA 75W-140 is designed and recommended for use in heavy duty axle / differential applications including Scania units requiring a lubricants with a STO 2:0A qualification.
AIR FORCE 8000 FS is a range of ester based, fully synthetic, compressor lubricants designed specifically to meet the requirements of rotary screw compressors including modern, variable speed types. They incorporate the latest additive technology and have proved to be far superior in performance to conventional oils under all conditions.
Hard metals such as tungsten carbide contain significant amounts of Cobalt in their make-up. It has been shown* that if released into the work place, Cobalt poses a health hazard to machine operators. If conventional synthetic grinding fluids are used to grind carbides, Cobalt is automatically released into the fluid and builds up to harmful levels. A specialist product is therefore required to prevent
Graphited lubricating oil for kiln for car bearings and other kiln components
Terralus UTTO is a biodegradable multi-functional tractor transmission fluid that can be used in transmissions, hydraulics, oil immersed (wet brakes), PTOs and final drive systems. The product has been carefully formulated from raw materials that have demonstrated a level of biodegradability that makes it an ideal candidate for use where environmental impact must be reduced to a minimum.
Morris K65 is an industrial, extreme temperature, medium consistency plain and rolling bearing grease for applications at operating temperatures up to 600°C.
Typical applications include: kiln car bearings, furnace doors, drying tunnel mechanisms and other applications where high temperatures are encountered.
Hard smooth non-porous grease with good resistance to oxidation. Formulated from a soap thickened mineral oil Premier Block Grease exhibits only slight changes in consistency at elevated temperatures.
Advanced food grade lubricants formulated to deliver superior performance and longer service life
A range of gear oils, combining synthetic base fluids and powerful extreme pressure (EP) additives, for use in industrial gear systems. Lodexol FS Industrial Gear Oils are formulated to protect against wear, oxidation, foam, rust and corrosion.The synthetic base fluids used in this range have outstanding thermal stability ensuring that gear systems running at elevated temperatures have the
A range of gear oils, combining synthetic base fluids and powerful extreme pressure (EP) additives, for use in industrial gear systems. Lodexol FS Industrial Gear Oils are formulated to protect against wear, oxidation, foam, rust and corrosion.The synthetic base fluids used in this range have outstanding thermal stability ensuring that gear systems running at elevated temperatures have the correct
Terralus SB46 is a fully synthetic biodegradable hydraulic oil that may be used in environmentally sensitive locations such as agricultural land, forest floor, ground near water courses and reservoirs and construction sites. Terralus SB46 is based on synthetic esters to reduce gumming and high temperature oxidation, while improving low temperature fluidity. The formulation also contains approved performance additives, to reduce corrosion, wear and extend equipment life.
Liquisafe 46 is a high quality fire resistant hydraulic fluid blended with high and low molecular weight polyalkylene glycols in a stable water solution. The formulation includes special chemical additives that inhibit the formation of rust in the system, and provide anti-wear properties equal to that of mineral hydraulic oils. This product is compatible with all seals normally found in systems
A range of gear oils, combining synthetic base fluids and powerful extreme pressure (EP) additives, for use in industrial gear systems. Lodexol FS Industrial Gear Oils are formulated to protect against wear, oxidation, foam, rust and corrosion.
Petro-Canada’s PURITY™ FG AW Hydraulic Fluids are advanced food grade lubricants formulated to deliver long lasting protection. PURITY FG’s performance results from more than 30 years formulating experience. Using the HT purity process, Petro-Canada produces a 99.9%, crystal clear base oil – among the purest in the world. Virtually free of impurities that can hinder performance and fortified with specially selected performance additives, PURITY FG AW Hydraulic Fluids have excellent resistance to oxidative breakdown. Tough enough to handle wet food processing environments with acidic contaminants and wide temperature swings, PURITY FG AW Hydraulic Fluids can help extend equipment life and reduce operational downtime.
Magnaplex K982 an aluminium complex grease specifically formulated for use on open gears. This product has high load carrying and adhesive characteristics, which not only allow it to be used on gears with circumferential speeds in excess of 20m/sec., but also where exceptionally high loads and slow sliding speeds are encountered. It is free of bitumen, solvents and other components, which are hazardous
Supercut 8000 yields multi-metal compatibility, high tolerance to tramp oil and excellent surface finishes on many different alloys. The product has been specifically developed for use witnthe more difficult to machine alloys, whilst carefully selected corrosion inhibitor systems ensure stain free performance3 on steels, brasses and aerospace aluminium alloys.
SUPERCUT G has multi-metal compatibility, tolerance to tramp oil and bacterial degradation , helps reduce tool wear and gives excellent surface finishes on many different alloys. Supercut G has been developed specifically for use with the more difficult to machine alloys and aluminium. Carefully selected corrosion inhibitor systems ensure stain free performance on most metals including steels
Morris Lubricants Versimax® HD16 5W-30 has been developed for use in diesel engines fitted with exhaust gas re-circulation (EGR), selective catalytic reduction (SCR – Adblue) NOx reduction systems, diesel oxidation catalysts (DOC) and diesel particulate filters (DPF).
Lodexol SS 80W-140 has extremely good cold start fluidity, ensuring fast circulation around gear systems even when the oil is cold. Additionally, Lodexol SS 80W-140 has exceptional high temperature stability, ensuring maximum gear set protection even under the most arduous operating conditions
Supergrind SW is a fully synthetic water-mix grinding fluid that forms a true solution when diluted with water. Supergrind SW is formulated to have a very low foaming tendency, even when used with soft water.
Water Glycol based hydraulic fluid, VG46
Versimax HD11 5W-30 is a top tier heavy duty diesel specific engine oil that has been designed to meet the necessary chemical limits required to maintain the efficiency of exhaust aftertreatment devices
Supergrind Plus is a fully synthetic grinding fluid offering exceptional performance and extended sump life in most grinding operations. It is formulated using the latest technology and offers excellent corrosion protection, stable solutions, low foaming tendency, excellent fines separation and resistance to degradation by bacteria or fungi. The synthetic formulation also alleviates &ldquowheel glazing
Morris Lubricants Versimax HD18 5W-20 maximises fuel efficiency potential by producing a thin strong oil film whilst under load, which in turn reduces energy losses and CO2 output.
Developed specifically for steam engines operating on the national rail network where true superheat conditions are experienced on long hauls
Steam Car Compound 1000 Cylinder Oil is for use in most Locomotives and Stationary engines working with either saturated or superheated steam.
Terralus BVG Hydraulic Oils are a range of readily biodegradable hydraulic oils manufactured to meet the requirements of hydraulic systems in industrial, horticultural and earth moving equipment. This range is mineral oil free and has been specially developed to meet concern over the inevitable spills, leakages and total system losses that frequently occur from burst hoses on hard worked hydraulic
Through its exceptional balance of cooling and lubricating properties, it has the outstanding ability to produce ultra-fine surface finishes. The product may be used on all metal types with the exception of hard metal carbides, and is especially recommended for non-metals, composites and glasses.Supergrind Ultra is ideal for surface grinding and roll grinding and may be used for ultra high speed machining
This oil is for use in most Locomotives and Stationary engines working with either saturated or superheated steam. It is produced from special cylinder stock treated with fatty compounds and particularly Tallow to provide superior lubrication even if wet conditions are encountered. The fatty compounds form emulsions which spread the oil on the internal surfaces, providing a strong lubricating film
This range is mineral oil free and has been specially developed to meet concern over the inevitable spills, leakages and total system losses that frequently occur from burst hoses on hard worked hydraulic equipment. This is particularly important if hydraulic equipment is working where soil or water contamination is a possibility. In addition to the problem of mineral oil pollution, there is now evidence
Morris Cora B is suited to general machining operations on ferrous metals up to medium tensile steels and non-ferrous metals. The additive system ensures improved surface finish and tool life whilst remaining non-staining to copper and its alloys.
A solvent deposited, medium term rust preventative with water displacing properties providing a thin grease film when dry. Ankor C has good operator acceptability due to its low odour and ease of application by dipping, brushing or spraying
F402 is a NSF: H1 registered, spray-formulated, water resistant lubricant for use on roller and needle bearings and chains. Suitable for Food & Beverage, Packaging, Pharmaceutical and other cleanroom environments.
Morris Lubricants Liquimatic XT284 is recommended for use in highly stressed plant and off-highway transmission systems incorporating wet brake technology
Faracut HS3 is a highly refined cutting oil with special lubricity additives to enhance cutting without the use of Chlorine, Sulphur or Phosphorus
Premier Lubricants Grindsol 495 Plus is a completely Amine free grinding fluid that forms a clear fluorescent solution.
SUPERCUT 3000 is a micro-emulsion metalworking fluid that is readily miscible with most mains water producing a transparent blue emulsion that is suited to a wide variety of applications.
Largo Mineral Oils are a versatile range of oils which can be used wherever a straight mineral oil has been specified. Particularly recommended for lightly loaded industrial equipment with circulating systems, oil baths, automatic lubricators, wick oilers, spray, splash and mist lubricators
Morris Heavy Liquid Paraffin is a highly refined medicinal white oil grade that is water white in colour, odourless and tasteless. This product is extremely stable and will not break down or form sludges.
This product has a very low surface tension and viscosity and therefore spreads rapidly, penetrating into all hard to reach parts and covering all surfaces however irregular. It dried to leave a continuous protective coating of viscous petroleum products and additives that have powerful rust preventative properties. This product is particularly useful where the metal parts to be treated
A low oil content semi-synthetic cutting fluid, incorporating the latest in formaldehyde and boron-free technology.
Morris Multivis ADT C3 5W-40 is a mid-SAPS synthetic technology engine oil formulated to meet the
demands and fuel efficiency expectations of the latest petrol and diesel engines, where a lowviscosity oil is required.
Formulated for applications involving high removal rates of ferrous and non-ferrous materials. Due to the unique formulation, this product combines properties which ensure extremely good flushing performance coupled with low foaming characteristics that allow the fluid to stay clear and clean.Supergrind MP is part of the new generation of grinding fluids which are nitrite, mineral oil, sulphur, chlorine
Invert emulsion type fire resistant hydraulic fluid, VG46
The Alto range of machine oils contain anti-rust and antioxidant additives (R&O) that are blended into high quality mineral oils that possess good natural lubricating properties enhanced by modern refining techniques. They have good viscosity indices and separate from water cleanly and quickly.
Ankor ST is a solvent deposited, short to medium term rust preventative, for use on components that are exposed for relatively short time periods or in less harsh environments. This product has low surface tension and viscosity and therefore spreads rapidly, penetrating into less accessible areas and covering all surfaces however irregular. It dries to leave a continuous protective coating
This oil has been manufactured for the special requirements of these engines using today’s technology and materials. The traditional technology used in this oil provides outstanding, resistance to rust, corrosion, wear and oxidation, even in the presence of water. This oil also has a high viscosity index, giving good flow rates to bearings and all moving parts at low start up temperatures, coupled
Terrain LS 80W-90 has been specifically designed for use in limited slip differentials and wet brake systems fitted to off-highway and agricultural equipment. where differential loadings are high and where a variety of operating conditions may be encountered.
A fully synthetic (mineral oil free) metalforming fluid with very high lubricity. This makes it suitable for a wide range of applications and metals.
Minimum quantity for "Premier Super-Synth 1005" is 8.
Agrimax® STF60 is a multifunction fluid formulated with high quality base oils and specialised additives for use in the transmission and hydraulics of agricultural, plant and material handling equipment
PURITY FG WO oils may be safely used where an approved food grade or inert white mineral oil is required. General applications include incidental food contact in producing, manufacturing, processing, treating or packaging food. Specific applications include: • Rust and corrosion prevention for knives and cutting tables used in food preparation • Release agents for molds and bakery pans • Plasticizers • Moisture resistant coatings on food packaging • Dust suppressants • Cleaning agent for stainless steel • Shell egg protecting oil to retain freshness (15 grade only) Prior to application (spraying) of the products in food handling areas, all food products should either be removed from the vicinity or otherwise protected from the spray.
Morris Lubricants Transformer Oil is a highly refined naphthenic product for use solely in oil filled transformers and other electrical equipment. The base stock and refining process has been specifically chosen to produce a long life product free of oxidation and sludging tendencies.
Morris Race ATV 10W-40 is recommended for use in all-terrain vehicles, quad bikes, generator sets and other ancillary equipment, where a product of this type and viscosity grade is specified.
Mobil Delvac XHPTM ESP FE 5W-30 is an extra high performance diesel engine oil engineered to provide outstanding protection and fuel economy potential* in modern, high performance, low emission engines used in severe on-highway applications.
A light coloured medium viscosity neat cutting oil, designed for general purpose light duty machining operations.
This is a low viscosity water white mineral oil specially prepared as a reference fluid for diesel injection testing equipment. A fluid such as Seria Fuel Pump Test Oil is produced to very close specification limits, which are essential for accurate and consistent results in test equipment. It is not possible to perform these testing procedures with diesel fuels that can vary considerably in viscosity
Recommended for both Industrial and off highway hydraulic systems, where extreme operating conditions are encountered. Can also be used in hydrostatic drives, power steering systems, brake systems and other applications where products of this type and specification required.
Race Super 4 10W-40 provides a level of overall protection that ensures efficient engine and gearbox operation, whether through the town, countryside or motorway. Ideal for commuters and for riders who take to the open roads at the weekend.
Contains high levels of extreme pressure and lubricity additives thereby making it suitable for many arduous applications on hardened ferrous metals, high alloy steels and stainless. Despite its high EP loading Marcia T is a light coloured, low odour product, and hence has better operator acceptability than traditional products based on sulphurised fats.The high levels of EP and lubricity additives
Crystal White Oils are highly refined medicinal grades, that are water white in colour, odourless and tasteless. These products are extremely stable and will not break down or form sludges. Category Code: H1, HX-1, 3H
Specially selected base oils and additives ensure a low misting potential in use, whilst also ensuring excellent flushing of honing stones and excellent swarf separation. Marcia H may also be utilised in a number of light to medium duty applications involving free cutting ferrous alloys.
A range of gear oils, combining high quality mineral oils and extreme pressure (EP) additives for use in industrial gear systems. Lodexol Industrial Gear Oils have high load carrying capability and are formulated to protect against wear, oxidation, foam, rust and corrosion.
Liquimatic VG5 is a low viscosity hydraulic oil blended from high quality mineral oils and a balanced additive system. It possesses excellent lubricating properties, with reduced oil mist and demulsification performance.
F404 is a general purpose food grade lubricant for use in and around food processing areas, for the lubrication of cables, chains, castors, hinges, bearings and pins.
Morris Versimax HD14 10W-30 is designed for use in Euro 5 / Euro 6, Interim Tier 4 / Stage 3B / Tier 4 and Stage 4 diesel engines
A high performance neat cutting oil specifically developed for use on severe applications.
Advanced mineral oil based gear oil providing total driveline protection in gearboxes and differentials. Meets the following specifications:
F408 Chain Spray is a NSF: H1 registered food grade chain spray suitable for use within Food & Beverage, Packaging, Pharmaceutical and other cleanroom environments.
When mixed with water Supercut 1000 forms a stable milky emulsion which can be used in most conventional machining operations. Unison Edgeplus is a cost effective product that exhibits excellent corrosion protection and exceptional service life for a conventional fluid of this type.
NEVASTANE AW oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP. Excellent anti-wear and corrosion protection.Miscible with mineral fluids.
Astra Slideway Lubricants have been specifically developed for the lubrication of machine tool slideways and tables. They have been formulated from high quality mineral oil, performance additives and incorporate a tackifier to ensure that the lubricant adheres to the moving parts at all times. The performance additives provide outstanding resistance to oxidation, corrosion and wear and eliminate stick
A range of industrial gear oils, combining high quality mineral oils and extreme pressure (EP) additives, intended for use in industrial gear systems of the spur, helical and straight and spiral bevel types. Lodexol Industrial Gear Oils have high load carrying capability and ensure 'clean’ gear performance under conditions of high temperature and oxidation. Additionally these grades provide strong protection against wear, oxidation, foam, rust and corrosion.
NEVASTANE AW oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP.Excellent anti-wear and corrosion protection.Miscible with mineral fluids.
Versimax HD17 5W-30 is designed for use in diesel engines meeting Euro IV, V and VI emission requirements where an oil of this quality is specified.
F406 is is a NSF: K2 registered quick drying solvent cleaner suitable for use within Food & Beverage, Packaging, Pharmaceutical and other cleanroom environments.